The Register
중도 성향
IT/기술
Brit maritime agency heralds fresh global rules for crewless cargo ships
If you thought driverless cars were bad, imagine a 200,000 ton container ship
IT/기술 · "CREW" · 총 17건
필터 보기현재 지수
50.3
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 85,022건을 분석한 결과, 뉴스 심리지수는 50.3(균형)입니다. 긍정 4,301건(5.1%)·중립 78,707건(92.6%)·부정 2,014건(2.4%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 15.0(중도 균형)입니다.
If you thought driverless cars were bad, imagine a 200,000 ton container ship
Releasing sterilized flies can crash a local population of flesh-eating screwworms. But the US currently has limited capacity to produce them.
Business is back to normal in the orbital station, but one of two newly discovered leaks is still unrepaired
A familiar tactic popularized by chaotic crime crew Lapsus$
The USDA this week confirmed the first known infection of the carnivorous fly larva, which feast on the flesh of living mammals, after the United States eradicated the nightmare bugs in the 1960s.
If confirmed, it would be the fly's first breach of the US-Mexico border.
The director defends investment in and use of AI-generated storyboards, saying the immediacy of communicating his vision to cast and crew is ‘creatively freeing’ Martin Scorsese’s announcement that he has invested in an AI company and uses the technology to create storyboards has triggered a backlash from fellow members of the film industry. The New York Times reported that Scorsese had been appointed in 2025 as a partner and adviser to Black Forest Labs, a German-based venture that specialises in text-to-image generative AI. Continue reading...
This sponsored article is brought to you by Black & Veatch. The biggest challenge facing utilities today isn’t what it seems. It’s not demand, even as load growth accelerates. It’s not extreme weather, even as “major events” become routine. It’s not cybersecurity, even as connections expand across the grid. The real challenge is this: Distribution systems were designed for a different reality. Long gone are the days of predictable demand, one-way power flow and isolated disruptions. At Black & Veatch, we see that leading utilities are no longer debating whether to modernize. They’re deciding how quickly they can do it, and how to do it at scale. Across grid modernization programs globally, three truths consistently emerge. They define what it takes to prepare the distribution system for what’s next: 1. Outage response is not a resilience strategy Resilience is being redefined in real time. A strategy centered on mobilizing crews and restoring service as quickly as possible is reactive, and increasingly insufficient. Resilience has to shift upstream into integrated system design. That starts with hardening. Stronger poles, undergrounding and structural upgrades all have a role, particularly in high-risk corridors. We’re also seeing meaningful gains from how the network is configured and how quickly it can respond without waiting on manual intervention. This is where distribution automation programs can change outcomes. Strategically placed reclosers, automated switches and fault indicators help contain disruptions before they spread. When combined with feeder reconfiguration and updated protection strategies, distribution automation investments allow utilities to set more aggressive recovery targets and achieve measurable reductions in outage duration and customer impact. 2. Future-readiness depends on DERs at scale Forecasting is less and less reliable. Only 19 percent of utilities report strong confidence in their ability to predict future load growth, according to the Black & Veatch 2025 Electric Report. Distributed Energy Resources (DERs) like solar, storage, EVs and behind-the-meter generation are exciting solutions; but they fundamentally change how the system operates. Power is no longer just delivered. It’s injected, stored and redirected in ways the system was never designed to manage. At scale, these challenges show up quickly — particularly on feeders where distributed generation is approaching or exceeding hosting capacity. Protection coordination becomes more difficult when fault current comes from multiple directions. Voltage becomes less predictable as generation fluctuates throughout the day. And planning models must now account for highly variable, location-specific behavior. Distribution modernization is fundamentally changing how the system is designed and operated so it can absorb disruption, manage bi-directional flows and respond in real time. Adapting to bi-directional power flow requires more than incremental updates. Leading utilities are responding by building flexibility into the system, moving beyond static assumptions toward dynamic hosting capacity and interconnection studies, planning that incorporates DER, EV adoption and localized load growth, and infrastructure aligned with the communications and control needed to manage it. 3. The edge must be intelligent, visible and secure As system stress and complexity increase, utilities need far greater visibility and control over the network. Historically, utilities relied on customer calls, Supervisory Control and Data Acquisition (SCADA) at the substation level and field crews to understand what was happening on the system. That model doesn’t hold up. You can’t effectively manage a system you can’t see. Plus, the most critical events are increasingly happening beyond the substation — on feeders, laterals, and at the edge where DER and customer behavior are interacting with the grid. Grid-edge technologies have become essential. Sensors, Advanced Metering Infrastructure (AMI) and automated switching provide the raw data and control needed to move from reactive to proactive operations. In more advanced deployments, utilities are creating centralized control environments that allow operators to see and manage the distribution system in near real time. That capability is enabled by: Advanced communications networks to form the backbone of real-time grid visibility Distribution Management System (DMS) and Outage Management System (OMS) to enable faster, more coordinated system response Analytics, AI and machine learning to improve situational awareness, anticipate system conditions, and support operational decision-making The same connectivity enabling this real-time visibility and control also introduces new vulnerabilities, blurring the line between physical and cyber risk, yet many utilities manage them separately. Only 22 percent have unified teams in place, even as threats continue to rise, including a 50 percent increase in substation attacks and growing exposure to malware and ransomware, according to the Black & Veatch 2025 Electric Report. Cybersecurity and resilient network design must be embedded into the architecture from the outset—not layered on after the fact. See what bolder vision looks like Distribution modernization is fundamentally changing how the system is designed and operated so it can absorb disruption, manage bi-directional flows and respond in real time. To learn about a successful program, check out Georgia Power’s recent grid modernization program. Black & Veatch partnered with the utility on large-scale infrastructure upgrades. The results? Outages are down 76 percent, restoration times have improved by more than 80 percent and communities across Georgia are powered by a grid built to meet the future head-on. When the state faced the most destructive storm in the company’s history, Hurricane Helene, Georgia Power deployed a rapid response team that utilized its “smart grid” and restored power to more than 1 million customers within days. A grid built to meet the future head-on—that’s the result of bolder vision.
United flight 236 from Newark to Palma de Mallorca on Saturday night was forced to turn around just an hour after takeoff due to security concerns around a Bluetooth signal. Multiple Redditors claimed to be on the flight and reported that the crew repeatedly requested passengers to turn off their Bluetooth. According to one poster, […]
Hong Kong could welcome the astronauts of the Shenzhou-23 mission, including the city’s history-making payload specialist, as early as the first half of next year, the technology chief has said. Secretary for Innovation, Technology and Industry Sun Dong also said on Sunday that the government would establish a new space manufacturing research centre under InnoHK by this year, focusing on using 3D printing and artificial intelligence (AI) to support future space development. “I hope that after...
Plus: A ransomware group is now stealing data in person, BusPatrol wants to hand its license plate surveillance data to the cops, and more.
Electrons are great. We use them to move vehicles, illuminate cities, and, of course, compute. But computation is not confined to the world of electronics. And shifting to alternative nonelectronic realms can unlock unique advantages: Photonic chips, for instance, process information with light while generating little heat. Another compelling alternative is fluidics, which uses pressurized gases or liquids to build logic circuits. Pioneered in the 1960s but sidelined by microchips, the field reemerged in the 1990s as “microfluidics.” This approach aims to shrink laboratories onto a single chip by creating microscopic fluid channels with integrated micropneumatic control systems. Today, there is a second fluidic revival, this time in the domain of soft robotics. Scaling microfluidic designs up to the millimeter-scale range (millifluidics) enables the higher flow rates necessary to drive robotic actuators. These robots exploit the nonlinear behaviors of soft materials to create lifelike motion and safer interactions, often utilizing pressurized air. By building systems that “think” with the same air that powers them, we can drastically reduce the need for bulky electronic-to-pneumatic interfaces. This is the focus of my Soiboi Studio robotics lab. With millifluidic logic, I have steadily scaled the complexity of my designs. What began with a simple oscillator has most recently evolved into a clock featuring a soft, four-digit, seven-segment display. What Is Millifluidics? Building on microfluidics research from the early 2000s and recent developments from the Grover Lab at the University of California, Riverside, I’ve developed millifluidic devices using standard 3D printing and silicone casting. The basic architecture is simple: A flexible membrane is sandwiched between rigid layers embedded with networks of air channels. Just as electronics rely on differing voltage potentials, these fluidic circuits operate on the pressure difference between atmospheric pressure (logical 0) and a near-vacuum at around −60 kilopascals of relative pressure (logical 1). Using negative pressure means the membrane is pulled into openings. This creates robust seals that allow me to replicate electronic building blocks. A cast silicone membrane forms the face of the clock [top], while behind it sits 3D-printed millifluidic blocks [middle rows]. An Arduino Uno controls driver boards that operate solenoids, which are connected to valves that are attached to a vacuum pump [bottom row].James Provost While fluidic resistors are easily realized by adjusting the channel geometry, the heart of the system is a valve that mimics a metal-oxide-semiconductor field-effect transistor, or MOSFET. This vacuum “transistor” features a flow layer with two chambers (the source and drain) divided by a central valve seat and a control layer containing a cavity (the gate). A membrane runs between the control and flow layers and normally prevents airflow between the source and drain chambers. To switch the transistor on, a vacuum is applied to the gate chamber, sucking the membrane into the cavity and lifting it off the seat. This opens a path for airflow, equivalent to closing an electric circuit. By adding a small aperture to the membrane, I created a check valve—the fluidic equivalent of a diode. By combining transistors and resistive “pull-down” channels, I can build a full suite of logic gates. The original microfluidic designs that inspired me were fabricated from etched glass and milled acrylic. Adapting them for a standard 3D printer required reengineering the logic elements and mastering two critical fabrication techniques. First, I need airtight prints, yet printed plastic is notoriously porous. By printing at elevated temperatures, slow speeds, and slight overextrusion, I was able to fill microscopic gaps. When you’re using transparent filament, there’s a handy visual indicator: The more transparent the plastic appears, the lower its porosity. Second, I used glass for my print bed. By printing the upper and lower chambers directly against this bed, I got the interface surface to become mirror smooth. This finish is essential for creating reliable, airtight seals. A 0.3-millimeter silicone membrane is placed between the layers and secured with screws. How Does the Soft Clock Work? The clockface is a cast silicone membrane. Each digit segment is formed by a small underlying cavity. When air is evacuated from this cavity, the membrane is sucked inward to create a concave hollow; when atmospheric pressure is restored, the silicone pops back flush with the surface. The result is a mesmerizing, organic motion. The “brain” of the clock is an Arduino Uno, while the fluidics significantly reduce the hardware footprint. A four-digit, seven-segment display with two separator dots would require 29 solenoid valves to control directly. My clock needs just 11 valves. A pneumatic transistor is off when its upper control chamber is at atmospheric pressure [top]. When air is removed from the control chamber, it lifts a membrane, which allows air to flow between lower flow chambers and turns the transistor on [bottom]. James Provost To understand how it works, consider a standard electronic four-digit, seven-segment LED display. This also uses 11 pins to drive its digits. (In clockface displays, an additional pin is required to drive the separator dots.) Every digit is connected to a shared data bus with seven lines, one per segment. The four control lines select individual digits. Only one digit is illuminated at time, and strobing the digits at least 50 times per second creates the illusion that all four are simultaneously illuminated. Such high-speed switching is not possible with air. Instead, I rely on memory. Each segment acts like a capacitor: By evacuating its cavity (logic 1), you “charge” the segment; by restoring atmospheric pressure (logic 0), you discharge it. Hence, each digit acts as an independent 7-bit memory. If the system is sufficiently airtight, the segments maintain their state for several seconds. Like the electronic display, the system utilizes a seven-line data bus. Each line connects to a solenoid valve that provides either vacuum or atmospheric pressure. To selectively address the individual digits, I placed a fluidic transistor between each segment and its data line. All the transistors’ control inputs for a given digit are combined into one “write enable” line connected to its own solenoid valve. Activating this valve allows me to write data into the corresponding digit’s memory. The clock updates one digit per second, meaning a full cycle across the face takes 4 seconds. This cycle also drives the separator dots: A set of fluidic diodes connects the enable lines to the dots’ cavities. Consequently, as each digit is addressed, the dots pulse automatically. This display is more than a clock; it is a soft robot that happens to tell time. By offloading computation to the same air that powers movement, the clock approaches a new class of machines that are simpler, lighter, and more integrated. I’m now developing a guide for getting started with vacuum-powered logic and may release a refined version of this clock in the future. Watching the silicone skin morph serves as a fascinating reminder that not all logic needs silicon; sometimes, all you need is flexible silicone and a flow of air. This article appears in the June 2026 print issue as “The Soft Clock.”
Researchers say 'GREYVIBE' crew used AI tools throughout a campaign targeting Ukrainian military and government
Cybercriminals still allowed to walk into office blocks and convince staff to let them plug in their own thumb drives
On Tuesday, NASA announced several upcoming lunar missions to the Moon's South Pole region. These missions will pave the way for the crewed Artemis landing slated for 2028, starting with three Moon Base missions NASA says are "the first of more than a dozen missions that will be announced this year." In addition to the […]
This comes amid EU regulators tightening the screws on Big Tech.
For years, the field of robotics has used the terms “dull, dirty, and dangerous” (DDD) to describe the types of tasks or jobs where robots might be useful—by doing work that’s undesirable for people. A classic example of a DDD job is one of “repetitive physical labor on a steaming hot factory floor involving heavy machinery that threatens life and limb.” But determining which human activities fit into these categories is not as straightforward as it seems. What exactly is a “dull” task, and who makes that assumption? Is “dirty” work just about needing to wash your hands afterwards, or is there also an aspect of social stigma? What data can we rely on to classify jobs as “dangerous?” Our recent work (which was not dull at all) tackles these questions and proposes a framework to help roboticists understand the job context for our technology. First, we did an empirical analysis of robotics publications between 1980 and 2024 that mention DDD and found that only 2.7 percent define DDD and only 8.7 percent provide examples of tasks or jobs. The definitions vary, and many of the examples aren’t particularly specific (for example, “industrial manufacturing,” “home care”). Next, we reviewed the social science literature in anthropology, economics, political science, psychology, and sociology to develop better definitions for “dull,” “dirty,” and “dangerous” work. Again, while it might seem intuitive which tasks to put into these buckets, it turns out that there are some underlying social, economic, and cultural factors that matter. Dangerous Work: Occupations or tasks that result in injury or risk of harm It’s possible to measure the danger of a task or job by using reported information. There are administrative records and surveys that provide numbers on occupational injury rates and hazardous risk factors. While that seems straightforward, it’s important to understand how this data was collected, reported, and verified. First, occupational injuries tend to be underreported, with some studies estimating up to 70 percent of cases missing in administrative databases. Second, injuries and risk factors are rarely disaggregated by characteristics like gender, migration status, formal/informal employment, and work activities. For example, because most personal protective equipment—such as masks, vests, and gloves—are sized for men, women in dangerous work environments face increased safety risks. These caveats are an opportunity for robotics to be helpful. If we went out and looked for it, we could probably find some less obviously dangerous work where robotics might be an important intervention, not to mention some groups that are disproportionately affected and would benefit from more workplace safety. Dirty Work: Occupations or tasks that are physically, socially, or morally tainted Colloquially, most people might think of dirty work as involving physical dirtiness, such as trash removal, cleaning, or dealing with hazardous substances. But social science literature makes clear that dirty work is also about stigma. Socially tainted jobs are often servile or involve interacting with stigmatized groups (for example, correctional officers), and morally tainted jobs include tasks that people commonly perceive as sinful, deceptive, or otherwise defying norms of civility (like a stripper or a collection agent). “Dirty work” is a social construct that can vary across time (like tattoo industry stigma in the United States) and culture (such as nursing in the U.S. versus in Bangladesh). One way to measure whether work is “dirty” is by using the closely related concept of occupational prestige, captured through quantitative surveys where people rank jobs. Another way to measure it is through qualitative data, like ethnographies and interviews. Similar to “dangerous,” we see some hidden opportunities for robotics in “dirty” work. But one of our more interesting takeaways from the data is that a lower-ranked job can be something that the workers themselves enjoy or find immense pride and meaning in. If we care about what tasks are truly undesirable, understanding this worker perspective is important. Dull Work: Occupations or tasks that are repetitive and lacking in autonomy When it comes to defining dull work, what matters most is workers’ own experiences. Outsiders can make a lot of false assumptions about what tasks have value and meaning. Sometimes things that seem boring or routine create the right conditions for developing skills and competence, such as the concentration needed for woodworking, or for socializing and support, when tasks are done alongside others. Instead of assuming that repetitive work is negative, it’s important to examine qualitative data on how people experience the work and what purpose it serves for them. DDD: An actionable framework In our paper, we propose a framework to help the robotics community explore how automation impacts individual jobs. For each term—dull, dirty, and dangerous—the framework gathers key pieces of information to reflect on what physical or social aspects of the task are, in fact, DDD. Worker perspective is an important part of all three considerations. The framework also emphasizes awareness of context—meaning the physical and social environment of an occupation and industry that can influence the DDD nature of a task. Our corresponding worksheet suggests existing data sources to draw on and encourages us to seek out multiple perspectives and consider potential sources of bias in the information. What makes tasks dull, dirty, or dangerous depends on the perspective of the humans doing those tasks.RAI Let’s take, for example, the waste and recycling industry. The world generates over 2 billion tonnes of waste annually, and this figure is expected to rise to nearly 4 billion tonnes by 2050. Intuitively, trash collection seems like a job that hits all the Ds. Going through our worksheet, we confirm that globally, workers in this industry face significant health hazards (dangerous), and waste collection is ranked as a low-status job (dirty), although interestingly, many workers take pride in providing this essential service. The job is also repetitive, but there are aspects that make it not dull. Specifically, workers cite the day-to-day interaction with their coworkers (which includes extensive insider vocabulary, work hacks, and mutual aid groups) and task variety as two of the most enjoyable aspects of the job. Task variety includes inspecting their vehicle and equipment, driving their truck, coordinating with crew members, lifting bins and bags, detecting incorrect sorting of waste, and unloading at the end destination. This finding matters because some types of robotic solutions will eliminate the parts of the job that workers most appreciate. For instance, the National Institute for Occupational Safety and Health (NIOSH) recommends the adoption of automated side loader trucks and collision avoidance systems. This innovation increases safety, which is great, but it also results in a sole worker operating a joystick in a cab, surrounded by sensor and camera surveillance. Instead, we should challenge ourselves to think of solutions that make jobs safer without making them terrible in a different way. To do this, we need to understand all aspects of what makes a job dull, dirty, or dangerous (or not). Our framework aims to facilitate this understanding. Finally, it’s important to note that DDD is only one of many possible approaches to classify what work might be better served by robots. There are lots of ways we could think about which types of tasks or jobs to automate (for example, economic impact or environmental sustainability). Given the popularity of DDD in robotics, we chose this common phrase as a starting point. We would love to see more work in this space, whether it’s data collection on DDD itself or the creation of other frameworks. At RAI, we believe that the fusion of robotics and social sciences opens a whole new world of information, perspectives, opportunities, and value. It fosters a culture of curiosity and mutual learning, and allows us to create actionable tools for anyone in robotics who cares about societal impact. Dull, Dirty, Dangerous: Understanding the Past, Present, and Future of a Key Motivation for Robotics, by Nozomi Nakajima, Pedro Reynolds-Cuéllar, Caitrin Lynch, and Kate Darling from the RAI Institute, was presented at the 21st ACM/IEEE International Conference on Human-Robot Interaction (HRI) in Edinburgh, Scotland.