ABC News (US)
진보 성향
정치
Trump appointees vote to address gaps in 'triumphal arch' plan in heated meeting
The National Capital Planning Commission voted Thursday to approve a list of concerns about the president's proposed 250-foot “triumphal arch.”
🇺🇸 미국 · "GAPS" · 총 18건
필터 보기현재 지수
50.0
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 11,558건을 분석한 결과, 뉴스 심리지수는 50.0(균형)입니다. 긍정 1건(0.0%)·중립 11,556건(100.0%)·부정 1건(0.0%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 18.8(중도 균형)입니다.
The National Capital Planning Commission voted Thursday to approve a list of concerns about the president's proposed 250-foot “triumphal arch.”
As concern rises in Europe over threats from an emboldened Russia, the Irish government says it’s working to plug gaps in its military, which reflect a tradition of neutrality.
Downing Street has admitted that messages are automatically deleted from Prime Minister Sir Keir Starmer's mobile phone. The post Prime Minister Starmer’s Phone Messages Self-Destruct, Leaving Gaps in Mandelson Documents Dump appeared first on Breitbart.
The global health care sector is under increasing strain. Decades of chronic underinvestment and constraints in recruitment have coincided with a surge in demand for services for aging populations. Gaps in provision are already taking a toll, with fragmented access to care and high rates of stress and burnout among staff. And it’s getting worse.…
Direct-to-cell technology uses LEO satellites as spaceborne cell towers. It delivers LTE services to existing smartphones without hardware changes, bridging global coverage gaps. What Attendees will Learn How DTC works as a spaceborne cell tower — LEO satellites carry LTE eNodeB payloads in regenerative mode. How they serve unmodified phones using quasi-earth-fixed multi-beam antennas. How the satellite compensates for Doppler shift and time delay on thenetwork side. Why Doppler shift and round-trip time are critical challenges — A LEO satellite’s high velocity causes carrier frequency offsets in OFDMA systems. Pre-compensation at a reference point helps, but cell-edge users still face residual Doppler. How spectrum sharing and regulation shape DTC deployment — DTC has no dedicated spectrum allocation. It relies on spectrum sharing between terrestrial and satellite operators or re-farmed MSS bands. How national regulations like the FCC SCS framework govern access. Where DTC fits in the evolution toward 5G NTN and 6G — DTC is an interim technology offering fast time-to-market satellite services. It bridges the gap until 3GPP NR-NTN matures. How NR-NTN will bring purpose-built NTN features and international spectrum frameworks. Download this free whitepaper now!
President Trump's recently released medical report may contain some important data gaps. CBS News' Dr. Celine Gounder joins with her take on the report.
Axiom Math, a $1.6B AI unicorn, is building a formally verified library of economic theorems — and already found gaps in the foundations of antitrust law.
America is facing a reading catastrophe. Nearly five years after pandemic closures, only 31% of fourth graders can read proficiently, achievement gaps are widening, and student performance continues to slide. Yet instead of treating literacy as an emergency, many of the nation’s most powerful teachers unions remain consumed by political activism — organizing protests, advancing […]
The deadly implosion at a paper mill in Washington and the recent evacuations in Southern California are revealing gaps in the systems meant to protect communities and workers.
Electrons are great. We use them to move vehicles, illuminate cities, and, of course, compute. But computation is not confined to the world of electronics. And shifting to alternative nonelectronic realms can unlock unique advantages: Photonic chips, for instance, process information with light while generating little heat. Another compelling alternative is fluidics, which uses pressurized gases or liquids to build logic circuits. Pioneered in the 1960s but sidelined by microchips, the field reemerged in the 1990s as “microfluidics.” This approach aims to shrink laboratories onto a single chip by creating microscopic fluid channels with integrated micropneumatic control systems. Today, there is a second fluidic revival, this time in the domain of soft robotics. Scaling microfluidic designs up to the millimeter-scale range (millifluidics) enables the higher flow rates necessary to drive robotic actuators. These robots exploit the nonlinear behaviors of soft materials to create lifelike motion and safer interactions, often utilizing pressurized air. By building systems that “think” with the same air that powers them, we can drastically reduce the need for bulky electronic-to-pneumatic interfaces. This is the focus of my Soiboi Studio robotics lab. With millifluidic logic, I have steadily scaled the complexity of my designs. What began with a simple oscillator has most recently evolved into a clock featuring a soft, four-digit, seven-segment display. What Is Millifluidics? Building on microfluidics research from the early 2000s and recent developments from the Grover Lab at the University of California, Riverside, I’ve developed millifluidic devices using standard 3D printing and silicone casting. The basic architecture is simple: A flexible membrane is sandwiched between rigid layers embedded with networks of air channels. Just as electronics rely on differing voltage potentials, these fluidic circuits operate on the pressure difference between atmospheric pressure (logical 0) and a near-vacuum at around −60 kilopascals of relative pressure (logical 1). Using negative pressure means the membrane is pulled into openings. This creates robust seals that allow me to replicate electronic building blocks. A cast silicone membrane forms the face of the clock [top], while behind it sits 3D-printed millifluidic blocks [middle rows]. An Arduino Uno controls driver boards that operate solenoids, which are connected to valves that are attached to a vacuum pump [bottom row].James Provost While fluidic resistors are easily realized by adjusting the channel geometry, the heart of the system is a valve that mimics a metal-oxide-semiconductor field-effect transistor, or MOSFET. This vacuum “transistor” features a flow layer with two chambers (the source and drain) divided by a central valve seat and a control layer containing a cavity (the gate). A membrane runs between the control and flow layers and normally prevents airflow between the source and drain chambers. To switch the transistor on, a vacuum is applied to the gate chamber, sucking the membrane into the cavity and lifting it off the seat. This opens a path for airflow, equivalent to closing an electric circuit. By adding a small aperture to the membrane, I created a check valve—the fluidic equivalent of a diode. By combining transistors and resistive “pull-down” channels, I can build a full suite of logic gates. The original microfluidic designs that inspired me were fabricated from etched glass and milled acrylic. Adapting them for a standard 3D printer required reengineering the logic elements and mastering two critical fabrication techniques. First, I need airtight prints, yet printed plastic is notoriously porous. By printing at elevated temperatures, slow speeds, and slight overextrusion, I was able to fill microscopic gaps. When you’re using transparent filament, there’s a handy visual indicator: The more transparent the plastic appears, the lower its porosity. Second, I used glass for my print bed. By printing the upper and lower chambers directly against this bed, I got the interface surface to become mirror smooth. This finish is essential for creating reliable, airtight seals. A 0.3-millimeter silicone membrane is placed between the layers and secured with screws. How Does the Soft Clock Work? The clockface is a cast silicone membrane. Each digit segment is formed by a small underlying cavity. When air is evacuated from this cavity, the membrane is sucked inward to create a concave hollow; when atmospheric pressure is restored, the silicone pops back flush with the surface. The result is a mesmerizing, organic motion. The “brain” of the clock is an Arduino Uno, while the fluidics significantly reduce the hardware footprint. A four-digit, seven-segment display with two separator dots would require 29 solenoid valves to control directly. My clock needs just 11 valves. A pneumatic transistor is off when its upper control chamber is at atmospheric pressure [top]. When air is removed from the control chamber, it lifts a membrane, which allows air to flow between lower flow chambers and turns the transistor on [bottom]. James Provost To understand how it works, consider a standard electronic four-digit, seven-segment LED display. This also uses 11 pins to drive its digits. (In clockface displays, an additional pin is required to drive the separator dots.) Every digit is connected to a shared data bus with seven lines, one per segment. The four control lines select individual digits. Only one digit is illuminated at time, and strobing the digits at least 50 times per second creates the illusion that all four are simultaneously illuminated. Such high-speed switching is not possible with air. Instead, I rely on memory. Each segment acts like a capacitor: By evacuating its cavity (logic 1), you “charge” the segment; by restoring atmospheric pressure (logic 0), you discharge it. Hence, each digit acts as an independent 7-bit memory. If the system is sufficiently airtight, the segments maintain their state for several seconds. Like the electronic display, the system utilizes a seven-line data bus. Each line connects to a solenoid valve that provides either vacuum or atmospheric pressure. To selectively address the individual digits, I placed a fluidic transistor between each segment and its data line. All the transistors’ control inputs for a given digit are combined into one “write enable” line connected to its own solenoid valve. Activating this valve allows me to write data into the corresponding digit’s memory. The clock updates one digit per second, meaning a full cycle across the face takes 4 seconds. This cycle also drives the separator dots: A set of fluidic diodes connects the enable lines to the dots’ cavities. Consequently, as each digit is addressed, the dots pulse automatically. This display is more than a clock; it is a soft robot that happens to tell time. By offloading computation to the same air that powers movement, the clock approaches a new class of machines that are simpler, lighter, and more integrated. I’m now developing a guide for getting started with vacuum-powered logic and may release a refined version of this clock in the future. Watching the silicone skin morph serves as a fascinating reminder that not all logic needs silicon; sometimes, all you need is flexible silicone and a flow of air. This article appears in the June 2026 print issue as “The Soft Clock.”
Among some nuclear strategists, military officers, and lawmakers, a belief bordering on the canonical has taken root that the United States is on the short end of a “deterrence gap” with Russia and China. Both countries, and especially Russia, possess theater-range nuclear weapons, whose comparatively small yield is thought to lower the threshold for their use. The relative dearth of these capabilities on the American side, so the thinking goes, denies Washington the ability to answer a limited regional nuclear strike with a comparable response and thus deter such an attack in the first place. Adversaries may therefore see an The post Contriving Imaginary Gaps in Nuclear Deterrence appeared first on War on the Rocks.
To further muddy the waters, internal Park Service records cited by the Times indicate that Atlantic Industrial Coatings initially failed multiple attempts to seal the gaps between the Reflecting Pool’s concrete slabs, the very leaks the renovation was supposed to address.
The bizarre U-shape is thanks to a decades-old federal regulation.
Patients who use mobile applications to manage medical conditions including depression and chronic pain might assume the apps have been evaluated by regulatory agencies to be safe and effective. But that isn’t necessarily the case. Most of the more than 55,000 medical apps that claim to diagnose or treat a condition—or ones that provide clinical decision support, known as “therapeutic” apps—have never been assessed by any trusted neutral bodies or regulatory agencies to evaluate them for technical soundness, ethical design, or clinical benefit. The apps often don’t comply with regional data security and privacy laws to protect people’s sensitive health information. Medical apps differ from traditional wellness apps, which provide users with insights into becoming healthier by, for example, tracking fitness activities, monitoring blood pressure, and analyzing sleep patterns. There is no reliable way to verify that therapeutic apps deliver the results they indicate. To help ensure such apps are credible, the IEEE Standards Association (IEEE SA) recently launched the IEEE Global Medical Mobile App Assessment and Registry. The publicly searchable directory is designed to list apps that have been vetted by experts across several criteria including technical soundness, ethical design, compliance with data security and privacy regulations, and clinical efficacy, which is evidence of a clinical benefit for the patient. “Patients, clinicians, payers, and health care systems often struggle to distinguish clinically meaningful therapeutic apps from those that are simply well-marketed,” says IEEE Senior Member Yuri Quintana, chair of the assessment and registry program. He is chief of the clinical informatics division at Beth Israel Deaconess Medical Center, in Boston. “Our goal is to establish a standardized review method using criteria developed by experts.” Why regulation is lacking Because the apps are intended for medical use without being part of a medical implement, they fall under the designation of software as a medical device (SaMD), according to the International Medical Device Regulators Forum. SaMD is supposed to be regulated by public health agencies such as the U.S. Food and Drug Administration, but the apps have developed and grown in popularity so quickly that regulators haven’t been able to keep up, Quintana says. Some companies have received approval, but most have not, he says. Many users are unaware of the regulatory gap, he says. “Seeing an app from a well-known company often creates the impression that it has been meaningfully vetted for safety and efficacy, even when that is not the case,” he says. Some companies are using deceptive advertising to sell their product, he adds. Marketing materials might claim that all of a company’s health apps are certified, even though only one app has been approved by a regulatory body to treat a particular condition. Or the verbiage might imply the company has clinical evidence proving its application works, even though the app has never been tested independently. Another concern is that updated apps aren’t being vetted, says Maria Palombini, IEEE SA’s director of health care and life sciences global practice lead. “The original app might have received approval from a regulatory agency, but not the updated version,” Palombini says. “There could have been significant changes from the original.” “Not every medical-related app triggers the same regulatory classification or review across jurisdictions,” Quintana adds. “That leaves a large gray zone of clinically relevant but lower-risk apps that haven’t undergone an independent assessment. The IEEE registry was created to help fill these gaps. “IEEE is the best organization to address this problem because this is fundamentally a standards, trust, interoperability, and conformity assessment challenge,” he says. IEEE “is the world’s largest technical professional organization, with deep expertise in developing globally recognized standards including in health care, cybersecurity, AI ethics, and interoperability.” “Through the IEEE Conformity Assessment Program, we already run rigorous assessment and registry programs,” Palombini says. “Our neutral, consensus-driven, multidisciplinary approach—bringing together clinicians, regulators, developers, and ethicists without commercial bias—makes IEEE uniquely positioned to create trustworthy global guardrails that can scale across jurisdictions and support regulatory harmonization.” How the registry works The assessment framework was developed by a multidisciplinary group of 35 volunteer experts from 10 countries, Quintana says. The panel includes academics, AI experts, app developers, clinicians, ethicists, mental health experts, patient advocates, regulators, researchers, technologists, and those who assess safety in health care. The registry is for any app used for clinical care or therapeutics that claims to demonstrate a medical benefit. That includes apps designed for cardiology, diabetes, mental health, neurology, oncology, rehabilitation, and respiratory diseases, Quintana says. Initially, he says, the focus will be on apps that aim to treat mental health conditions, given the large number of offerings in that area and the registry committee’s expertise. The submission of apps is voluntary. There is no government mandate that requires a company to use the IEEE registry. The products will be evaluated against about 150 consensus-based criteria across three major areas: Clinical efficacy including therapeutic effectiveness, any sustained benefits, risk management, comparison to standard care, user engagement, and real clinical value. Technical soundness including accessibility, privacy and security, error handling, interoperability, AI governance, usability, and operational quality. Ethical design including bias prevention, patient consent, data governance, conflict-of-interest transparency, responsible use of AI and large language models, and prioritization of public health benefits. IEEE charges a nonrefundable submission fee that covers the cost of the assessment plus the registry’s annual subscription for the first year. Developers first must demonstrate they are a legally established entity before they can complete the app publisher registration form and then submit documentation and attestations about the product. The IEEE review of an app is estimated to take six to eight weeks, Palombini says. The assessment results will be privately shared with the app publisher, she says, and to be listed in the registry, an app must achieve more than 85 percent compliance in each category. Upgraded apps must be submitted and reassessed, Palombini says. Similar to how users are notified when an app on their smart devices has , the registry will be notified when listed apps have a new update available, she says. Applicants who do not pass the assessment are to receive feedback explaining why. They will be given an opportunity to make changes or provide additional documentation, Palombini says. “It’s a pretty methodological process, with checks and balances,” Quintana says. “We’re being very transparent about the process.” Approved apps added to the registry receive an IEEE certification badge and submission identifier, which the company can display on its website, app store listings, and marketing materials. “The badge serves as visible proof that the app has met the independent, consensus-based assessment for clinical value, technical robustness, and ethical design,” Quintana says. The registry will be publicly available at no cost, he says. Patients and families seeking safe, trustworthy apps—and payers and insurers evaluating reimbursement potential—will find the registry helpful, he says. The application website is open. The public registry page does not yet list a specific count of approved apps because assessments are ongoing. Approved apps and their unique identifiers are to be published when the initial reviews are completed. To learn more, you can watch a webinar recorded in March. The assessment framework that underpins the registry is supporting the formal recognition of IEEE P3962 Standard for Criteria Assessment Framework f
In 2006, the U.S. Army’s 25th Combat Aviation Brigade deployed to Iraq, where it paired Task Force ODIN (Observe, Detect, Identify, and Neutralize) with an Apache battalion from the 82nd Airborne Division — a first-of-its-kind teaming of attack helicopters with drones. These units combined manned and unmanned sensors to identify and destroy improvised explosive devices and high-value targets, leveraging drones to fill gaps in traditional rotary wing aviation. Col. Jamie LaValley, at the time a captain with the 82nd, told me he felt he was witnessing “the future of warfare.” “Man, Army Aviation is on to something,” he recalls thinking. The post Army Aviation’s Wasted Decade: Lessons for the Next Generation of Drone Integration appeared first on War on the Rocks.
Given how integral the Internet has become to everyday tasks such as shopping, paying bills, and holding virtual meetings, it’s interesting that nearly 30 percent of the global population still has no access to it. More than 2 billion people are still offline, according to a report released in November by the International Telecommunication Union. More and more people are being connected, though, thanks to IEEE Future Networks’ Connecting the Unconnected (CTU) and similar programs. Since 2021, the technical community has been working to accelerate the development, standardization, and deployment of 5G, 6G, and future generations. Every year, CTU holds a worldwide competition to seek out innovators who are in the early stages of developing technologies or applications to provide greater access. It also holds an annual summit that brings together experts, community leaders, and other interested parties to discuss strategies to expand access and foster digital inclusion. CTU expanded in several ways last year. It launched regional summits to focus on local connectivity issues, organized community-focused events, and established an expanded mentorship program to further support contest winners and the next generation of technological innovators impacting humanity. The program also partners with the IEEE Standards Association (IEEE SA) to develop guidelines for some of the submitted innovations. “IEEE Future Networks has created a community to bring all these initiatives working on digital connectivity together in a single platform and leverage the IEEE brand to help raise the visibility of their work,” says IEEE Life Fellow Sudhir Dixit, a CTU cochair and a Basic Internet Foundation cofounder, which also works to expand Internet access. A contest for new connectivity methods The CTU challenge, launched in 2021, typically receives 200 to 300 submissions each year, Dixit says. Last year 245 projects from 52 countries were submitted. Participants include academics, nonprofit organizations, startups, and students. Projects can be entered into one of three categories. The Technology Applications category is for new connectivity methods or innovations that broaden broadband access. Those who improve the affordability of Internet services can enter the Business Model category. The Community Enablement category is for strategies that promote public broadband adoption. After selecting a category, entrants choose between two tracks based on their project’s maturity. The proof-of-concept route is for early-stage but functional technology that has already produced results. The conceptual path is for projects in the theoretical phase that have not undergone full testing. “IEEE Future Networks has created a community to bring all these initiatives working on digital connectivity together in a single platform and leverage the IEEE brand to help raise the visibility of their work.” —Sudhir Dixit, Connecting the Unconnected cochair Last year’s challenge submission period was from March to June, with judging phases from June through November. The 20 winners presented their solutions in December at a virtual Winners Summit. Fourteen projects received prize money, ranging from US $500 to $2,500. Six finalists earned an honorable mention at the summit. The awards amounts have varied over the years, based on the sponsorship. Among the winners were a solar-powered community broadband network in Tanzania, a low-cost method for accessing the Internet that uses FM radio and a short message service (SMS), and a strategy for utilizing India’s rural broadband infrastructure to deliver medical services to people living in isolated, tribal, and other underserved regions. “Our job is to help further develop the technology, look for gaps, and see if it is good enough to be applied to rural villages, like those in Africa and India,” says IEEE Fellow Ashutosh Dutta, who is a CTU cochair and a professor at Johns Hopkins University, in Baltimore. “The idea behind the contest is to make sure the technology actually gets implemented at the grassroots level and is being used by the local community.” This year’s challenge submission period runs until 19 June, with judging phases from July through October. The finalists of the 2025 IEEE Connect the Unconnected challenge describe their projects.IEEE Future Networks Local connectivity discussions The CTU program hosted three regional summits last year. The North American event was held in September in Washington, D.C. In November, the Global/Asia-Pacific meeting took place in Bangalore, India; it was co-located with the IEEE Future Networks World Forum. The Europe, Middle East, and Africa summit also was held in November, in Abuja, Nigeria. Topics discussed at the summits included infrastructure solutions for universal connectivity; sustainable business models; scaling homegrown technologies; and policy, regulation, and financing issues. As of press time, the dates for this year’s regional summits had not been announced. Community-focused events To help bridge the gap between ideas and their deployment, the Connect a Community event was established to demonstrate how some new technologies might benefit people. The inaugural event was held in November in Bengaluru, India. During the daylong program, 10 of the challenge winners demonstrated their connectivity solutions to villagers from seven rural communities. Dutta credits IEEE Life Fellow Rakesh Kumar with devising the event. Kumar chairs IEEE Future Directions, which was where Future Networks got its start in 2017 as the 5G Initiative. “Kumar wants to ensure the winning technologies are going to be useful for the community,” Dutta says. Providing entrepreneurs with business skills Dixit says the Future Networks team believed that simply conducting a competition and distributing prizes wasn’t enough. “We wanted to follow up with the winners, monitor their progress, and help them turn their ideas into a business,” he says. To accomplish that, IEEE launched the Empowerment Through Mentorship program, in which budding entrepreneurs are paired with industry leaders and experienced mentors who provide them with 1,000 days of guidance, coaching them on scaling up their business. “We launched the mentorship program to further the cause,” Dixit says. “These people may be good at developing technology, but they don’t know the marketing challenges, how to raise money, and other factors.” The Lemelson Foundation, an organization in Portland, Ore., that partners with IEEE, collaborated on the mentorship program. The foundation’s philanthropic strategy is to cultivate a robust ecosystem for entrepreneurs in East Africa, India, and the United States. It does so by providing the entrepreneurs with tools including financing options and access to communities that share their passion. The foundation chose to partner with IEEE “because of its powerful international network and focus on electrical engineering, which is a critical element of communications and energy infrastructure globally,” says Kory Murphy, Lemelson’s program officer for U.S. invention and entrepreneurship. “Other factors include IEEE’s focus on nontraditional or disadvantaged areas in India,” Murphy says, “and its recognition that mentorship is critical for the successful deployment of new technologies.” IEEE began an early pilot project in 2023 with support of a grant from the Lemelson Foundation, to determine if a sustained entrepreneurship mentorship program was valuable and necessary, he says. It then conducted a survey through 2024 to collect information to better understand the needs of stakeholders, mentors, and entrepreneurs in hard-to-reach areas in India. While the early pilot program was restricted to that country, its intent was to learn from the experience and share the findings globally, he says. “Our job is to help further develop the technology, look for gaps, and see if it is good enough to be applied to rural villages, like those in Africa and India.” —Ashutosh Dutta, Connecting the Unconnected cochair “The foundation’s involvement was aimed at testing certain activities, partnership strategies, and understanding the budgetary requirements for a prepilot program,” he says. “The primary goal of the foundation is to enable conditions for innovation to occur within regional systems, especially addressing the opportunity for sustained, systematic, and relational mentorship in technology innovation.” The Empowerment Through Mentorship program is structured into three tiers. One focuses on individuals and their needs, the program/technical level focuses on the invention, and the venture level guides participants from the initial concept through product testing and validation. Within each track, participants engage in activities such as networking, securing financial support, and pitching their innovations, Murphy says. “The 1,000-day approach reflects the belief that it requires a long period of time to coach and support those who traditionally are excluded,” he says. CTU mentors can be IEEE members or nonmembers who are successful entrepreneurs and own small or large companies, Dixit says. They also can work in academia. “They need to be passionate about training and mentoring other people,” Dixit says. “We have created a curriculum that covers topics such as ways to get financing from investors and how to turn ideas into a profitable business. It’s not the technology that will make the product successful; it’s everything else that goes into it.” Rural broadband architecture standards To determine whether any of the challenge’s submitted projects have the potential to become a standard, the CTU working group collaborates with the IEEE SA Industry Connections program’s 6G Rural Connectivity and Intelligent Village activity. Projects considered for standards do not have to be winners. Any project that has successfully passed the first phase, completed the second-phase requirements, and requested a review may be considered. Typically, about half of the submitted projects are reviewed for possible standard implications, Dutta says. “We selected about 60 submissions that could be potentially standardized,” he says. “Out of those, we work with IEEE SA’s rapid reactive standards activity group to narrow them down to five or 10 that can be potentially standardized. “The CTU program is not only about developing a technology or implementing it, but also standardizing it so that people around the world can use the standard.” One such project led to the development of IEEE P1962, “Standard for Providing Broadband Connectivity to Rural Infrastructure by Utilizing Solar Panels as Optical Communication Receivers.” It specifies an architecture for an optical receiver that uses solar panels and associated circuitry to provide energy-efficient, affordable, and high-speed optical wireless communication. “CTU has created a platform for the world to bring their ideas to one single place where people can talk to each other about them,” Dixit says. “We are a unifying force. We bring these many dimensions together to connect the unconnected.” CTU Challenge Winner: Community Radio Bolo The Connecting the Unconnected program offers contestants benefits that extend beyond the recognition and rewards. One participant who benefited is Ritu Srivastava, a telecommunications engineer and IEEE member. She placed first in the 2022 technical concept category for her project, Community Radio Bolo (CR Bolo). The verb bolo means speak in Hindi. Internet services in India’s rural areas are either unavailable or have spotty coverage. People there rely on community radio stations to get news about local events and issues. There are about 300 such stations in India, Srivastava says. To provide broadband Internet access in the Bhadrak district of Odisha, India, she developed a cost-effective hybrid network that uses an online and offline wireless mesh network installed on the tower of community radio station Radio Bulbul. Several transceiver locations, known as access points, are located at schools and community centers that are within a 5- to 7-kilometer radius, connecting them with Radio Bulbul. CR Bolo includes a plug-and-play interactive voice response system that is coupled with the hybrid wireless network. The automated telephony technology routes callers using voice commands or a telephone’s keypad to the appropriate department. The system also has a direct-to-consumer platform where manufacturers sell their products through websites or mobile apps. “CR Bolo is a unique method of leveraging rural traditional technologies and infrastructure combined with modern technology to provide meaningful access to communities,” Srivastava says, “improving livelihood opportunities and creating social and economic viability for CR stations.” She says she plans to expand the project to other rural communities in India. She will incorporate a large language model and offer a learning management system to deliver training programs and educational courses, she says. Winning CTU inspired her to become a more active IEEE volunteer, she says. She is working with the IEEE Standards Association to develop guidelines for the architecture of broadband technology used in rural areas. Because of her entrepreneurial experience, CTU hired her in 2023 to assist with the challenge and the Empowerment Through Mentorship program. Srivastava is a director at Jadeite Solutions in New Delhi. The consulting company offers nonprofit organizations that are developing socioeconomic programs with project evaluation, impact assessment, financial reviews, and similar services. She credits CTU with giving her and her community-centered model more exposure: “The CTU challenge has given me a lot of other opportunities in terms of networking, funding resources, publishing my research in IEEE journals, and presenting at national and international conferences.”
Cybersecurity consultants have never been more in demand. Information security analyst roles are projected to grow nearly 30 percent between now and 2034, according to the U.S. Bureau of Labor Statistics. More than 15 million cybercrime incidents occurred worldwide in 2024, Statista reported. Data breaches are costly and pose direct safety risks. Statista reported that more than US $10 trillion is spent annually repairing the damage caused by cybercrime, most commonly phishing, spoofing, extortion, and data breaches. In one example in the United States, breathalyzer devices installed in vehicles became disabled, leaving hundreds of drivers stranded, as detailed in an IEEE Spectrum article. To help you acquire the skills you need to distinguish yourself from other cybersecurity job candidates, the IEEE Computer Society offers a “What Makes a Great Cybersecurity Consultant” guide. The 23-page PDF includes hard and soft skills you need, a list of certifications to pursue, and key IEEE cybersecurity conferences for staying updated on developments in the field. The guide includes advice from two cybersecurity experts. John D. Johnson, an IEEE senior member, is the founder and CEO of Aligned Security in Bettendorf, Iowa. Ricardo J. Rodriguez is an associate professor of computer science and systems engineering at the Universidad de Zaragoza, in Spain, who researches digital forensics and other cybersecurity topics. “Technology, remote work, and a shortage of skilled workers make this the ideal time to consider becoming a cybersecurity consultant,” Johnson says in the guide. “Consulting can give you the flexibility, variety, and control over where you want your career to go.” Hard and soft skills At a minimum, cybersecurity professionals should have a general understanding of IT including operating systems, communication protocols, network architecture, and programming languages such as C++, Java, and Python. They also should be well-versed in security auditing, firewall management, penetration testing, and encryption technologies. The principles of ethical hacking and coding would be handy as well. “To be able to defend a system well, you first have to know how to attack it,” Rodriguez says. The guide explains that there are now more technologies available to help cybersecurity consultants monitor threats and protect systems. They include security orchestration, automation, and response (SOAR) platforms, which automate workflows to collect security data, streamline incident response, and automate repetitive tasks. Rodriguez points to advances in domain name system security extensions (DNSSEC), which uses digital signatures based on public-key cryptography to strengthen the authentication of the domain name system. By validating data authenticity, DNSSEC safeguards against attacks such as DNS spoofing and guarantees that users connect to the correct IP address. Technologies such as artificial intelligence, blockchain, and quantum computing will increasingly be used to help thwart cyberattacks, the guide suggests. AI is expected to enhance the quality of data analysis, Rodriguez says. Although hard skills are important, soft skills are just as crucial, according to the guide. Critical thinking, project management, flexibility, teamwork, and organizational and presentation skills are essential. It’s not enough to be good at analyzing security vulnerabilities; you also need to clearly describe the situation and explain possible solutions. “Soft skills are important to achieve good team cohesion,” Rodriguez says, “because consultants often lead diverse teams from within their client’s organization.” “It’s essential,” Johnson adds, “that you demonstrate to clients you’re a team player and a capable communicator, and that you meet your commitments.” Security certifications Possessing security-specific credentials is a valuable way to demonstrate your expertise to potential clients, according to the guide. Because hundreds of certifications are available, Johnson says, pinpointing the most relevant ones can be challenging. Some people focus on theoretical knowledge, while others want to cover practical applications of technology. “Survey the industry and compare it to your skills,” Johnson recommends. “Decide what you want to do, and identify where you have gaps in your skills and experience.” Here are four of the nine certifications listed in the guide that are frequently cited as being important. All the providers are cybersecurity organizations. Certified information security manager. This globally recognized certification from the ISACA is for professionals managing enterprise information security. Certified cloud security professional. Offered by ISC2, this credential validates advanced technical skills in designing, managing, and securing cloud infrastructure. Certified ethical hacker. This certification from the International Council of E-Commerce Consultants (C-Council) confirms proficiency in using methods commonly employed by malicious hackers to detect vulnerabilities. Offensive security certified professional. A hands-on, 24-hour certification exam offered by OffSec covers practical testing skills. Additional industry-specific certifications might be required for organizations in finance, government, health care, or manufacturing. Sound general knowledge—backed by experience, training, and certification—is an essential foundation for being a specialist, Johnson says. Conferences and networking opportunities Events sponsored by the IEEE Computer Society can help you learn about the latest research and advancements in cybersecurity: IEEE Symposium on Security and Privacy, from 18 to 21 May in San Francisco. IEEE European Symposium on Security and Privacy, from 6 to 10 July in Lisbon. IEEE International Conference on Cyber Security and Resilience, from 3 to 5 August in Lisbon. IEEE Secure Development Conference, from 14 to 16 October in Indianapolis. Conferences can give you insight into the field and let you do some networking, but it’s important to network elsewhere as well, experts say. Consider joining the IEEE Technical Community on Security and Privacy, which connects experts and professionals advancing research in areas such as encryption, operating system security, and data privacy. Learning and meeting people keeps your knowledge sharp and can lead to mentorship opportunities with established cybersecurity consultants, Johnson says. Other IEEE resources The IEEE Computer Society’s cybersecurity resources page offers a wealth of information including fundamentals, possible career paths, and standards development. To keep you updated on trends, the society publishes IEEE Transactions on Privacy and the IEEE Security and Privacy magazine. In addition to the guide, the IEEE Learning Network offers nearly 30 courses on cybersecurity. And you can find research papers in the IEEE Xplore Digital Library.
After failing to reach an agreement in the first round of talks in Islamabad, the United States and Iran are set to resume talks in the coming days. Via Pakistani mediation, U.S. and Iranian negotiators have reportedly made progress toward a framework agreement, though significant gaps remain and a deal is far from guaranteed. In the meantime, President Donald Trump has imposed a blockade on Iranian ports, while Israel is pressing ahead with its assault on the Lebanese border town of Bint Jbeil, even as it engages in direct talks with Lebanon in Washington. The two-week ceasefire with Iran is The post A Fragile Ceasefire with Iran and the Price of Ending the War appeared first on War on the Rocks.