Hindustan Times
중도 성향
IT/기술
No relaxation in 75% class 12 marks rule for IIT admissions, says Joint Admission Board
The demands were made in the wake of growing concerns among students over the delay in re-evaluation process of CBSE exams.
IT/기술 · "JOINT" · 총 15건
필터 보기현재 지수
50.3
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 83,765건을 분석한 결과, 뉴스 심리지수는 50.2(균형)입니다. 긍정 4,208건(5.0%)·중립 77,482건(92.5%)·부정 2,075건(2.5%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 14.7(중도 균형)입니다.
The demands were made in the wake of growing concerns among students over the delay in re-evaluation process of CBSE exams.
JAB says IIT admissions through JEE Advanced 2026 will continue to require 75% Class 12 marks despite demands for relaxation over CBSE delays.
Fianna Fáil TD Malcolm Byrne has said that he is stepping down as Chair of the Joint Oireachtas Committee on Artificial Intelligence.
TAIPEI, June 4 — Foxconn said today it will work with US chipmaker Intel to jointly develop and deploy next-...
더벨'머니투데이 thebell'에 출고된 기사입니다. 마음AI가 미국 샌디에이고에서 개최된 제18회 국제기뢰전기술심포지엄(IMTWS 2026)에서 차세대 인공지능 기반 기뢰 탐지 기술인 'Mine-JEPA(Mine Joint Embedding Predictive Architecture)'를 발표했다고 밝혔다. IMTWS는 미국 해군을 비롯해 NATO 회원국 해군, 국방 연구기관, 방산기업, 학계 전문가들이 참가하는 세계 최고 권위의 기뢰전 전문 국제 심포지엄이다. 주로 최신 기뢰 탐지·식별 기술과 무인체계 기반 기뢰대항전 기술이 논의된다....
NC AI said Sunday it signed a strategic business agreement with Posco DX on the joint development of a robot foundation model and for broader technical cooperation. The signing ceremony was attended by Kim Min-jae, chief technology officer at NC AI, and Yoon Suk-june, head of the robot automation center of Posco DX, along with senior officials from both companies. The two sides discussed long-term cooperation plans to enhance competitiveness in robot intelligence technologies and industrial AI.
Today, I’m talking with Wassym Bensaid, the chief software officer at Rivian, and the co-CEO of Rivian’s platform joint venture with Volkswagen, which everyone just calls RV Tech. That joint venture kicked off about a year and a half ago with a nearly $6 billion investment from Volkswagen. It effectively puts Wassym in charge of […]
With victory in the global race to build artificial intelligence capacity heavily dependent on resilient power systems, China is urging domestic enterprises to launch pilot projects that integrate the cutting-edge technology into the energy sector. To support the plan, Beijing has released an official list of application scenarios ranging from smart grids to autonomous coal mines. Energy enterprises would be able to partner with artificial intelligence providers and jointly submit proposals for...
The OnCampus program, administered by IEEE Educational Activities, last year expanded its engineering experiences from two to seven universities. Part of TryEngineering, the program is held at universities around the world, offering preuniversity students hands-on opportunities to solve engineering problems. The IEEE Innovation Committee provided funding for the additional locations. New participating institutions The electrical engineering and computing faculty at the University of Zagreb, in Croatia, hosted a two-day program in June. Twenty-five children ages 10 to 14 participated in lectures and workshops on artificial intelligence, computer science, robotics, and astronomy. Tomislav Jagušt, an IEEE senior member and the chair of the IEEE preuniversity coordinating committee, led the program. In September the Arab Academy for Science, Technology, and Maritime Transport’s engineering college held a two-day session at its Abu Kir, Egypt, campus. Fifty students participated in hands-on activities on Ohm’s law, radio communications, and circuit building. They also learned from professors about engineering careers and job opportunities. Also in September, the Majan University College, in Muscat, Oman, hosted 40 high school students who competed in six challenges to design and build circuits. These include an IoT design and an LED brightness control using a potentiometer, a three-terminal, manually adjustable resistor that functions as a variable voltage divider. The program also highlighted AI and quantum computing technologies and introduced students to job opportunities in the fields. The workshop transformed curiosity into creation, empowering students with technical skills and confidence in emerging technologies. In November at the Universiti Malaysia Perlis, in Arau, 50 students explored the fundamentals of quantum computational intelligence and AI through hands-on activities and interactive simulations. IEEE Senior Member Mohd Hafiz Ismail, a professor of electronic engineering and technology, gave an introduction about quantum computing intelligence technology. The Hellenic Robotics Center of Excellence at the National Technical University of Athens hosted a two-day session in December. Twenty-five students explored robotics and AI through hands-on design challenges such as TryEngineering’s AI and machine learning methods. They also toured the university’s research facilities. Hong Kong and Greek universities participate again The City University and St. Francis University in Hong Kong, and the University of Ioannina, Arta campus, Greece, participated in the program for a second year. Under the leadership of IEEE Senior Member Paulina Chan and volunteers from the IEEE Hong Kong Section, the City and St. Francis universities jointly held the program in July. They welcomed 55 students ages 12 to 18 from 41 schools. The students attended tutorials on foundational concepts and theories of AI. They worked in small teams on projects using AI-generated images, voice, and music manipulations. They were coached by students from St. Francis and Imperial College London. The participants presented their projects to judges, teachers, and parents. The students also visited a nearby semiconductor equipment manufacturer to learn about technology careers from engineers working there. The results of a post-program survey showed strong satisfaction with OnCampus, with nearly 75 percent of participants giving it a rating of 4 or higher out of 5. “I enjoyed getting to know about deep learning and its application,” one student participant said. “The content of the activity matched my interest, and I gained new knowledge.” “OnCampus is led by a strong team with lots of experts in the field,” another said. “It’s a rare chance for students to use software, learn about the theory behind how deep learning works, and get a glance at future possibilities.” The University of Ioannina hosted the program in Arta in July with support from IEEE Senior Member Stamatis Dragoumanos and IEEE members Nikos Giannakeas and Eleftheria Kallinikou. Nearly 50 students, ages 12 to 16, attended the seven-day event, supported by 17 instructors and six volunteers from the university’s IEEE student branch. The students learned about AI, augmented reality, microchip design, microcontrollers, and 3D printing. They also attended presentations by engineers from the industry. To give the students exposure to real-world engineering, they visited two hydroelectric power plants and a green data center. At the end of the program, students presented their projects and showcased the technical skills they had developed. Those involved in the TryEngineering OnCampus program are proud of the impactful experiences students have gained. The opportunities are possible because universities open their doors, share their expertise, and invest in the next generation of innovators. The University of Zagreb, the Arab Academy for Science, Technology, and Maritime Transport, the Majan University College, and The City University and St. Francis University will be participating again this year. To learn how you can bring the OnCampus program to your educational institution, send a request to tryengineering@ieee.org.
[RFI] Nairobi - The recent Africa Forward summit in Nairobi hosted jointly by Kenya and France gave women working in the technology sector the chance to discuss issues including the future of artificial intelligence in Africa. RFI spoke to Shikoh Gitau, CEO of tech lab Qhala, about working with France's Mistral AI, and with female leaders in the sector.
Over the next few decades, billions of autonomous, AI-powered robots will work alongside people in factories, perform tedious tasks in warehouses, care for the elderly, assist in unsafe disaster areas, deliver packages and food to our doorsteps, and eventually help out in our homes. Some will look like us, and many won’t. What is certain is that regardless of form factor, robots will all rely heavily on AI in order to deliver real-world value. In 2025, total investments in robotics companies reached a record US $40.7 billion, accounting for 9 percent of all venture funding. The multibillion dollar question therefore is this: What will it take for AI-powered robots to begin to have a serious economic impact? Many of today’s robotics and AI companies are making bold claims, such as that humanoid robots will soon be coming into our homes, but there’s still a big gap between promise and reality. The promise of robots that live and work alongside us has been the stuff of science fiction for a very long time. And while many programmers have tried to make that promise a reality, the physical world is just too complicated for traditional computer programs to handle the endless complexity it presents. Thanks to AI, robots are no longer being programmed—instead, they learn to operate in the real world. With enough practice, they can learn to perceive and understand the world around them, reason about that world, and use that reason and understanding to perform tasks that are useful, reliable, and safe. The two of us have worked at the forefront of AI and robotics for the last decade, as a Professor in Robotics at Oregon State University and Co-Founder of Agility Robotics, and as former CEO of the Everyday Robots moonshot at Google X. Our experience deploying AI-powered robots in real-world settings has given us a perspective on where AI can be used to great benefit in complex robotic systems in the near term and where we are still on the frontier of science fiction. We believe AI will enable an inflection point in robotics advances, but that it will be through the well-engineered application of coordinated systems of different AI tools rather than a single ChatGPT-style breakthrough. As the excitement around AI is matched only by the uncertainty of what will be possible, here are five hard truths that will define AI in robotics. 1. The YouTube-to-Reality Gap Is Real For years, we have been seeing videos on YouTube with humanoid robots performing amazing moves on everything from a dance floor to an obstacle course. The inside knowledge in robotics is to “never trust a YouTube robot video.” The gap between real robots that can perform real work in unstructured human environments and carefully scripted and edited robot performances remains significant. The latest performance to get a lot of attention was a martial arts show featuring Unitree humanoid robots performing with children at the Chinese 2026 Spring Festival Gala. While impressive, this falls into a long lineage of tightly scripted robotic performances, where everything has been carefully choreographed and planned in advance. The low-level controls, synchronization, and choreography were stunning, yet the Spring Gala robot performance showed a level of autonomy and intelligence much closer to industrial robots building cars in a factory than something that will show up in your living room any time soon. Seeing these kinds of demos nevertheless raises questions about where robotics really is. If robots can perform kung fu moves and do backflips and dance, why aren’t they also showing up on factory floors yet? And why can’t they do the dishes in my home after dinner? The simple answer is this: Making AI-powered robots capable of performing general tasks in varied human environments is still really hard. While impressive technological feats like those at the Spring Festival may make it look like we could be very close, the use of AI in these demos is only for low-level motor control (to keep the robots from falling over) and therefore is only a small part of the solution for robots to be general purpose in the real, unstructured spaces where we humans live and work. 2. Data Is An Unsolved Challenge Large Language Models (LLMs) like OpenAI’s ChatGPT and Anthropic’s Claude were initially trained on an internet-scale database of text. The world woke up one day in late 2022 to ChatGPT demonstrating that AI computers could suddenly “speak” to us in prose or verse and about seemingly any topic. LLMs have turned out to generalize well and are now able to take multimodal input (text, images, video) and produce multimodal output. Importantly, the corpus of training data was both enormous and human-generated, which are characteristics that form the gold standard for AI training. The fastest path to robots as part of everyday life may emerge through a range of robot forms performing increasingly sophisticated applications and employing a range of AI tools.Agility Robotics Giving AI a body (in the form of a robot), so that it can engage with people in the physical world, continues to be a very difficult and broadly unsolved problem. AI models for general-purpose robotics must simultaneously satisfy multiple, often conflicting, physical, geometric, and temporal limitations while operating in unstructured, dynamic environments. In order to generalize, robot models need to be trained on data gathered in a high-dimensional configuration space, where “dimensions” represent text, lighting conditions, degrees of freedom, joint limits, velocities, force, and safety boundaries, just to mention a few. Importantly, this must be good data—it must contain many examples from what amounts to an infinite number of possible configurations in the physical world. Since there are very few existing sources of data like this, approaches like teleoperation, video analysis, motion capture of humans, and self-exploration in simulation and in the real world are all seen as important ways to collect data. It’s a herculean task. For example, at Everyday Robots at Google X, we ran 240 million robot instances in our simulator over the course of 2022 to collect training data, mostly to train a trash-sorting model. Similar amounts of data will be needed for every skill to get to a similar level of capability, which is not yet human level. 3. There Will Be No Single Robot AI We are far away from a moment where a single AI model might allow general-purpose robots to live and work alongside us. General-purpose robots can have wheels or legs. They can have one, two, three, or more arms. Some have propellers and can fly, while others may be designed to operate under water. Some will drive on busy roads. The physical world is infinitely varied and complex. And then there are all the people and other animals that will be surrounding the robots. How do you train a model to operate a robot safely and reliably in all of these settings? The simple answer is: You don’t. At least not for quite some time. We believe the winning AI architecture leading to the next big breakthroughs in general-purpose robotics will be “agentic AI” for robots, which are high-level coordinating models that can reason, plan, use tools, and learn from outcomes to execute complex tasks with limited supervision. Agentic, high-level models running on robots will invoke a system of specialized ones for different types of tasks. We will likely soon see multiple robots collaborating and coordinating with each other through their onboard agentic AI models. AI tools are unlocking new and powerful capabilities in robotics, which in turn will enable new solutions and new markets. It’s encouraging to see these new models being made broadly available, some even as open-source solutions. This availability is akin to what happened with the internet: Real progress occurred when it became ubiquitous. We anticipate an inevitable democratization of complex behaviors in robotics with wide access to these AI tools and technologies. 4. Hardware Is Still Very Hard Robots are complex systems with many parts that all need to work together with great precision. For a robot to be useful and safe, every part of it must be coordinated, from its perception systems to the computer controlling it, all the way down to its individual actuators. Actuators—that is, the motors and gears—are a good example of an important part of the robot where what got us here won’t get us there. The actuators used at scale by most industrial robots will not work for robots that will operate in human environments. If these robots accidentally collide with an obstacle, the resulting impacts are harsh, forces are high, and things break. Humans don’t move in this way. We are far more compliant in how we interact with the world, and we’re constantly making contact with our environment and using that contact to help us accomplish things. Consider the challenge of inserting a key in a lock: Humans typically don’t do this by aligning the key perfectly with the keyhole. Instead, we just feel for the edge of the keyhole and jiggle the key in. Robots need to be able to operate in novel ways to achieve comparable capabilities by using a new class of actuators that are sensitive to force and able to have a compliant interaction with the environment. While these kinds of actuators do exist, they are not yet generally available at scale for robot systems designed to operate around people. 5. Real Value Comes From “Easy” Tasks There’s a big difference between tasks that look impressive and real-world tasks that provide value. Robotics is a perfect example of Moravec’s paradox, which states that tasks that are hard for humans are easy for computers (like multiplying two big numbers), and tasks easy for humans (like a toddler’s movements) are extremely difficult for computers and robots. Serving customers is an unforgiving reality check, because customers only care about solving the real problems they have. If we are to deploy AI-based robot solutions, they must outperform the way things are currently done while demonstrating reliable performance metrics and safety. Agility Robotics’ early work to deploy our humanoid robot Digit in customer locations led to the realization that our first obstacle was safety: Robots that balance and manipulate objects in human spaces bring new types of risk to the workplace. In the first humanoid deployments, physical barriers were necessary, and Agility kicked off a multi-year engineering effort to solve the safety challenge, touching nearly every aspect of robot design and relying heavily on new AI-based approaches to human detection and behavior control. Everyday Robots at Google deployed robots in 2019 that worked autonomously in office buildings doing chores like cleaning cafe tables and sorting trash. We quickly learned how “messy” and difficult the real world is for a robot. This experience informed the architecture and deployment of our AI systems while also gathering real-world data that could be combined with simulation data for training and improving models. This focus on creating a product to meet specific customer needs and deploying robots in real-world settings is the only way to inform the structure of the AI tools and infrastructure for near-term utility on a path towards long-term broader capability and generality. There will be no “aha” moment, no silver bullet algorithm, and no volume of data sufficient to produce a general-purpose robot without extensive real-world experience. AI Robots Are Coming, One Step at a Time As we look to the future, there is no doubt that the world is bringing AI into the physical world through robots. We are at the beginning of a “Cambrian explosion“ of useful, intelligent machines. We believe AI is not one tool, but a huge frontier of technical approaches that is unlocking new capabilities so powerful, they will define our economy moving forward. This will happen not in one single definitive moment, but as an ongoing set of small and large breakthroughs, where AI-driven robots begin to provide real value in a few tasks, and then a few more, with impacts unfolding across numerous $100 billion-plus markets that will dramatically improve the quality of our lives.
The government and OpenAI will collaborate on “OpenAI for Singapore”, a joint initiative to strengthen the country’s position as a leading hub for applied, AI-native innovation.
Statement from the Bank of England, Financial Conduct Authority and HM Treasury
A guide to ten technological components — from THz communications and AI/ML to reconfigurable intelligent surfaces — poised to define 6G wireless networks. What Attendees will Learn Which frequencies 6G will use — Understand why THz bands (above 100 GHz) and the7–24 GHz range are under consideration, what challenges CMOS technology faces at sub-THz frequencies, and how new semiconductor approaches aim to close the output-power gap for future link budgets. How AI/ML and joint communications and sensing reshape the air interface — how auto encoder-based end-to-end learning can replace traditional signal-processing blocks, and how a single waveform may serve both data transmission and radar-like environmental sensing. What reconfigurable intelligent surfaces and photonics bring to the radio environment— Explore how programmable metamaterial panels can steer and shape electromagnetic waves, and how visible light communications and all-photonics networks extend capacity and lower latency. How ultra-massive MIMO, full-duplex, and new network topologies enable a true 3D“network of networks” — Understand how antenna arrays with vastly more elements, simultaneously transmit/receive on the same frequency, and non-terrestrial nodes converge to deliver ubiquitous, high-capacity 6G coverage. Download this free whitepaper now!
This article is brought to you by DAIMON Robotics. This April, Hong Kong-based DAIMON Robotics has released Daimon-Infinity, which it describes as the largest omni-modal robotic dataset for physical AI, featuring high resolution tactile sensing and spanning a wide range of tasks from folding laundry at home to manufacturing on factory assembly lines. The project is supported by collaborative efforts of partners across China and the globe, including Google DeepMind, Northwestern University, and the National University of Singapore. The move signals a key strategic initiative for DAIMON, a two-and-a-half-year-old company known for its advanced tactile sensor hardware, most notably a monochromatic, vision-based tactile sensor that packs over 110,000 effective sensing units into a fingertip-sized module. Drawing on its high-resolution tactile sensing technology and a distributed out-of-lab collection network capable of generating millions of hours of data annually, DAIMON is building large-scale robot manipulation datasets that include vast amounts of tactile sensing data. To accelerate the real-world deployment of embodied AI, the company has also open-sourced 10,000 hours of its data. Prof. Michael Yu Wang, co-founder and chief scientist at DAIMON Robotics, has pioneered Vision-Tactile-Language-Action (VTLA) architecture, elevating the tactile to a modality on par with vision.DAIMON Robotics Behind the strategy is Prof. Michael Yu Wang, DAIMON’s co-founder and chief scientist. Prof. Wang earned his PhD at Carnegie Mellon — studying manipulation under Matt Mason — and went on to found the Robotics Institute at the Hong Kong University of Science and Technology. An IEEE Fellow and former Editor-in-Chief of IEEE Transactions on Automation Science and Engineering, he has spent roughly four decades in the field. His objective is to address the missing “insensitivity” of robot manipulation, which practically relies on the dominant Vision-Language-Action (VLA) model. He and his team have pioneered Vision-Tactile-Language-Action (VTLA) architecture, elevating the tactile to a modality on par with vision. We spoke with Prof. Wang about how tactile feedback aims to change dexterous manipulation, how the dataset initiative is foreseen to improve our understanding of robotic hands in natural environments, and where — from hotels to convenience stores in China — he sees touch-enabled robots making their first real-world inroads. Daimon-Infinity is the world’s largest omni-modal dataset for Physical AI, featuring million-hour scale multimodal data, ultra-high-res tactile feedback, data from 80+ real scenarios and 2,000+ human skills, and more.DAIMON Robotics The Dataset Initiative This month, DAIMON Robotics released the largest and most comprehensive robotic manipulation dataset with multiple leading academic institutions and enterprises. Why releasing the dataset now, rather than continuing to focus on product development? What impact will this have on the embodied intelligence industry? DAIMON Robotics has been around for almost two and a half years. We have been committed to developing high-resolution, multimodal tactile sensing devices to perceive the interaction between a robot’s hand (particularly its fingertips) and objects. Our devices have become quite robust. They are now accepted and used by a large segment of users, including academic and research institutes as well as leading humanoid robotics companies. As embodied AI continues to advance, the critical role of data has been clearer. Data scarcity remains a primary bottleneck in robot learning, particularly the lack of physical interaction data, which is essential for robots to operate effectively in the real world. Consequently, data quality, reliability, and cost have become major concerns in both research and commercial development. This is exactly where DAIMON excels. Our vision-based tactile technology captures high-quality, multimodal tactile data. Beyond basic contact forces, it records deformation, slip and friction, material properties and surface textures — enabling a comprehensive reconstruction of physical interactions. Building on our expertise in multimodal fusion, we have developed a robust data processing pipeline that seamlessly integrates tactile feedback with vision, motion trajectories, and natural language, transforming raw inputs into training-ready dataset for machine learning models. Recognizing the industry-wide data gap, we view large-scale data collection not only as our unique competitive advantage, but as a responsibility to the broader community. By building and open-sourcing the dataset, we aim to provide the high-quality “fuel” needed to power embodied AI, ultimately accelerating the real-world deployment of general-purpose robotic foundation models. The robotics industry is highly competitive, and many teams have chosen to focus on data. DAIMON is releasing a large and highly comprehensive cross-embodiment, vision-based tactile multimodal robotic manipulation dataset. How were you able to achieve this? We have a dedicated in-house team focused on expanding our capabilities, including building hardware devices and developing our own large-scale model. Although we are a relatively small company, our core tactile sensing technology and innovative data collection paradigm enable us to build large-scale dataset. Our approach is to broaden our offering. We have built the world’s largest distributed out-of-lab data collection network. Rather than relying on centralized data factories, this lightweight and scalable system allows data to be gathered across diverse real-world environments, enabling us to generate millions of hours of data per year. “To drive the advancement of the entire embodied AI field, we have open-sourced 10,000 hours of the dataset for the broader community.” —Prof. Michael Yu Wang, DAIMON Robotics This dataset is being jointly developed with several institutions worldwide. What roles did they play in its development, and how will the dataset benefit their research and products? Besides China based teams, our partners include leading research groups from universities, such as Northwestern University and the National University of Singapore, as well as top global enterprises like Google DeepMind and China Mobile. Their decision to partner with DAIMON is a strong testament to the value of our tactile-rich dataset. Among the companies involved there are some that have already built their own models but are now incorporating tactile information. By deploying our data collection devices across research, manufacturing and other real-world scenarios, they help us to gather highly practical, application-driven data. In turn, our partners leverage the data to train models tailored to their specific use cases. Furthermore, to drive the advancement of the entire embodied AI field, we have open-sourced 10,000 hours of the dataset for the broader community. Equipped with Daimon’s visuotactile sensor, the gripper delicately senses contact and precisely controls force to pick up a fragile eggshell.Daimon Robotics From VLA to VTLA: Why Tactile Sensing Changes the Equation The mainstream paradigm in robotics is currently the Vision-Language-Action (VLA) model, but your team has proposed a Vision-Tactile-Language-Action (VTLA) model. Why is it necessary to incorporate tactile sensing? What does it enable robots to achieve, and which tasks are likely to fail without tactile feedback? Over these years of working to make generalist robots capable of performing manipulation tasks, especially dexterous manipulation — not just power grasping or holding an object, but manipulating objects and using tools to impart forces and motion onto parts — we see these robots being used in household as well as industrial assembly settings. It is well established that tactile information is essential for providing feedback about contact states so that robots can guide their hands and fingers to perform reliable manipulation. Without tactile sensing, robots are severely limited. They struggle to locate objects in dark environments, and without slip detection, they can easily drop fragile items like glass. Furthermore, the inability to precisely control force often leads to failed manipulation tasks or, in severe cases, physical damage. Naturally, the VLA approach needs to be enhanced to incorporate tactile information. We expanded the VLA framework to incorporate tactile data, creating the VTLA model. An additional benefit of our tactile sensor is that it is vision-based: We capture visual images of the deformation on the fingertip surface. We capture multiple images in a time sequence that encodes contact information, from which we can infer forces and other contact states. This aligns well with the visual framework that VLA is based upon. Having tactile information in a visual image format makes it naturally suitable for integration into the VLA framework, transforming it into a VTLA system. That is the key advantage: Vision-based tactile sensors provide very high resolution at the pixel level, and this data can be incorporated into the framework, whether it is an end-to-end model or another type of architecture. DAIMON has been known for its vision-based tactile sensors that can pack over 110,000 effective sensing units.DAIMON Robotics The Technology: Monochromatic Vision-based Tactile Sensing You and your team have spent many years deeply engaged in vision-based tactile sensing and have developed the world’s first monochromatic vision-based tactile sensing technology. Why did you choose this technical path? Once we started investigating tactile sensors, we understood our needs. We wanted sensors that closely mimic what we have under our fingertip skin. Physiological studies have well documented the capabilities humans have at their fingertips — knowing what we touch, what kind of material it is, how forces are distributed, and whether it is moving into the right position as our brain controls our hands. We knew that replicating these capabilities on a robot hand’s fingertips would help considerably. When we surveyed existing technologies, we found many types, including vision-based tactile sensors with tri-color optics and other simpler designs. We decided to integrate the best of these into an engineering-robust solution that works well without being overly complicated, keeping cost, reliability, and sensitivity within a satisfactory range, thus ultimately developing a monochromatic vision-based tactile sensing technique. This is fundamentally an engineering approach rather than a purely scientific one, since a great deal of foundational research already existed. With the growing realization of the necessity of tactile data, all of this will advance hand in hand. DAIMON vision-based tactile sensor captures high-quality, multimodal tactile data.DAIMON Robotics Last year, DAIMON launched a multi-dimensional, high-resolution, high-frequency vision-based tactile sensor. Compared with traditional tactile sensors, where does its core advantage lie? Which industries could it potentially transform? The key features of our sensors are the density of distributed force measurement and the deformation we can capture over the area of a fingertip. I believe we have the highest density in terms of sensing units. That is one very important metric. The other is dynamics: the frequency and bandwidth — how quickly we can detect force changes, transmit signals, and process them in real time. Other important aspects are largely engineering-related, such as reliability, drift, durability of the soft surface, and resistance to interference from magnetic, optical, or environmental factors. A growing number of researchers and companies are recognizing the importance of tactile sensing and adopting our technology. I believe the advances in tactile sensing will elevate the entire community and industry to a higher level. One of our potential customers is deploying humanoid robots in a small convenience store, with densely packed shelves where shelf space is at a premium. The robot needs to reach into very tight spaces — tighter than books on a shelf — to pick out an object. Current two-jaw parallel grippers cannot fit into most of these spaces. Observing how humans pick up objects, you clearly need at least three slim fingers to touch and roll the object toward you and secure it. Thus, we are starting to see very specific needs where tactile sensing capabilities are essential. From Academia to Startup After 40 years in academia — founding the HKUST Robotics Institute, earning prestigious honors including IEEE Fellow, and serving as Editor-in-Chief of IEEE TASE — what motivated you to found DAIMON Robotics? I have come a long way. I started learning robotics during my PhD at Carnegie Mellon, where there were truly remarkable groups working on locomotion under Marc Raibert, who founded Boston Dynamics, and on manipulation under my advisor, Matt Mason, a leader in the field. We have been working on dexterous manipulation, not only at Carnegie Mellon, but globally for many years. However, progress has been limited for a long time, especially in building dexterous hands and making them work. Only recently have locomotion robots truly taken off, and only in the last few years have we begun to see major advancements in robot hands. There is clearly room for advancing manipulation capabilities, which would enable robots to do work like humans. While at Hong Kong University of Science and Technology, I saw increasingly greater people entering this area in the form of students and postdoctoral researchers. We wanted to jumpstart our effort by leveraging the available capital and talent resources. Fortunately, one of my postdocs, Dr. Duan Jianghua, has a strong sense for commercial opportunities. Recognizing the rapid growth of robotics market and the unique value that our vision-based tactile sensing technology could bring, together we started DAIMON Robotics, and it has progressed well. The community has grown tremendously in China, Japan, Korea, the U.S., and Europe. Robots equipped with DAIMON technology have been deployed in factory settings. The company aims to enable robots to achieve “embodied intelligence” and close the gap between what they can see and what they can feel.DAIMON Robotics Business Model and Commercial Strategy What is DAIMON’s current business model and strategic focus? What role does the dataset release play in your commercial strategy? We started as a device company focused on making highly capable tactile sensors, especially for robot hands. But as technology and business developed, everyone realized it is not just about one component, rather the entire technology chain: devices, data of adequate quality and quantity, and finally the right framework to build, train, and deploy models on robots in real application environments. Our business strategy is best described as “3D”: Devices, Data, and Deployment. We build devices for data collection, our own ecosystem, and for deploying them in our partners’ potential application domains. This enables the collection of real-world tactile-rich data and complete closed-loop validation. This will become an integral part of the 3D business model. Most startups in this space are following a similar path until eventually some may become more specialized or more tightly integrated with other companies. For now, it is mostly vertical integration. Embodied Skills and the Convergence Moment You’ve introduced the concept of “embodied skills” as essential for humanoid robots to move beyond having just an advanced AI “brain.” What prompted this insight? What new capabilities could embodied skills enable? After the rapid evolution of models and hardware over the past two years, has your definition or roadmap for embodied skills evolved? We have come a long way now see a convergence point where electrical, electronic, and mechatronic hardware technologies have advanced tremendously in last two decades. Robots are now fully electric, do not require hydraulics, because hardware has evolved rapidly. Modern electronics provide tremendous bandwidth with high torques. If we can build intelligence into these systems, we can create truly humanoid robots with the ability to operate in unstructured environments, make decisions, and take actions autonomously. “Our vision is for robots to achieve robust manipulation capabilities and evolve into reliable partners for humans.” —Prof. Michael Yu Wang, DAIMON Robotics AI has arrived at exactly the right time. Enormous resources have been invested in AI development, especially large language models, which are now being generalized into world models that enable physical AI capabilities. We would like to see these manifested in real-world systems. While both AI and core hardware technologies continue to evolve, the focus is much clearer now. For example, human-sized robots are preferred in a home environment. This is an exciting domain with a promise of great societal benefit if we can eventually achieve safe, reliable, and cost-effective robots. The Road to Real-World Deployment Today, many robots can deliver impressive demos, yet there remains a gap before they truly enter real-world applications. What could be a potential trigger for real-world deployment? Which scenarios are most likely to achieve large-scale deployment first? I think the road toward large-scale deployment of generalist robots is still long, but we are starting to see signs of feasibility within specific domains. It is very similar to autonomous vehicles, where we are yet to see full deployment of robo-taxis, while we have already started to find mobile robots and smaller vehicles widely deployed in the hospitality industry. Virtually every major hotel in China now has a delivery robot — no arms, just a vehicle that picks up items from the hotel lobby (e.g., food deliveries). The delivery person just loads the food and selects the room number. It is up to the robot thereafter to navigate and reach the guest’s room, which includes using the elevator, to deliver the food. This is already nearly 100 percent deployed in major Chinese hotels. Hotel and restaurant robots are viewed as a model for deploying humanoid robots in specific domains like overnight drugstores and convenience stores. I expect complete deployment in such settings within a short timeframe, followed by other applications. Overall, we can expect autonomous robots, including humanoids, to progressively penetrate specific sectors, delivering value in each and expanding into others. Ultimately, our vision is for robots to achieve robust manipulation capabilities and evolve into reliable partners for humans. By seamlessly integrating into our homes and daily lives, they will genuinely benefit and serve humanity. This interview has been edited for length and clarity.