Foreign-Trade Zone (FTZ) 19, Notification of Proposed Production Activity; CLAAS Omaha, Inc.; (Combine Harvesters and Adapters); Omaha, Nebraska
[Federal Register Volume 91, Number 224 (Monday, November 23, 2026)]
[Notices]
[Pages 75494-75496]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2026-23806]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-145-2026]
Foreign-Trade Zone (FTZ) 19, Notification of Proposed Production
Activity; CLAAS Omaha, Inc.; (Combine Harvesters and Adapters); Omaha,
Nebraska
CLAAS Omaha, Inc. submitted a notification of proposed production
activity to the FTZ Board (the Board) for its facility in Omaha,
Nebraska within Subzone 19B. The notification conforming to the
requirements of the Board's regulations (15 CFR 400.22) was received on
October 12, 2026.
Pursuant to 15 CFR 400.14(b), FTZ production activity would be
limited to the specific foreign-status material(s)/component(s) and
specific finished product(s) described in the submitted notification
(summarized below) and subsequently authorized by the Board. The
benefits that may stem from conducting production activity under FTZ
procedures are explained in the background section of the Board's
website--accessible via www.trade.gov/ftz.
The proposed finished products include: Combine Harvesters; and
Forage Harvester Attachment Adapters (duty free).
The proposed foreign-status materials/components include: Grease;
Talcum; Ethylene Propylene Diene Monomer Adhesives; Silicone Sealing
Compounds; Petroleum-Based Assembly Pastes; Plastic Edge Protection
Profiles; Plastic Hoses; Plastic Hose Assemblies; Plastic Tubes;
Plastic Fuel Lines; Plastic Pipes; Rubber Tube Fittings; Polyurethane
Gaskets; Plastic, Polyurethane, Rubber, Metal and Fiber Seals; Self-
Adhesive Decals; Sealing Tape; Pressure Locking Bags; Water and Grain
Sampling Tanks; Plastic Tank Caps to Cover/Protect Locks and Guards;
Plastic Fins Plug; Handles for Operator Safety; Plastic and Aluminum
Levers; Rubber, Plastic, and Steel O-rings, Adapter O-Rings; Plastic,
Rubber, and Steel Washers; Sealing Strips and Plastic Flanges; Rubber
Pads; Rubber Sealing Profiles; Rubber Seals; Plastic and Polyurethane
Brake Hoses; Synthetic Rubber Hose Pipes; Hose Assemblies; Hoses;
Synthetic Rubber Fuel Lines; Multi-material Drain Hoses; Plastic with
Rubber Belts; Rubber Foam; Through Guides (i.e., Rubber Grommets);
Rubber Sealing and Lip Profiles; Rubber Coatings; Rubber and Steel
Bushings; Rubber Grommets; Multi-material Hose Supports; Multi-material
Lock Caps; Protective Caps/Guards; Deflectors; Rubber and Steel Strips;
Rubber Blankets; Rubber Protective Cap Covers and Other Covers; Other
Rubber Seals and Lip Profiles; Rubber Insulators/Buffers; Rubber Block
Clamps; Cardboard Foldable Cartons; Paper Leaflets; PVC Canvas
Components for Graintank Extension; Ropes; Straps; Glass Covers;
Cylindrical Collar Structures for Combine Harvester and Other Collars;
Covering Structural Hoods and Other Hoods; Cylindrical Cover Shell
Structure for Combine Harvester; Engine Insulation Components and Other
Insulation; Pack Panel and Cover Structures for Combine Harvester;
Cladding; Cover Plates for
[[Page 75495]]
Engine Insulation Components and Other Cover Plates; Insulating Mats;
Steel (E235, ST37.4) Tubes; Steel (AISI 304, AISI 303) Union Nuts;
Steel and Base Metal Flanges; Steel Elbows; Steel Fittings; Steel
Studs; Steel and Metal Unions; Steel Two-way Connectors; Steel (Alloy
Steel 11SMn30 Case Hardened) Adapters; Steel (Alloy Steel 44SMn28QT
with Carbon Modified) Nipples and Other Nipples; Steel Male Stud
Adapters; Steel (Alloy Steel 11SmnPb30 QT) and Steel with Plastic
Connectors; Steel Couplings; Steel Reducers; Steel Wire Ropes; Steel
Cables; Steel (C45 Carbon Steel) Roller Chains; Steel Link Chains;
Steel Wires; Steel and Steel Coated with Zinc Chains; Steel Eye Bolts;
Steel Screws; Steel (42CRM04 QT, S5CRNI18-10, FE/ZN8/Cn/T2+L, X5CRNI18-
10) Bolts; Steel (C45 QT) Nuts; Steel Rods, Threaded Steel (S355J2C)
Rods, and Rods; Steel Angle Joints; Steel (42CrMo4 QT) and Base Metal
Pins; Adjustable Linkage Steel Forks; Steel (X5CrNi18-10) Shafts; Steel
(DC03, A2) Contact Washers; Steel Plates; Steel (S700MC, S355J2)
Circular Discs/Steel (Stainless Steel A2, Alloy Steel 11SMn30 Case
Hardened, C75S, DC01, A4) Washers; Steel (HC340LA) Sheets/Flat Metal
Linkages; Steel (11SMn30) Alloy Rivets; Snap Rings; Jib Keys; Safety
Device Plugs; Steel (S235JRC) Rings; Steel (S235JRC) Machined
Cylindrical Rod Guides; Steel (C75) and Base Metal Springs; Steel
Clasps; Steel (W3 Spring Steel, S235JRC, HC340LA, S355J2C, Stainless
Steel W1) Clamps; Steel (DC01, S235JRC) Retainers; Steel Support
Brackets; Steel (11SMn30, S355J2G3, E235, X8CrNiS18-9) Sleeves; Steel
(X6Cr17) Gear Discs/Steel Worm Gear Hose Clamp; Steel (S235JRC,
HC340LA) Angles; Steel Support Clamp/Holders; Steel Screw Clips; Steel
Plugs; Steel (S234JRC) Brackets; Steel (S275JR) Pipe Retainer Bands
with Surface Mounting Points; Steel (DX51D+Z275) Lids for Combine
Harvester; Steel (S235JR, E235) Guide Tubes; Steel (S355J2C+C) Shaft/
Sliders; Steel Structural Frames for Combine Harvester; Steel
(80CrV2+QT) Shims; Steel (DC01) Beams; Copper and Steel Sealing Rings;
Steel Hose Connectors; Steel Mat for Diesel Engine; Steel Ball Joint
Heads; Steel Ring Ladders, an Aluminum Ladder Installed on Combine for
Service Access; Specialized Wrench with Interface for Service Panels;
Tool Cases to repair a harvesting machine; Steel Knife Set for Straw
Cutting and Discharge; Lock Mechanisms on Service Panels; Latches to
Close Panels; Door Locks; Locking Pins-Door Locks; Hinges; Gas
(S235JRC) Spring; Steel Pistons; Turning Lock Mechanisms for Panels;
Formed Steel (S235JRC) Cross Bar Section for Latch; Steel (Stainless
Steel A2), Nickel Alloy, Aluminum Alloy, and Copper Alloy Blind Rivets;
Lock Plugs; Tapered Lock Catch Cones; Metal Slow Moving Vehicle Warning
Signs; Diesel Engines with Power Rates Between 343KW to 581KW; Diesel
Engines with Power Rates Between 343KW to 581KW with Compressors; Steel
Pipes; Half Bearings; Engine Cylinders; Variable Displacement Hydraulic
Motor; Oscillating Variable Displacement Pump; Axial Piston Pump;
Grease Pump; Rotating Gear Hydraulic Pump; Gear Pump; Hydraulic Pump;
Rotating Pump System; Rotating Displacement Hydraulic Double Pump;
Windshield Washer Fluid Pump; Fans; Rotors; Fan Variators; Structural
Steel Fabricated Mounts; Containers; Air Conditioning Expansion Tank;
Fuel Coolers; Tank Heater for Diesel Exhaust Fluid System; Engine
Coolant Expansion Tank; Cooling Covers for Radiator Screens; Fuel
Prefilters; Fuel Filter, In-Line Hydraulic Filter, and AC System
Filters; Diesel Engine Exhaust Aftertreatment System; Catalytic
Converters; Nozzles Made from a Combination of Steel, Plastic, Copper,
and Other Materials; Plastic Filling Sieves; Plastic Water Reservoirs/
Tanks; Steel Axle Spacers for Mobile Track System; Threshing Kit, a
Steel Concave Set for a Specific Crop; Soybean Kit, a Steel Concave Set
for Specific Crop; Conversion Sets for Specific Crop Harvesting; Steel
Supports; Steel Structural Frames; Fuel Hose Assemblies; Cool Water
Pipes for Engine Coolant; Ejectors; Exhaust Pipes; Disc-Latches; Steel
Lids; Structural Steel Braces for Combine Integrity; Structural Steel
Spacers; Drive Axles; Steel Strips; Steering Axles; Crawler Track
Undercarriages; Protective Cladding; Handles for Harvester; Lifting
Eyes; Camera Mounts; Communication Modules to Other Machines; Hooks;
Compressed Air Reservoirs; Leather and Cloth Cabin Seats; Brakes; Brake
Pedals; Spoilers; Chutes to Direct and Funnel Air Flow; Steel Linkage
Swing Arms for Motion; Threshing Drum Covers; Locking Devices to Secure
Combine Componentry; Motion Links; Harvester Cylinders; Tension Rods;
Threshing Units; Consoles, a Structural Element of the Combine; Rakes;
Grease Lubrication Lines; Step Floors to Direct Crop Under Threshing
Concave; Steel Gussets; Structural Steel Girdles to Reinforce
Structure; Structural Steel Element in the Form of Pots; Hybrid Units
with Separation Drums, Housings, and Concaves; Grain Troughs; Steel
Axle Pins; Steel Rails; Steel Sieves; Steel Frogmouth Sieves; Backside
Debris Spreaders; Tubular Steel Safety Frames to Prevent Access to
Rotating Machinery; Steel Struts; Various Steel, Plastic, Polyurethane,
and Rubber Coverings for Combine Harvester; Polyvinyl Chloride Sheeting
Straw Guides to Direct Machine's Discharge Downward; Grain Augers;
Grain Elevator Shafts; Sheet Metal Bracket Indicators; Steel
Compression Rings; Steel Filling Heads; Steel Curved Supporting
Structural Ribs for Graintank; General Troughs; Mostly Steel, Movable
Weldment Flaps; Ladder S420MC Supports; Steel Clevis Pins for Combine
Harvester; Steel Handrails; Under Carriage Track Drive System Tracks;
Steel Structural Weldment Engine Console; Steel Choppers; Small Dot-
Matrix Printers; Engine Communication Modules; Accumulators; Tens Pull
Supports as Belt Driver Tensioners; Lubrication Lines; Grease Blocks;
Hydraulic Fittings; Valve Blocks; Steel Couplers; Non-Return Valves;
Quick Release Couplers; Steel and Plastic Valves; Plug Drains;
Hydraulic Line Connector Units; Steel Bearings; Roller Assembly; Steel
Balls; Steel Nilos Rings; Drive Bearing Housing Units with Bearings
Assembled; Gearboxes; Pulleys; Pulley Mounting Structure Supports;
Guide Wheels; Clamping Units; Output Packages as Variable Speed Pulley
Assemblies; Drive Units; Tensioning Units; Rings; Belt Tensioners;
Cylinders; Pulley Bearing Shafts; Drivers as Variable Speed Pulley
Assemblies; Chain Sprockets for Combine Harvester Drive; Pinion AM, a
Chain Sprocket with Embedded Bearing; Clevis Pins; Steel USIT Rings;
Dampers; Rotary Union Hydraulic Arm Joints; Linear Motors; Linear
Drives; Chargers; Engine Alternators; LED Lamps; Deflector Kits with
Vehicle Work and Driving Light for Cab Lighting; Miscellaneous Lights
for Combine Harvesters; Warning Beacons; Rotating Lamps; Headlights;
Work Lamps; Rear Lights and Headlights; Signal Transmitters; Insert-
Headlights; Wiper Arms; Sensors for Nitrogen Oxides from Engine;
Camera; In-Cabin Display Monitors; Buffer Stops; Relay; Switches;
Electrical Light Socket; Junction Distributors for Electrical Feeds;
Jumpers; Electronics Hardware and Modules; Fuse Sockets; Harness for
Camera; GPS; Connection Electrical Cables; Harnesses with Copper
Conductive Core Wire Wrapped Individually with Polymer, then Bundled
and Wrapped in a Protective Conduit; Fuse Pullers; Steel for Step
Ladder Treads; Plastic Trays; Cabin
[[Page 75496]]
Trim for Compartment Opening; Steel Bracket Grinders; Sensors Made from
a Combination of Materials; Temperature Sensors; Pressure Sensors;
Meters to Measure Moisture Content of Harvested Crop; Encoders Made
from a Combination of Materials; and Metal or Plastic Strip Brushes
with Nylon Brush Bristles for Sealing Between Surfaces (duty rate
ranges from duty-free to 9.0%).
The request indicates that certain materials/components are subject
to duties under section 232 of the Trade Expansion Act of 1962 or
section 301 of the Trade Act of 1974, depending on the country of
origin. The applicable section 232 and section 301 decisions require
subject merchandise to be admitted to FTZs in privileged foreign status
(19 CFR 146.41).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary and sent to:
[email protected]. The closing period for their receipt is January 4, 2027.
A copy of the notification will be available for public inspection
in the ``Online FTZ Information System'' section of the Board's
website.
For further information, contact John Frye at [email protected].
Dated: November 18, 2026.
Colin Agostisi,
Executive Secretary.
[FR Doc. 2026-23806 Filed 11-20-26; 8:45 am]
BILLING CODE 3510-DS-P
공식 발표 ↔ 매체 보도
보도 없음
보도 없음
보도 없음