Wired
중도 성향
IT/기술
Wave Cash App’s Magic Wand to Pay for Stuff
You can tap the star-shaped, NFC-enabled wand at terminals to make contactless payments. It's the first of several tap-to-pay hardware doodads coming from Cash App.
IT/기술 · "STUFF" · 총 14건
필터 보기현재 지수
50.3
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 87,619건을 분석한 결과, 뉴스 심리지수는 50.2(균형)입니다. 긍정 4,360건(5.0%)·중립 81,113건(92.6%)·부정 2,146건(2.4%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 14.7(중도 균형)입니다.
You can tap the star-shaped, NFC-enabled wand at terminals to make contactless payments. It's the first of several tap-to-pay hardware doodads coming from Cash App.
We’re always testing out new products here The Verge, which presents a bit of a problem for our inventory closet in New York City. It’s literally overflowing with gadgets, new and old, so we’re restoring order by giving some of it away to one lucky person. We’ve stuffed over $800 worth of tech into a […]
Neanderthals had some wild stuff in their toolkits.
A unicorn Beanie Baby. A 15-pound green bowling ball. A pair of dentures. These are just some of the items left behind in robotaxis in the past year, according to Uber's annual Lost and Found Index. For the first time, the company is expanding its annual of accounting of things forgotten in Uber vehicles to […]
Silicon Valley's new message: AI may not be the job apocalypse we said it'd be
Hi, friends! Welcome to Installer No. 130, your guide to the best and Verge-iest stuff in the world. (If you're new here, welcome, don't forget to hydrate, and also you can read all the old editions at the Installer homepage.) This week, I've been reading about Victor Wembanyama and mahjong and Merlin Mann's pearls of […]
Speaking at Amazon’s AI on the Lot event, the Rogue One film-maker Gareth Edwards said ‘it’ll do anything you ask’ and ‘it’s going to be better than CGI’ Jurassic World Rebirth and Rogue One director Gareth Edwards has enthusiastically endorsed the use of generative AI in film-making, saying “it is a fucking genius at helping you” and “it’s going to be better than CGI”. Edwards was speaking at AI on the Lot, an event in Culver City, California, organised by Amazon, and in remarks reported by the Hollywood Reporter said: “I can’t see a reason why you wouldn’t become interested in this stuff as a film-maker. It’s so clearly a tool that might be up there with the camera. It’s going to be better than CGI.” Continue reading...
Getting carbon and sulfur into Earth’s interior may be part of oxygen’s story.
Floppy disks are several decades old—many of the disks are degrading and the data stored on them is at risk of being lost. In response, Leontien Talboom, a technical analyst at Cambridge University Libraries and Archives, led a roughly year-long project preserving floppy disks called “Future Nostalgia,” which concluded in January. Leontien Talboom Leontien Talboom is a technical analyst at Cambridge University Libraries and Archives, where she transfers material from a wide range of storage media to make them accessible to archivists. IEEE Spectrum spoke to Talboom about her work preserving data from Cambridge’s collection of floppy disks and collecting knowledge about the disks themselves. Why is it important to preserve floppy disks now? Leontien Talboom: Two reasons. First, the physical media is starting to degrade. Floppy disks are made from plastic, but they’ve got a magnetic layer of iron oxide, and that’s deteriorating. A lot of floppy disks are found in attics or garages, which means they also suffer from mold. Second, a lot of people who developed floppy disks and systems that use floppy disks are starting to retire or pass away, which means that a lot of tacit knowledge is disappearing. Whom did you go to for that tacit knowledge? Talboom: I went to the retro computing community. Their work is more around preserving these machines to keep them running [than] the data that lives on the floppy disk. But they know their stuff about floppy disks. For example, they know that in a lot of the older disks, the inside of the disk—the doughnut—gets stuck to the top. So if you flex the casing, the doughnut falls down again. If I hadn’t known that, I would have assumed that those disks in our collection were broken or corrupt. What is the most difficult part of working with floppy disks? Talboom: Accessing the files can be quite challenging if we don’t understand the file system. Within libraries and archives, we get a lot of material from machines that are not as well loved. Many of the personal computers that you had at home, such as the Amstrad or ZX Spectrum or BBC Micro, are very well documented. But a bunch of our material comes from business or research systems. They’re not as nostalgic for people, so there’s not as big a community preserving this type of material. Do you have a favorite type of floppy disk? Talboom: Five and a quarter. The weirder the system, the more frustrating and fun it is. I quite like doing that detective work. The Amstrad disk has also really stolen my heart. The popularity of floppy disks is very geographically dependent. Our library, for example, has these Amstrad 3-inch disks. But if you go to the U.S., they’re really uncommon. They weren’t able to manufacture enough of these drives, and [3.5-inch disks] took over at a certain point. But they’re really cute. What’s the best method for sustainably storing data? Talboom: The main thing is actively looking after it. A lot of the floppy disks we get in the library haven’t been accessed for 20 or 30 years, which means that you need certain special hardware to actually read them, and then work with emulators or other tools to make these file formats accessible. Now that we’ve done that work and transferred it, we can monitor it and make sure it’s not suffering from anything like bit rot. We can also make decisions around migrating it to other file formats or working on specific file systems or unknown file formats in more detail.
Hi, friends! Welcome to Installer No. 129, your guide to the best and Verge-iest stuff in the world. (If you're new here, welcome, come on you Gunners, and also you can read all the old editions at the Installer homepage.) This week, I've mostly been sick, which has meant nearly a full rewatch of Parks […]
Last year I deepfaked my kid's stuffed animal to make it look like his plush deer was on vacation. It was an experiment to see if I could re-create the events depicted in a Gemini ad Google was running, and I never showed the videos of Buddy the deer on his adventures to my four-year-old. […]
Need to schlep some stuff? These field-tested duffels can handle your baggage.
Over the next few decades, billions of autonomous, AI-powered robots will work alongside people in factories, perform tedious tasks in warehouses, care for the elderly, assist in unsafe disaster areas, deliver packages and food to our doorsteps, and eventually help out in our homes. Some will look like us, and many won’t. What is certain is that regardless of form factor, robots will all rely heavily on AI in order to deliver real-world value. In 2025, total investments in robotics companies reached a record US $40.7 billion, accounting for 9 percent of all venture funding. The multibillion dollar question therefore is this: What will it take for AI-powered robots to begin to have a serious economic impact? Many of today’s robotics and AI companies are making bold claims, such as that humanoid robots will soon be coming into our homes, but there’s still a big gap between promise and reality. The promise of robots that live and work alongside us has been the stuff of science fiction for a very long time. And while many programmers have tried to make that promise a reality, the physical world is just too complicated for traditional computer programs to handle the endless complexity it presents. Thanks to AI, robots are no longer being programmed—instead, they learn to operate in the real world. With enough practice, they can learn to perceive and understand the world around them, reason about that world, and use that reason and understanding to perform tasks that are useful, reliable, and safe. The two of us have worked at the forefront of AI and robotics for the last decade, as a Professor in Robotics at Oregon State University and Co-Founder of Agility Robotics, and as former CEO of the Everyday Robots moonshot at Google X. Our experience deploying AI-powered robots in real-world settings has given us a perspective on where AI can be used to great benefit in complex robotic systems in the near term and where we are still on the frontier of science fiction. We believe AI will enable an inflection point in robotics advances, but that it will be through the well-engineered application of coordinated systems of different AI tools rather than a single ChatGPT-style breakthrough. As the excitement around AI is matched only by the uncertainty of what will be possible, here are five hard truths that will define AI in robotics. 1. The YouTube-to-Reality Gap Is Real For years, we have been seeing videos on YouTube with humanoid robots performing amazing moves on everything from a dance floor to an obstacle course. The inside knowledge in robotics is to “never trust a YouTube robot video.” The gap between real robots that can perform real work in unstructured human environments and carefully scripted and edited robot performances remains significant. The latest performance to get a lot of attention was a martial arts show featuring Unitree humanoid robots performing with children at the Chinese 2026 Spring Festival Gala. While impressive, this falls into a long lineage of tightly scripted robotic performances, where everything has been carefully choreographed and planned in advance. The low-level controls, synchronization, and choreography were stunning, yet the Spring Gala robot performance showed a level of autonomy and intelligence much closer to industrial robots building cars in a factory than something that will show up in your living room any time soon. Seeing these kinds of demos nevertheless raises questions about where robotics really is. If robots can perform kung fu moves and do backflips and dance, why aren’t they also showing up on factory floors yet? And why can’t they do the dishes in my home after dinner? The simple answer is this: Making AI-powered robots capable of performing general tasks in varied human environments is still really hard. While impressive technological feats like those at the Spring Festival may make it look like we could be very close, the use of AI in these demos is only for low-level motor control (to keep the robots from falling over) and therefore is only a small part of the solution for robots to be general purpose in the real, unstructured spaces where we humans live and work. 2. Data Is An Unsolved Challenge Large Language Models (LLMs) like OpenAI’s ChatGPT and Anthropic’s Claude were initially trained on an internet-scale database of text. The world woke up one day in late 2022 to ChatGPT demonstrating that AI computers could suddenly “speak” to us in prose or verse and about seemingly any topic. LLMs have turned out to generalize well and are now able to take multimodal input (text, images, video) and produce multimodal output. Importantly, the corpus of training data was both enormous and human-generated, which are characteristics that form the gold standard for AI training. The fastest path to robots as part of everyday life may emerge through a range of robot forms performing increasingly sophisticated applications and employing a range of AI tools.Agility Robotics Giving AI a body (in the form of a robot), so that it can engage with people in the physical world, continues to be a very difficult and broadly unsolved problem. AI models for general-purpose robotics must simultaneously satisfy multiple, often conflicting, physical, geometric, and temporal limitations while operating in unstructured, dynamic environments. In order to generalize, robot models need to be trained on data gathered in a high-dimensional configuration space, where “dimensions” represent text, lighting conditions, degrees of freedom, joint limits, velocities, force, and safety boundaries, just to mention a few. Importantly, this must be good data—it must contain many examples from what amounts to an infinite number of possible configurations in the physical world. Since there are very few existing sources of data like this, approaches like teleoperation, video analysis, motion capture of humans, and self-exploration in simulation and in the real world are all seen as important ways to collect data. It’s a herculean task. For example, at Everyday Robots at Google X, we ran 240 million robot instances in our simulator over the course of 2022 to collect training data, mostly to train a trash-sorting model. Similar amounts of data will be needed for every skill to get to a similar level of capability, which is not yet human level. 3. There Will Be No Single Robot AI We are far away from a moment where a single AI model might allow general-purpose robots to live and work alongside us. General-purpose robots can have wheels or legs. They can have one, two, three, or more arms. Some have propellers and can fly, while others may be designed to operate under water. Some will drive on busy roads. The physical world is infinitely varied and complex. And then there are all the people and other animals that will be surrounding the robots. How do you train a model to operate a robot safely and reliably in all of these settings? The simple answer is: You don’t. At least not for quite some time. We believe the winning AI architecture leading to the next big breakthroughs in general-purpose robotics will be “agentic AI” for robots, which are high-level coordinating models that can reason, plan, use tools, and learn from outcomes to execute complex tasks with limited supervision. Agentic, high-level models running on robots will invoke a system of specialized ones for different types of tasks. We will likely soon see multiple robots collaborating and coordinating with each other through their onboard agentic AI models. AI tools are unlocking new and powerful capabilities in robotics, which in turn will enable new solutions and new markets. It’s encouraging to see these new models being made broadly available, some even as open-source solutions. This availability is akin to what happened with the internet: Real progress occurred when it became ubiquitous. We anticipate an inevitable democratization of complex behaviors in robotics with wide access to these AI tools and technologies. 4. Hardware Is Still Very Hard Robots are complex systems with many parts that all need to work together with great precision. For a robot to be useful and safe, every part of it must be coordinated, from its perception systems to the computer controlling it, all the way down to its individual actuators. Actuators—that is, the motors and gears—are a good example of an important part of the robot where what got us here won’t get us there. The actuators used at scale by most industrial robots will not work for robots that will operate in human environments. If these robots accidentally collide with an obstacle, the resulting impacts are harsh, forces are high, and things break. Humans don’t move in this way. We are far more compliant in how we interact with the world, and we’re constantly making contact with our environment and using that contact to help us accomplish things. Consider the challenge of inserting a key in a lock: Humans typically don’t do this by aligning the key perfectly with the keyhole. Instead, we just feel for the edge of the keyhole and jiggle the key in. Robots need to be able to operate in novel ways to achieve comparable capabilities by using a new class of actuators that are sensitive to force and able to have a compliant interaction with the environment. While these kinds of actuators do exist, they are not yet generally available at scale for robot systems designed to operate around people. 5. Real Value Comes From “Easy” Tasks There’s a big difference between tasks that look impressive and real-world tasks that provide value. Robotics is a perfect example of Moravec’s paradox, which states that tasks that are hard for humans are easy for computers (like multiplying two big numbers), and tasks easy for humans (like a toddler’s movements) are extremely difficult for computers and robots. Serving customers is an unforgiving reality check, because customers only care about solving the real problems they have. If we are to deploy AI-based robot solutions, they must outperform the way things are currently done while demonstrating reliable performance metrics and safety. Agility Robotics’ early work to deploy our humanoid robot Digit in customer locations led to the realization that our first obstacle was safety: Robots that balance and manipulate objects in human spaces bring new types of risk to the workplace. In the first humanoid deployments, physical barriers were necessary, and Agility kicked off a multi-year engineering effort to solve the safety challenge, touching nearly every aspect of robot design and relying heavily on new AI-based approaches to human detection and behavior control. Everyday Robots at Google deployed robots in 2019 that worked autonomously in office buildings doing chores like cleaning cafe tables and sorting trash. We quickly learned how “messy” and difficult the real world is for a robot. This experience informed the architecture and deployment of our AI systems while also gathering real-world data that could be combined with simulation data for training and improving models. This focus on creating a product to meet specific customer needs and deploying robots in real-world settings is the only way to inform the structure of the AI tools and infrastructure for near-term utility on a path towards long-term broader capability and generality. There will be no “aha” moment, no silver bullet algorithm, and no volume of data sufficient to produce a general-purpose robot without extensive real-world experience. AI Robots Are Coming, One Step at a Time As we look to the future, there is no doubt that the world is bringing AI into the physical world through robots. We are at the beginning of a “Cambrian explosion“ of useful, intelligent machines. We believe AI is not one tool, but a huge frontier of technical approaches that is unlocking new capabilities so powerful, they will define our economy moving forward. This will happen not in one single definitive moment, but as an ongoing set of small and large breakthroughs, where AI-driven robots begin to provide real value in a few tasks, and then a few more, with impacts unfolding across numerous $100 billion-plus markets that will dramatically improve the quality of our lives.
When it comes to AI models, size matters. Even though some artificial-intelligence experts warn that scaling up large language models (LLMs) is hitting diminishing performance returns, companies are still coming out with ever larger AI tools. Meta’s latest Llama release had a staggering 2 trillion parameters that define the model. As models grow in size, their capabilities increase. But so do the energy demands and the time it takes to run the models, which increases their carbon footprint. To mitigate these issues, people have turned to smaller, less capable models and using lower-precision numbers whenever possible for the model parameters. But there is another path that may retain a staggeringly large model’s high performance while reducing the time it takes to run an energy footprint. This approach involves befriending the zeros inside large AI models. For many models, most of the parameters—the weights and activations—are actually zero, or so close to zero that they could be treated as such without losing accuracy. This quality is known as sparsity. Sparsity offers a significant opportunity for computational savings: Instead of wasting time and energy adding or multiplying zeros, these calculations could simply be skipped; rather than storing lots of zeros in memory, one need only store the nonzero parameters. Unfortunately, today’s popular hardware, like multicore CPUs and GPUs, do not naturally take full advantage of sparsity. To fully leverage sparsity, researchers and engineers need to rethink and re-architect each piece of the design stack, including the hardware, low-level firmware, and application software. In our research group at Stanford University, we have developed the first (to our knowledge) piece of hardware that’s capable of calculating all kinds of sparse and traditional workloads efficiently. The energy savings varied widely over the workloads, but on average our chip consumed one-seventieth the energy of a CPU, and performed the computation on average eight times as fast. To do this, we had to engineer the hardware, low-level firmware, and software from the ground up to take advantage of sparsity. We hope this is just the beginning of hardware and model development that will allow for more energy-efficient AI. What is sparsity? Neural networks, and the data that feeds into them, are represented as arrays of numbers. These arrays can be one-dimensional (vectors), two-dimensional (matrices), or more (tensors). A sparse vector, matrix, or tensor has mostly zero elements. The level of sparsity varies, but when zeroes make up more than 50 percent of any type of array, it can stand to benefit from sparsity-specific computational methods. In contrast, an object that is not sparse—that is, it has few zeros compared with the total number of elements—is called dense. Sparsity can be naturally present, or it can be induced. For example, a social-network graph will be naturally sparse. Imagine a graph where each node (point) represents a person, and each edge (a line segment connecting the points) represents a friendship. Since most people are not friends with one another, a matrix representing all possible edges will be mostly zeros. Other popular applications of AI, such as other forms of graph learning and recommendation models, contain naturally occurring sparsity as well. Beyond naturally occurring sparsity, sparsity can also be induced within an AI model in several ways. Two years ago, a team at Cerebras showed that one can set up to 70 to 80 percent of parameters in an LLM to zero without losing any accuracy. Cerebras demonstrated these results specifically on Meta’s open-source Llama 7B model, but the ideas extend to other LLM models like ChatGPT and Claude. The case for sparsity Sparse computation’s efficiency stems from two fundamental properties: the ability to compress away zeros and the convenient mathematical properties of zeros. Both the algorithms used in sparse computation and the hardware dedicated to them leverage these two basic ideas. First, sparse data can be compressed, making it more memory efficient to store “sparsely”—that is, in something called a sparse data type. Compression also makes it more energy efficient to move data when dealing with large amounts of it. This is best understood by an example. Take a four-by-four matrix with three nonzero elements. Traditionally, this matrix would be stored in memory as is, taking up 16 spaces. This matrix can also be compressed into a sparse data type, getting rid of the zeros and saving only the nonzero elements. In our example, this results in 13 memory spaces as opposed to 16 for the dense, uncompressed version. These savings in memory increase with increased sparsity and matrix size. In addition to the actual data values, compressed data also requires metadata. The row and column locations of the nonzero elements also must be stored. This is usually thought of as a “fibertree”: The row labels containing nonzero elements are listed and linked to the column labels of the nonzero elements, which are then linked to the values stored in those elements. In memory, things get a bit more complicated still: The row and column labels for each nonzero value must be stored as well as the “segments” that indicate how many such labels to expect, so the metadata and data can be clearly delineated from one another. In a dense, noncompressed matrix data type, values can be accessed either one at a time or in parallel, and their locations can be calculated directly with a simple equation. However, accessing values in sparse, compressed data requires looking up the coordinates of the row index and using that information to “indirectly” look up the coordinates of the column index before finally reaching the value. Depending on the actual locations of the sparse data values, these indirect lookups can be extremely random, making the computation data-dependent and requiring the allocation of memory lookups on the fly. Second, two mathematical properties of zero let software and hardware skip a lot of computation. Multiplying any number by zero will result in a zero, so there’s no need to actually do the multiplication. Adding zero to any number will always return that number, so there’s no need to do the addition either. In matrix-vector multiplication, one of the most common operations in AI workloads, all computations except those involving two nonzero elements can simply be skipped. Take, for example, the four-by-four matrix from the previous example and a vector of four numbers. In dense computation, each element of the vector must be multiplied by the corresponding element in each row and then added together to compute the final vector. In this case, that would take 16 multiplication operations and 16 additions (or four accumulations). In sparse computation, only the nonzero elements of the vector need be considered. For each nonzero vector element, indirect lookup can be used to find any corresponding nonzero matrix element, and only those need to be multiplied and added. In the example shown here, only two multiplication steps will be performed, instead of 16. The trouble with GPUs and CPUs Unfortunately, modern hardware is not well suited to accelerating sparse computation. For example, say we want to perform a matrix-vector multiplication. In the simplest case, in a single CPU core, each element in the vector would be multiplied sequentially and then written to memory. This is slow, because we can do only one multiplication at a time. So instead people use CPUs with vector support or GPUs. With this hardware, all elements would be multiplied in parallel, greatly speeding up the application. Now, imagine that both the matrix and vector contain extremely sparse data. The vectorized CPU and GPU would spend most of their efforts multiplying by zero, performing completely ineffectual computations. Newer generations of GPUs are capable of taking some advantage of sparsity in their hardware, but only a particular kind, called structured sparsity. Structured sparsity assumes that two out of every four adjacent parameters are zero. However, some models benefit more from unstructured sparsity—the ability for any parameter (weight or activation) to be zero and compressed away, regardless of where it is and what it is adjacent to. GPUs can run unstructured sparse computation in software, for example, through the use of the cuSparse GPU library. However, the support for sparse computations is often limited, and the GPU hardware gets underutilized, wasting energy-intensive computations on overhead. Petra Péterffy When doing sparse computations in software, modern CPUs may be a better alternative to GPU computation, because they are designed to be more flexible. Yet, sparse computations on the CPU are often bottlenecked by the indirect lookups used to find nonzero data. CPUs are designed to “prefetch” data based on what they expect they’ll need from memory, but for randomly sparse data, that process often fails to pull in the right stuff from memory. When that happens, the CPU must waste cycles calling for the right data. Apple was the first to speed up these indirect lookups by supporting a method called an array-of-pointers access pattern in the prefetcher of their A14 and M1 chips. Although innovations in prefetching make Apple CPUs more competitive for sparse computation, CPU architectures still have fundamental overheads that a dedicated sparse computing architecture would not, because they need to handle general-purpose computation. Other companies have been developing hardware that accelerates sparse machine learning as well. These include Cerebras’s Wafer Scale Engine and Meta’s Training and Inference Accelerator (MTIA). The Wafer Scale Engine, and its corresponding sparse programming framework, have shown incredibly sparse results of up to 70 percent sparsity on LLMs. However, the company’s hardware and software solutions support only weight sparsity, not activation sparsity, which is important for many applications. The second version of the MTIA claims a sevenfold sparse compute performance boost over the MTIA v1. However, the only publicly available information regarding sparsity support in the MTIA v2 is for matrix multiplication, not for vectors or tensors. Although matrix multiplications take up the majority of computation time in most modern ML models, it’s important to have sparsity support for other parts of the process. To avoid switching back and forth between sparse and dense data types, all of the operations should be sparse. Onyx Instead of these halfway solutions, our team at Stanford has developed a hardware accelerator, Onyx, that can take advantage of sparsity from the ground up, whether it’s structured or unstructured. Onyx is the first programmable accelerator to support both sparse and dense computation; it’s capable of accelerating key operations in both domains. To understand Onyx, it is useful to know what a coarse-grained reconfigurable array (CGRA) is and how it compares with more familiar hardware, like CPUs and field-programmable gate arrays (FPGAs). CPUs, CGRAs, and FPGAs represent a trade-off between efficiency and flexibility. Each individual logic unit of a CPU is designed for a specific function that it performs efficiently. On the other hand, since each individual bit of an FPGA is configurable, these arrays are extremely flexible, but very inefficient. The goal of CGRAs is to achieve the flexibility of FPGAs with the efficiency of CPUs. CGRAs are composed of efficient and configurable units, typically memory and compute, that are specialized for a particular application domain. This is the key benefit of this type of array: Programmers can reconfigure the internals of a CGRA at a high level, making it more efficient than an FPGA but more flexible than a CPU. The Onyx chip, built on a coarse-grained reconfigurable array (CGRA), is the first (to our knowledge) to support both sparse and dense computations. Olivia Hsu Onyx is composed of flexible, programmable processing element (PE) tiles and memory (MEM) tiles. The memory tiles store compressed matrices and other data formats. The processing element tiles operate on compressed matrices, eliminating all unnecessary and ineffectual computation. The Onyx compiler handles conversion from software instructions to CGRA configuration. First, the input expression—for instance, a sparse vector multiplication—is translated into a graph of abstract memory and compute nodes. In this example, there are memories for the input vectors and output vectors, a compute node for finding the intersection between nonzero elements, and a compute node for the multiplication. The compiler figures out how to map the abstract memory and compute nodes onto MEMs and PEs on the CGRA, and then how to route them together so that they can transfer data between them. Finally, the compiler produces the instruction set needed to configure the CGRA for the desired purpose. Since Onyx is programmable, engineers can map many different operations, such as vector-vector element multiplication, or the key tasks in AI, like matrix-vector or matrix-matrix multiplication, onto the accelerator. We evaluated the efficiency gains of our hardware by looking at the product of energy used and the time it took to compute, called the energy-delay product (EDP). This metric captures the trade-off of speed and energy. Minimizing just energy would lead to very slow devices, and minimizing speed would lead to high-area, high-power devices. Onyx achieves up to 565 times as much energy-delay product over CPUs (we used a 12-core Intel Xeon CPU) that utilize dedicated sparse libraries. Onyx can also be configured to accelerate regular, dense applications, similar to the way a GPU or TPU would. If the computation is sparse, Onyx is configured to use sparse primitives, and if the computation is dense, Onyx is reconfigured to take advantage of parallelism, similar to how GPUs function. This architecture is a step toward a single system that can accelerate both sparse and dense computations on the same silicon. Just as important, Onyx enables new algorithmic thinking. Sparse acceleration hardware will not only make AI more performance- and energy efficient but also enable researchers and engineers to explore new algorithms that have the potential to dramatically improve AI. The future with sparsity Our team is already working on next-generation chips built off of Onyx. Beyond matrix multiplication operations, machine learning models perform other types of math, like nonlinear layers, normalization, the softmax function, and more. We are adding support for the full range of computations on our next-gen accelerator and within the compiler. Since sparse machine learning models may have both sparse and dense layers, we are also working on integrating the dense and sparse accelerator architecture more efficiently on the chip, allowing for fast transformation between the different data types. We’re also looking at ways to manage memory constraints by breaking up the sparse data more effectively so we can run computations on several sparse accelerator chips. We are also working on systems that can predict the performance of accelerators such as ours, which will help in designing better hardware for sparse AI. Longer term, we’re interested in seeing whether high degrees of sparsity throughout AI computation will catch on with more model types, and whether sparse accelerators become adopted at a larger scale. Building the hardware to unstructured sparsity and optimally take advantage of zeros is just the beginning. With this hardware in hand, AI researchers and engineers will have the opportunity to explore new models and algorithms that leverage sparsity in novel and creative ways. We see this as a crucial research area for managing the ever-increasing runtime, costs, and environmental impact of AI.