Rappler (Philippines)
중도 성향
IT/기술
FACT CHECK: Video of ICC judge saying Duterte should not be imprisoned is AI-generated
No official records or reports from the International Criminal Court indicate that Judge Joanna Korner made the supposed remark
IT/기술 · "RECORDS" · 총 19건
필터 보기현재 지수
50.3
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 85,800건을 분석한 결과, 뉴스 심리지수는 50.2(균형)입니다. 긍정 4,341건(5.1%)·중립 79,332건(92.5%)·부정 2,127건(2.5%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 14.7(중도 균형)입니다.
No official records or reports from the International Criminal Court indicate that Judge Joanna Korner made the supposed remark
Pips Accenture and NEC to bag decade-long deal for cops across England, Wales, and beyond
Sentri7, drug diversion software powered by artificial intelligence and used at hundreds of U.S. hospitals, did not catch a months-long string of fentanyl thefts in Tennessee in 2025, according to a state document.
A cybersecurity disclosure has placed infrastructure linked to JEE Advanced 2026 under scrutiny after researcher Rylen Anil alleged that a cloud storage configuration exposed thousands of candidate-related records and admit-card PDFs. IIT Roorkee, the organising institute, acknowledged the configuration issue and said corrective action was being taken. The development comes amid recent cybersecurity concerns involving CBSE's On-Screen Marking system and NTA's re-examination portal, highlighting growing attention on data security across India's examination ecosystem.
An AI-powered medication monitoring system failed to detect months of fentanyl theft by a nurse at Tennessee's largest hospital in Chattanooga, according to state nursing board records that raise questions about the effectiveness of artificial intelligence systems used in hundreds of American hospitals. The post AI Drug Monitoring System Failed to Detect Nurse’s Fentanyl Theft at Tennessee Hospital appeared first on Breitbart.
A database containing 64,000 user records was published to GitHub after an attacker claimed to have compromised all Atlas systems
Sentri7, drug diversion software powered by artificial intelligence and used at hundreds of U.S. hospitals, did not catch a monthslong string of fentanyl thefts in Tennessee in 2025, according to a state document.
Prosecutors say the false NAIT records left animals effectively untraceable.
Comments
A study of 650 million hiring records says remote work is the culprit. But the Wharton professor who wrote the book against remote work isn't so sure.
Telco giant says no sensitive data was taken, though names, addresses, phones, and emails are now out there
African governments generate vast quantities of citizen data, from health records to tax filings, land registries and school enrolments. Much of it leaves the continent to be processed, modelled and monetised on foreign infrastructure. The insight comes back at a premium, while the economic value remains elsewhere — and AI is accelerating this. However, this […]
Travel and leisure giant was just one of many victims of the cybercrooks' crime spree this year
The founder of a fast-rising Chinese tech firm has become known as China’s “crazy boss” after a string of online stunts. Yu Hao, 39, from Jiangsu province in eastern China, is the founder and CEO of Dreame Technology, a smart home appliance maker best known for high-end robot vacuum cleaners. Founded in 2017, Dreame has grown rapidly in China’s crowded smart appliance sector. Public records show the company was once valued at about 45 billion yuan (US$6.6 billion) and it is reportedly aiming for...
Roger Linn is a legend in the world of musical instruments. He's been at the cutting edge of music technology for decades. He created the LM-1, the first drum machine to use samples, and its successor, the LinnDrum, is one of the most iconic drum machines of all time. They were used on countless records […]
There is a harsh truth about Elon Musk's "truth-seeking" AI chatbot Grok: It's not very good, and not many people are using it. That's the takeaway of a new Reuters report, which found that Grok barely appears in federal records of how the US government used AI last year. It's not the only sign xAI's […]
For years, the field of robotics has used the terms “dull, dirty, and dangerous” (DDD) to describe the types of tasks or jobs where robots might be useful—by doing work that’s undesirable for people. A classic example of a DDD job is one of “repetitive physical labor on a steaming hot factory floor involving heavy machinery that threatens life and limb.” But determining which human activities fit into these categories is not as straightforward as it seems. What exactly is a “dull” task, and who makes that assumption? Is “dirty” work just about needing to wash your hands afterwards, or is there also an aspect of social stigma? What data can we rely on to classify jobs as “dangerous?” Our recent work (which was not dull at all) tackles these questions and proposes a framework to help roboticists understand the job context for our technology. First, we did an empirical analysis of robotics publications between 1980 and 2024 that mention DDD and found that only 2.7 percent define DDD and only 8.7 percent provide examples of tasks or jobs. The definitions vary, and many of the examples aren’t particularly specific (for example, “industrial manufacturing,” “home care”). Next, we reviewed the social science literature in anthropology, economics, political science, psychology, and sociology to develop better definitions for “dull,” “dirty,” and “dangerous” work. Again, while it might seem intuitive which tasks to put into these buckets, it turns out that there are some underlying social, economic, and cultural factors that matter. Dangerous Work: Occupations or tasks that result in injury or risk of harm It’s possible to measure the danger of a task or job by using reported information. There are administrative records and surveys that provide numbers on occupational injury rates and hazardous risk factors. While that seems straightforward, it’s important to understand how this data was collected, reported, and verified. First, occupational injuries tend to be underreported, with some studies estimating up to 70 percent of cases missing in administrative databases. Second, injuries and risk factors are rarely disaggregated by characteristics like gender, migration status, formal/informal employment, and work activities. For example, because most personal protective equipment—such as masks, vests, and gloves—are sized for men, women in dangerous work environments face increased safety risks. These caveats are an opportunity for robotics to be helpful. If we went out and looked for it, we could probably find some less obviously dangerous work where robotics might be an important intervention, not to mention some groups that are disproportionately affected and would benefit from more workplace safety. Dirty Work: Occupations or tasks that are physically, socially, or morally tainted Colloquially, most people might think of dirty work as involving physical dirtiness, such as trash removal, cleaning, or dealing with hazardous substances. But social science literature makes clear that dirty work is also about stigma. Socially tainted jobs are often servile or involve interacting with stigmatized groups (for example, correctional officers), and morally tainted jobs include tasks that people commonly perceive as sinful, deceptive, or otherwise defying norms of civility (like a stripper or a collection agent). “Dirty work” is a social construct that can vary across time (like tattoo industry stigma in the United States) and culture (such as nursing in the U.S. versus in Bangladesh). One way to measure whether work is “dirty” is by using the closely related concept of occupational prestige, captured through quantitative surveys where people rank jobs. Another way to measure it is through qualitative data, like ethnographies and interviews. Similar to “dangerous,” we see some hidden opportunities for robotics in “dirty” work. But one of our more interesting takeaways from the data is that a lower-ranked job can be something that the workers themselves enjoy or find immense pride and meaning in. If we care about what tasks are truly undesirable, understanding this worker perspective is important. Dull Work: Occupations or tasks that are repetitive and lacking in autonomy When it comes to defining dull work, what matters most is workers’ own experiences. Outsiders can make a lot of false assumptions about what tasks have value and meaning. Sometimes things that seem boring or routine create the right conditions for developing skills and competence, such as the concentration needed for woodworking, or for socializing and support, when tasks are done alongside others. Instead of assuming that repetitive work is negative, it’s important to examine qualitative data on how people experience the work and what purpose it serves for them. DDD: An actionable framework In our paper, we propose a framework to help the robotics community explore how automation impacts individual jobs. For each term—dull, dirty, and dangerous—the framework gathers key pieces of information to reflect on what physical or social aspects of the task are, in fact, DDD. Worker perspective is an important part of all three considerations. The framework also emphasizes awareness of context—meaning the physical and social environment of an occupation and industry that can influence the DDD nature of a task. Our corresponding worksheet suggests existing data sources to draw on and encourages us to seek out multiple perspectives and consider potential sources of bias in the information. What makes tasks dull, dirty, or dangerous depends on the perspective of the humans doing those tasks.RAI Let’s take, for example, the waste and recycling industry. The world generates over 2 billion tonnes of waste annually, and this figure is expected to rise to nearly 4 billion tonnes by 2050. Intuitively, trash collection seems like a job that hits all the Ds. Going through our worksheet, we confirm that globally, workers in this industry face significant health hazards (dangerous), and waste collection is ranked as a low-status job (dirty), although interestingly, many workers take pride in providing this essential service. The job is also repetitive, but there are aspects that make it not dull. Specifically, workers cite the day-to-day interaction with their coworkers (which includes extensive insider vocabulary, work hacks, and mutual aid groups) and task variety as two of the most enjoyable aspects of the job. Task variety includes inspecting their vehicle and equipment, driving their truck, coordinating with crew members, lifting bins and bags, detecting incorrect sorting of waste, and unloading at the end destination. This finding matters because some types of robotic solutions will eliminate the parts of the job that workers most appreciate. For instance, the National Institute for Occupational Safety and Health (NIOSH) recommends the adoption of automated side loader trucks and collision avoidance systems. This innovation increases safety, which is great, but it also results in a sole worker operating a joystick in a cab, surrounded by sensor and camera surveillance. Instead, we should challenge ourselves to think of solutions that make jobs safer without making them terrible in a different way. To do this, we need to understand all aspects of what makes a job dull, dirty, or dangerous (or not). Our framework aims to facilitate this understanding. Finally, it’s important to note that DDD is only one of many possible approaches to classify what work might be better served by robots. There are lots of ways we could think about which types of tasks or jobs to automate (for example, economic impact or environmental sustainability). Given the popularity of DDD in robotics, we chose this common phrase as a starting point. We would love to see more work in this space, whether it’s data collection on DDD itself or the creation of other frameworks. At RAI, we believe that the fusion of robotics and social sciences opens a whole new world of information, perspectives, opportunities, and value. It fosters a culture of curiosity and mutual learning, and allows us to create actionable tools for anyone in robotics who cares about societal impact. Dull, Dirty, Dangerous: Understanding the Past, Present, and Future of a Key Motivation for Robotics, by Nozomi Nakajima, Pedro Reynolds-Cuéllar, Caitrin Lynch, and Kate Darling from the RAI Institute, was presented at the 21st ACM/IEEE International Conference on Human-Robot Interaction (HRI) in Edinburgh, Scotland.
This article is brought to you by DAIMON Robotics. This April, Hong Kong-based DAIMON Robotics has released Daimon-Infinity, which it describes as the largest omni-modal robotic dataset for physical AI, featuring high resolution tactile sensing and spanning a wide range of tasks from folding laundry at home to manufacturing on factory assembly lines. The project is supported by collaborative efforts of partners across China and the globe, including Google DeepMind, Northwestern University, and the National University of Singapore. The move signals a key strategic initiative for DAIMON, a two-and-a-half-year-old company known for its advanced tactile sensor hardware, most notably a monochromatic, vision-based tactile sensor that packs over 110,000 effective sensing units into a fingertip-sized module. Drawing on its high-resolution tactile sensing technology and a distributed out-of-lab collection network capable of generating millions of hours of data annually, DAIMON is building large-scale robot manipulation datasets that include vast amounts of tactile sensing data. To accelerate the real-world deployment of embodied AI, the company has also open-sourced 10,000 hours of its data. Prof. Michael Yu Wang, co-founder and chief scientist at DAIMON Robotics, has pioneered Vision-Tactile-Language-Action (VTLA) architecture, elevating the tactile to a modality on par with vision.DAIMON Robotics Behind the strategy is Prof. Michael Yu Wang, DAIMON’s co-founder and chief scientist. Prof. Wang earned his PhD at Carnegie Mellon — studying manipulation under Matt Mason — and went on to found the Robotics Institute at the Hong Kong University of Science and Technology. An IEEE Fellow and former Editor-in-Chief of IEEE Transactions on Automation Science and Engineering, he has spent roughly four decades in the field. His objective is to address the missing “insensitivity” of robot manipulation, which practically relies on the dominant Vision-Language-Action (VLA) model. He and his team have pioneered Vision-Tactile-Language-Action (VTLA) architecture, elevating the tactile to a modality on par with vision. We spoke with Prof. Wang about how tactile feedback aims to change dexterous manipulation, how the dataset initiative is foreseen to improve our understanding of robotic hands in natural environments, and where — from hotels to convenience stores in China — he sees touch-enabled robots making their first real-world inroads. Daimon-Infinity is the world’s largest omni-modal dataset for Physical AI, featuring million-hour scale multimodal data, ultra-high-res tactile feedback, data from 80+ real scenarios and 2,000+ human skills, and more.DAIMON Robotics The Dataset Initiative This month, DAIMON Robotics released the largest and most comprehensive robotic manipulation dataset with multiple leading academic institutions and enterprises. Why releasing the dataset now, rather than continuing to focus on product development? What impact will this have on the embodied intelligence industry? DAIMON Robotics has been around for almost two and a half years. We have been committed to developing high-resolution, multimodal tactile sensing devices to perceive the interaction between a robot’s hand (particularly its fingertips) and objects. Our devices have become quite robust. They are now accepted and used by a large segment of users, including academic and research institutes as well as leading humanoid robotics companies. As embodied AI continues to advance, the critical role of data has been clearer. Data scarcity remains a primary bottleneck in robot learning, particularly the lack of physical interaction data, which is essential for robots to operate effectively in the real world. Consequently, data quality, reliability, and cost have become major concerns in both research and commercial development. This is exactly where DAIMON excels. Our vision-based tactile technology captures high-quality, multimodal tactile data. Beyond basic contact forces, it records deformation, slip and friction, material properties and surface textures — enabling a comprehensive reconstruction of physical interactions. Building on our expertise in multimodal fusion, we have developed a robust data processing pipeline that seamlessly integrates tactile feedback with vision, motion trajectories, and natural language, transforming raw inputs into training-ready dataset for machine learning models. Recognizing the industry-wide data gap, we view large-scale data collection not only as our unique competitive advantage, but as a responsibility to the broader community. By building and open-sourcing the dataset, we aim to provide the high-quality “fuel” needed to power embodied AI, ultimately accelerating the real-world deployment of general-purpose robotic foundation models. The robotics industry is highly competitive, and many teams have chosen to focus on data. DAIMON is releasing a large and highly comprehensive cross-embodiment, vision-based tactile multimodal robotic manipulation dataset. How were you able to achieve this? We have a dedicated in-house team focused on expanding our capabilities, including building hardware devices and developing our own large-scale model. Although we are a relatively small company, our core tactile sensing technology and innovative data collection paradigm enable us to build large-scale dataset. Our approach is to broaden our offering. We have built the world’s largest distributed out-of-lab data collection network. Rather than relying on centralized data factories, this lightweight and scalable system allows data to be gathered across diverse real-world environments, enabling us to generate millions of hours of data per year. “To drive the advancement of the entire embodied AI field, we have open-sourced 10,000 hours of the dataset for the broader community.” —Prof. Michael Yu Wang, DAIMON Robotics This dataset is being jointly developed with several institutions worldwide. What roles did they play in its development, and how will the dataset benefit their research and products? Besides China based teams, our partners include leading research groups from universities, such as Northwestern University and the National University of Singapore, as well as top global enterprises like Google DeepMind and China Mobile. Their decision to partner with DAIMON is a strong testament to the value of our tactile-rich dataset. Among the companies involved there are some that have already built their own models but are now incorporating tactile information. By deploying our data collection devices across research, manufacturing and other real-world scenarios, they help us to gather highly practical, application-driven data. In turn, our partners leverage the data to train models tailored to their specific use cases. Furthermore, to drive the advancement of the entire embodied AI field, we have open-sourced 10,000 hours of the dataset for the broader community. Equipped with Daimon’s visuotactile sensor, the gripper delicately senses contact and precisely controls force to pick up a fragile eggshell.Daimon Robotics From VLA to VTLA: Why Tactile Sensing Changes the Equation The mainstream paradigm in robotics is currently the Vision-Language-Action (VLA) model, but your team has proposed a Vision-Tactile-Language-Action (VTLA) model. Why is it necessary to incorporate tactile sensing? What does it enable robots to achieve, and which tasks are likely to fail without tactile feedback? Over these years of working to make generalist robots capable of performing manipulation tasks, especially dexterous manipulation — not just power grasping or holding an object, but manipulating objects and using tools to impart forces and motion onto parts — we see these robots being used in household as well as industrial assembly settings. It is well established that tactile information is essential for providing feedback about contact states so that robots can guide their hands and fingers to perform reliable manipulation. Without tactile sensing, robots are severely limited. They struggle to locate objects in dark environments, and without slip detection, they can easily drop fragile items like glass. Furthermore, the inability to precisely control force often leads to failed manipulation tasks or, in severe cases, physical damage. Naturally, the VLA approach needs to be enhanced to incorporate tactile information. We expanded the VLA framework to incorporate tactile data, creating the VTLA model. An additional benefit of our tactile sensor is that it is vision-based: We capture visual images of the deformation on the fingertip surface. We capture multiple images in a time sequence that encodes contact information, from which we can infer forces and other contact states. This aligns well with the visual framework that VLA is based upon. Having tactile information in a visual image format makes it naturally suitable for integration into the VLA framework, transforming it into a VTLA system. That is the key advantage: Vision-based tactile sensors provide very high resolution at the pixel level, and this data can be incorporated into the framework, whether it is an end-to-end model or another type of architecture. DAIMON has been known for its vision-based tactile sensors that can pack over 110,000 effective sensing units.DAIMON Robotics The Technology: Monochromatic Vision-based Tactile Sensing You and your team have spent many years deeply engaged in vision-based tactile sensing and have developed the world’s first monochromatic vision-based tactile sensing technology. Why did you choose this technical path? Once we started investigating tactile sensors, we understood our needs. We wanted sensors that closely mimic what we have under our fingertip skin. Physiological studies have well documented the capabilities humans have at their fingertips — knowing what we touch, what kind of material it is, how forces are distributed, and whether it is moving into the right position as our brain controls our hands. We knew that replicating these capabilities on a robot hand’s fingertips would help considerably. When we surveyed existing technologies, we found many types, including vision-based tactile sensors with tri-color optics and other simpler designs. We decided to integrate the best of these into an engineering-robust solution that works well without being overly complicated, keeping cost, reliability, and sensitivity within a satisfactory range, thus ultimately developing a monochromatic vision-based tactile sensing technique. This is fundamentally an engineering approach rather than a purely scientific one, since a great deal of foundational research already existed. With the growing realization of the necessity of tactile data, all of this will advance hand in hand. DAIMON vision-based tactile sensor captures high-quality, multimodal tactile data.DAIMON Robotics Last year, DAIMON launched a multi-dimensional, high-resolution, high-frequency vision-based tactile sensor. Compared with traditional tactile sensors, where does its core advantage lie? Which industries could it potentially transform? The key features of our sensors are the density of distributed force measurement and the deformation we can capture over the area of a fingertip. I believe we have the highest density in terms of sensing units. That is one very important metric. The other is dynamics: the frequency and bandwidth — how quickly we can detect force changes, transmit signals, and process them in real time. Other important aspects are largely engineering-related, such as reliability, drift, durability of the soft surface, and resistance to interference from magnetic, optical, or environmental factors. A growing number of researchers and companies are recognizing the importance of tactile sensing and adopting our technology. I believe the advances in tactile sensing will elevate the entire community and industry to a higher level. One of our potential customers is deploying humanoid robots in a small convenience store, with densely packed shelves where shelf space is at a premium. The robot needs to reach into very tight spaces — tighter than books on a shelf — to pick out an object. Current two-jaw parallel grippers cannot fit into most of these spaces. Observing how humans pick up objects, you clearly need at least three slim fingers to touch and roll the object toward you and secure it. Thus, we are starting to see very specific needs where tactile sensing capabilities are essential. From Academia to Startup After 40 years in academia — founding the HKUST Robotics Institute, earning prestigious honors including IEEE Fellow, and serving as Editor-in-Chief of IEEE TASE — what motivated you to found DAIMON Robotics? I have come a long way. I started learning robotics during my PhD at Carnegie Mellon, where there were truly remarkable groups working on locomotion under Marc Raibert, who founded Boston Dynamics, and on manipulation under my advisor, Matt Mason, a leader in the field. We have been working on dexterous manipulation, not only at Carnegie Mellon, but globally for many years. However, progress has been limited for a long time, especially in building dexterous hands and making them work. Only recently have locomotion robots truly taken off, and only in the last few years have we begun to see major advancements in robot hands. There is clearly room for advancing manipulation capabilities, which would enable robots to do work like humans. While at Hong Kong University of Science and Technology, I saw increasingly greater people entering this area in the form of students and postdoctoral researchers. We wanted to jumpstart our effort by leveraging the available capital and talent resources. Fortunately, one of my postdocs, Dr. Duan Jianghua, has a strong sense for commercial opportunities. Recognizing the rapid growth of robotics market and the unique value that our vision-based tactile sensing technology could bring, together we started DAIMON Robotics, and it has progressed well. The community has grown tremendously in China, Japan, Korea, the U.S., and Europe. Robots equipped with DAIMON technology have been deployed in factory settings. The company aims to enable robots to achieve “embodied intelligence” and close the gap between what they can see and what they can feel.DAIMON Robotics Business Model and Commercial Strategy What is DAIMON’s current business model and strategic focus? What role does the dataset release play in your commercial strategy? We started as a device company focused on making highly capable tactile sensors, especially for robot hands. But as technology and business developed, everyone realized it is not just about one component, rather the entire technology chain: devices, data of adequate quality and quantity, and finally the right framework to build, train, and deploy models on robots in real application environments. Our business strategy is best described as “3D”: Devices, Data, and Deployment. We build devices for data collection, our own ecosystem, and for deploying them in our partners’ potential application domains. This enables the collection of real-world tactile-rich data and complete closed-loop validation. This will become an integral part of the 3D business model. Most startups in this space are following a similar path until eventually some may become more specialized or more tightly integrated with other companies. For now, it is mostly vertical integration. Embodied Skills and the Convergence Moment You’ve introduced the concept of “embodied skills” as essential for humanoid robots to move beyond having just an advanced AI “brain.” What prompted this insight? What new capabilities could embodied skills enable? After the rapid evolution of models and hardware over the past two years, has your definition or roadmap for embodied skills evolved? We have come a long way now see a convergence point where electrical, electronic, and mechatronic hardware technologies have advanced tremendously in last two decades. Robots are now fully electric, do not require hydraulics, because hardware has evolved rapidly. Modern electronics provide tremendous bandwidth with high torques. If we can build intelligence into these systems, we can create truly humanoid robots with the ability to operate in unstructured environments, make decisions, and take actions autonomously. “Our vision is for robots to achieve robust manipulation capabilities and evolve into reliable partners for humans.” —Prof. Michael Yu Wang, DAIMON Robotics AI has arrived at exactly the right time. Enormous resources have been invested in AI development, especially large language models, which are now being generalized into world models that enable physical AI capabilities. We would like to see these manifested in real-world systems. While both AI and core hardware technologies continue to evolve, the focus is much clearer now. For example, human-sized robots are preferred in a home environment. This is an exciting domain with a promise of great societal benefit if we can eventually achieve safe, reliable, and cost-effective robots. The Road to Real-World Deployment Today, many robots can deliver impressive demos, yet there remains a gap before they truly enter real-world applications. What could be a potential trigger for real-world deployment? Which scenarios are most likely to achieve large-scale deployment first? I think the road toward large-scale deployment of generalist robots is still long, but we are starting to see signs of feasibility within specific domains. It is very similar to autonomous vehicles, where we are yet to see full deployment of robo-taxis, while we have already started to find mobile robots and smaller vehicles widely deployed in the hospitality industry. Virtually every major hotel in China now has a delivery robot — no arms, just a vehicle that picks up items from the hotel lobby (e.g., food deliveries). The delivery person just loads the food and selects the room number. It is up to the robot thereafter to navigate and reach the guest’s room, which includes using the elevator, to deliver the food. This is already nearly 100 percent deployed in major Chinese hotels. Hotel and restaurant robots are viewed as a model for deploying humanoid robots in specific domains like overnight drugstores and convenience stores. I expect complete deployment in such settings within a short timeframe, followed by other applications. Overall, we can expect autonomous robots, including humanoids, to progressively penetrate specific sectors, delivering value in each and expanding into others. Ultimately, our vision is for robots to achieve robust manipulation capabilities and evolve into reliable partners for humans. By seamlessly integrating into our homes and daily lives, they will genuinely benefit and serve humanity. This interview has been edited for length and clarity.
Andrew Ng has serious street cred in artificial intelligence. He pioneered the use of graphics processing units (GPUs) to train deep learning models in the late 2000s with his students at Stanford University, cofounded Google Brain in 2011, and then served for three years as chief scientist for Baidu, where he helped build the Chinese tech giant’s AI group. So when he says he has identified the next big shift in artificial intelligence, people listen. And that’s what he told IEEE Spectrum in an exclusive Q&A. Ng’s current efforts are focused on his company Landing AI, which built a platform called LandingLens to help manufacturers improve visual inspection with computer vision. He has also become something of an evangelist for what he calls the data-centric AI movement, which he says can yield “small data” solutions to big issues in AI, including model efficiency, accuracy, and bias. Andrew Ng on... What’s next for really big models The career advice he didn’t listen to Defining the data-centric AI movement Synthetic data Why Landing AI asks its customers to do the work The great advances in deep learning over the past decade or so have been powered by ever-bigger models crunching ever-bigger amounts of data. Some people argue that that’s an unsustainable trajectory. Do you agree that it can’t go on that way? Andrew Ng: This is a big question. We’ve seen foundation models in NLP [natural language processing]. I’m excited about NLP models getting even bigger, and also about the potential of building foundation models in computer vision. I think there’s lots of signal to still be exploited in video: We have not been able to build foundation models yet for video because of compute bandwidth and the cost of processing video, as opposed to tokenized text. So I think that this engine of scaling up deep learning algorithms, which has been running for something like 15 years now, still has steam in it. Having said that, it only applies to certain problems, and there’s a set of other problems that need small data solutions. When you say you want a foundation model for computer vision, what do you mean by that? Ng: This is a term coined by Percy Liang and some of my friends at Stanford to refer to very large models, trained on very large data sets, that can be tuned for specific applications. For example, GPT-3 is an example of a foundation model [for NLP]. Foundation models offer a lot of promise as a new paradigm in developing machine learning applications, but also challenges in terms of making sure that they’re reasonably fair and free from bias, especially if many of us will be building on top of them. What needs to happen for someone to build a foundation model for video? Ng: I think there is a scalability problem. The compute power needed to process the large volume of images for video is significant, and I think that’s why foundation models have arisen first in NLP. Many researchers are working on this, and I think we’re seeing early signs of such models being developed in computer vision. But I’m confident that if a semiconductor maker gave us 10 times more processor power, we could easily find 10 times more video to build such models for vision. Having said that, a lot of what’s happened over the past decade is that deep learning has happened in consumer-facing companies that have large user bases, sometimes billions of users, and therefore very large data sets. While that paradigm of machine learning has driven a lot of economic value in consumer software, I find that that recipe of scale doesn’t work for other industries. Back to top It’s funny to hear you say that, because your early work was at a consumer-facing company with millions of users. Ng: Over a decade ago, when I proposed starting the Google Brain project to use Google’s compute infrastructure to build very large neural networks, it was a controversial step. One very senior person pulled me aside and warned me that starting Google Brain would be bad for my career. I think he felt that the action couldn’t just be in scaling up, and that I should instead focus on architecture innovation. “In many industries where giant data sets simply don’t exist, I think the focus has to shift from big data to good data. Having 50 thoughtfully engineered examples can be sufficient to explain to the neural network what you want it to learn.” —Andrew Ng, CEO & Founder, Landing AI I remember when my students and I published the first NeurIPS workshop paper advocating using CUDA, a platform for processing on GPUs, for deep learning—a different senior person in AI sat me down and said, “CUDA is really complicated to program. As a programming paradigm, this seems like too much work.” I did manage to convince him; the other person I did not convince. I expect they’re both convinced now. Ng: I think so, yes. Over the past year as I’ve been speaking to people about the data-centric AI movement, I’ve been getting flashbacks to when I was speaking to people about deep learning and scalability 10 or 15 years ago. In the past year, I’ve been getting the same mix of “there’s nothing new here” and “this seems like the wrong direction.” Back to top How do you define data-centric AI, and why do you consider it a movement? Ng: Data-centric AI is the discipline of systematically engineering the data needed to successfully build an AI system. For an AI system, you have to implement some algorithm, say a neural network, in code and then train it on your data set. The dominant paradigm over the last decade was to download the data set while you focus on improving the code. Thanks to that paradigm, over the last decade deep learning networks have improved significantly, to the point where for a lot of applications the code—the neural network architecture—is basically a solved problem. So for many practical applications, it’s now more productive to hold the neural network architecture fixed, and instead find ways to improve the data. When I started speaking about this, there were many practitioners who, completely appropriately, raised their hands and said, “Yes, we’ve been doing this for 20 years.” This is the time to take the things that some individuals have been doing intuitively and make it a systematic engineering discipline. The data-centric AI movement is much bigger than one company or group of researchers. My collaborators and I organized a data-centric AI workshop at NeurIPS, and I was really delighted at the number of authors and presenters that showed up. You often talk about companies or institutions that have only a small amount of data to work with. How can data-centric AI help them? Ng: You hear a lot about vision systems built with millions of images—I once built a face recognition system using 350 million images. Architectures built for hundreds of millions of images don’t work with only 50 images. But it turns out, if you have 50 really good examples, you can build something valuable, like a defect-inspection system. In many industries where giant data sets simply don’t exist, I think the focus has to shift from big data to good data. Having 50 thoughtfully engineered examples can be sufficient to explain to the neural network what you want it to learn. When you talk about training a model with just 50 images, does that really mean you’re taking an existing model that was trained on a very large data set and fine-tuning it? Or do you mean a brand new model that’s designed to learn only from that small data set? Ng: Let me describe what Landing AI does. When doing visual inspection for manufacturers, we often use our own flavor of RetinaNet. It is a pretrained model. Having said that, the pretraining is a small piece of the puzzle. What’s a bigger piece of the puzzle is providing tools that enable the manufacturer to pick the right set of images [to use for fine-tuning] and label them in a consistent way. There’s a very practical problem we’ve seen spanning vision, NLP, and speech, where even human annotators don’t agree on the appropriate label. For big data applications, the common response has been: If the data is noisy, let’s just get a lot of data and the algorithm will average over it. But if you can develop tools that flag where the data’s inconsistent and give you a very targeted way to improve the consistency of the data, that turns out to be a more efficient way to get a high-performing system. “Collecting more data often helps, but if you try to collect more data for everything, that can be a very expensive activity.” —Andrew Ng For example, if you have 10,000 images where 30 images are of one class, and those 30 images are labeled inconsistently, one of the things we do is build tools to draw your attention to the subset of data that’s inconsistent. So you can very quickly relabel those images to be more consistent, and this leads to improvement in performance. Could this focus on high-quality data help with bias in data sets? If you’re able to curate the data more before training? Ng: Very much so. Many researchers have pointed out that biased data is one factor among many leading to biased systems. There have been many thoughtful efforts to engineer the data. At the NeurIPS workshop, Olga Russakovsky gave a really nice talk on this. At the main NeurIPS conference, I also really enjoyed Mary Gray’s presentation, which touched on how data-centric AI is one piece of the solution, but not the entire solution. New tools like Datasheets for Datasets also seem like an important piece of the puzzle. One of the powerful tools that data-centric AI gives us is the ability to engineer a subset of the data. Imagine training a machine-learning system and finding that its performance is okay for most of the data set, but its performance is biased for just a subset of the data. If you try to change the whole neural network architecture to improve the performance on just that subset, it’s quite difficult. But if you can engineer a subset of the data you can address the problem in a much more targeted way. When you talk about engineering the data, what do you mean exactly? Ng: In AI, data cleaning is important, but the way the data has been cleaned has often been in very manual ways. In computer vision, someone may visualize images through a Jupyter notebook and maybe spot the problem, and maybe fix it. But I’m excited about tools that allow you to have a very large data set, tools that draw your attention quickly and efficiently to the subset of data where, say, the labels are noisy. Or to quickly bring your attention to the one class among 100 classes where it would benefit you to collect more data. Collecting more data often helps, but if you try to collect more data for everything, that can be a very expensive activity. For example, I once figured out that a speech-recognition system was performing poorly when there was car noise in the background. Knowing that allowed me to collect more data with car noise in the background, rather than trying to collect more data for everything, which would have been expensive and slow. Back to top What about using synthetic data, is that often a good solution? Ng: I think synthetic data is an important tool in the tool chest of data-centric AI. At the NeurIPS workshop, Anima Anandkumar gave a great talk that touched on synthetic data. I think there are important uses of synthetic data that go beyond just being a preprocessing step for increasing the data set for a learning algorithm. I’d love to see more tools to let developers use synthetic data generation as part of the closed loop of iterative machine learning development. Do you mean that synthetic data would allow you to try the model on more data sets? Ng: Not really. Here’s an example. Let’s say you’re trying to detect defects in a smartphone casing. There are many different types of defects on smartphones. It could be a scratch, a dent, pit marks, discoloration of the material, other types of blemishes. If you train the model and then find through error analysis that it’s doing well overall but it’s performing poorly on pit marks, then synthetic data generation allows you to address the problem in a more targeted way. You could generate more data just for the pit-mark category. “In the consumer software Internet, we could train a handful of machine-learning models to serve a billion users. In manufacturing, you might have 10,000 manufacturers building 10,000 custom AI models.” —Andrew Ng Synthetic data generation is a very powerful tool, but there are many simpler tools that I will often try first. Such as data augmentation, improving labeling consistency, or just asking a factory to collect more data. Back to top To make these issues more concrete, can you walk me through an example? When a company approaches Landing AI and says it has a problem with visual inspection, how do you onboard them and work toward deployment? Ng: When a customer approaches us we usually have a conversation about their inspection problem and look at a few images to verify that the problem is feasible with computer vision. Assuming it is, we ask them to upload the data to the LandingLens platform. We often advise them on the methodology of data-centric AI and help them label the data. One of the foci of Landing AI is to empower manufacturing companies to do the machine learning work themselves. A lot of our work is making sure the software is fast and easy to use. Through the iterative process of machine learning development, we advise customers on things like how to train models on the platform, when and how to improve the labeling of data so the performance of the model improves. Our training and software supports them all the way through deploying the trained model to an edge device in the factory. How do you deal with changing needs? If products change or lighting conditions change in the factory, can the model keep up? Ng: It varies by manufacturer. There is data drift in many contexts. But there are some manufacturers that have been running the same manufacturing line for 20 years now with few changes, so they don’t expect changes in the next five years. Those stable environments make things easier. For other manufacturers, we provide tools to flag when there’s a significant data-drift issue. I find it really important to empower manufacturing customers to correct data, retrain, and update the model. Because if something changes and it’s 3 a.m. in the United States, I want them to be able to adapt their learning algorithm right away to maintain operations. In the consumer software Internet, we could train a handful of machine-learning models to serve a billion users. In manufacturing, you might have 10,000 manufacturers building 10,000 custom AI models. The challenge is, how do you do that without Landing AI having to hire 10,000 machine learning specialists? So you’re saying that to make it scale, you have to empower customers to do a lot of the training and other work. Ng: Yes, exactly! This is an industry-wide problem in AI, not just in manufacturing. Look at health care. Every hospital has its own slightly different format for electronic health records. How can every hospital train its own custom AI model? Expecting every hospital’s IT personnel to invent new neural-network architectures is unrealistic. The only way out of this dilemma is to build tools that empower the customers to build their own models by giving them tools to engineer the data and express their domain knowledge. That’s what Landing AI is executing in computer vision, and the field of AI needs other teams to execute this in other domains. Is there anything else you think it’s important for people to understand about the work you’re doing or the data-centric AI movement? Ng: In the last decade, the biggest shift in AI was a shift to deep learning. I think it’s quite possible that in this decade the biggest shift will be to data-centric AI. With the maturity of today’s neural network architectures, I think for a lot of the practical applications the bottleneck will be whether we can efficiently get the data we need to develop systems that work well. The data-centric AI movement has tremendous energy and momentum across the whole community. I hope more researchers and developers will jump in and work on it. Back to top This article appears in the April 2022 print issue as “Andrew Ng, AI Minimalist.”