Fortune
중도 성향
IT/기술
AI is turning workers into superhumans. Their leadership teams haven’t kept up
Employees are scaling productivity at record speed while leadership teams remain stuck in decades-old decision-making structures.
🇺🇸 미국 · IT/기술 · "LEADERSHIP" · 총 9건
필터 보기현재 지수
50.0
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 11,267건을 분석한 결과, 뉴스 심리지수는 50.0(균형)입니다. 긍정 1건(0.0%)·중립 11,265건(100.0%)·부정 1건(0.0%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 18.7(중도 균형)입니다.
Employees are scaling productivity at record speed while leadership teams remain stuck in decades-old decision-making structures.
Read the internal memo detailing what Microsoft employees told leadership about work, managers, and change.
Comments
The OnCampus program, administered by IEEE Educational Activities, last year expanded its engineering experiences from two to seven universities. Part of TryEngineering, the program is held at universities around the world, offering preuniversity students hands-on opportunities to solve engineering problems. The IEEE Innovation Committee provided funding for the additional locations. New participating institutions The electrical engineering and computing faculty at the University of Zagreb, in Croatia, hosted a two-day program in June. Twenty-five children ages 10 to 14 participated in lectures and workshops on artificial intelligence, computer science, robotics, and astronomy. Tomislav Jagušt, an IEEE senior member and the chair of the IEEE preuniversity coordinating committee, led the program. In September the Arab Academy for Science, Technology, and Maritime Transport’s engineering college held a two-day session at its Abu Kir, Egypt, campus. Fifty students participated in hands-on activities on Ohm’s law, radio communications, and circuit building. They also learned from professors about engineering careers and job opportunities. Also in September, the Majan University College, in Muscat, Oman, hosted 40 high school students who competed in six challenges to design and build circuits. These include an IoT design and an LED brightness control using a potentiometer, a three-terminal, manually adjustable resistor that functions as a variable voltage divider. The program also highlighted AI and quantum computing technologies and introduced students to job opportunities in the fields. The workshop transformed curiosity into creation, empowering students with technical skills and confidence in emerging technologies. In November at the Universiti Malaysia Perlis, in Arau, 50 students explored the fundamentals of quantum computational intelligence and AI through hands-on activities and interactive simulations. IEEE Senior Member Mohd Hafiz Ismail, a professor of electronic engineering and technology, gave an introduction about quantum computing intelligence technology. The Hellenic Robotics Center of Excellence at the National Technical University of Athens hosted a two-day session in December. Twenty-five students explored robotics and AI through hands-on design challenges such as TryEngineering’s AI and machine learning methods. They also toured the university’s research facilities. Hong Kong and Greek universities participate again The City University and St. Francis University in Hong Kong, and the University of Ioannina, Arta campus, Greece, participated in the program for a second year. Under the leadership of IEEE Senior Member Paulina Chan and volunteers from the IEEE Hong Kong Section, the City and St. Francis universities jointly held the program in July. They welcomed 55 students ages 12 to 18 from 41 schools. The students attended tutorials on foundational concepts and theories of AI. They worked in small teams on projects using AI-generated images, voice, and music manipulations. They were coached by students from St. Francis and Imperial College London. The participants presented their projects to judges, teachers, and parents. The students also visited a nearby semiconductor equipment manufacturer to learn about technology careers from engineers working there. The results of a post-program survey showed strong satisfaction with OnCampus, with nearly 75 percent of participants giving it a rating of 4 or higher out of 5. “I enjoyed getting to know about deep learning and its application,” one student participant said. “The content of the activity matched my interest, and I gained new knowledge.” “OnCampus is led by a strong team with lots of experts in the field,” another said. “It’s a rare chance for students to use software, learn about the theory behind how deep learning works, and get a glance at future possibilities.” The University of Ioannina hosted the program in Arta in July with support from IEEE Senior Member Stamatis Dragoumanos and IEEE members Nikos Giannakeas and Eleftheria Kallinikou. Nearly 50 students, ages 12 to 16, attended the seven-day event, supported by 17 instructors and six volunteers from the university’s IEEE student branch. The students learned about AI, augmented reality, microchip design, microcontrollers, and 3D printing. They also attended presentations by engineers from the industry. To give the students exposure to real-world engineering, they visited two hydroelectric power plants and a green data center. At the end of the program, students presented their projects and showcased the technical skills they had developed. Those involved in the TryEngineering OnCampus program are proud of the impactful experiences students have gained. The opportunities are possible because universities open their doors, share their expertise, and invest in the next generation of innovators. The University of Zagreb, the Arab Academy for Science, Technology, and Maritime Transport, the Majan University College, and The City University and St. Francis University will be participating again this year. To learn how you can bring the OnCampus program to your educational institution, send a request to tryengineering@ieee.org.
"Two astronauts whose careers embody excellence, leadership, and service."
While the U.S. is currently the global AI tech leader, our advantages will disappear if we don’t take action.
For $7 an hour, virtual assistants use AI tools to write LinkedIn posts and comments on behalf of Western executives.
When Ana Inês Inácio goes to work at the Netherlands Organization for Applied Scientific Research (TNO) in The Hague, she thinks about signals most people never notice: radio waves moving between satellites, sensors, and future wireless networks. The integrated circuits the research scientist designs lay the foundation for next-generation RF sensor systems critical to advancing radar technologies. Ana Inês Inácio EMPLOYER Netherlands Organization for Applied Scientific Research, TNO TITLE Scientist IEEE MEMBER GRADE Senior member ALMA MATER University of Aveiro, in Portugal Those invisible RF signals are only part of what earned the IEEE senior member her global recognition. Inácio recently received the IEEE–Eta Kappa Nu Outstanding Young Professional Award for “leadership in IEEE Young Professionals, fostering innovation and inclusivity, and pioneering advancements in RF sensor systems, bridging technical excellence with impactful community engagement.” The recognition from IEEE’s honor society reflects a career built along two parallel paths: advancing RF circuit design while helping engineers worldwide build professional communities. “I’ve always liked building things,” Inácio says. “Sometimes that means circuits; sometimes it means helping people connect and grow together.” That blend of technical innovation and global leadership gives her work impact far beyond the laboratory. EE lessons at the kitchen table Inácio grew up in Vales do Rio, a rural village near Covilhã in central Portugal. The region was known for farming and textiles, she says. Many residents worked in the textile industry, including her grandfather, who repaired machinery such as industrial looms. He became her first engineering teacher without ever holding the formal title. Through correspondence courses delivered by mail, he taught himself electrical systems. At home, he explained electricity to his granddaughter while he repaired the household’s appliances and wiring. “He would show me why something broke and how we could fix it,” she recalls. It sparked her curiosity. Her mother was a tailor who later managed other tailors. Her father left his factory job to attend culinary school and now cooks at an elder-care facility. Curiosity was a trait that ran through the family. By high school, Inácio was drawn equally to mathematics and physics and to biology and geology, she says. Encouragement from teachers and an uncle, an engineer, ultimately steered her toward electronics engineering. Conducting research on integrated circuits In 2008 she enrolled in an integrated master’s degree program in electrical and telecommunications engineering at the Universidade de Aveiro in Portugal, a five-year degree that combined undergraduate and graduate studies. An opportunity to study abroad changed her path. In 2012 she moved to the Netherlands to study at Eindhoven University of Technology (TU/e) through a six-month European exchange program with UAveiro. A professor encouraged her to stay on, so she completed her final year of masters in the Netherlands. She focused on techniques to improve the linearization of RF power amplifiers at Thales. The company, based in Hengelo, Netherlands, designs and produces electronics for defense and security. She earned her master’s degree from UAveiro in 2013. After graduating, she joined the integrated circuit design group at the University of Twente, in The Netherlands, conducting collaborative research as part of a nationally funded program on linearization techniques for RF front-end systems. The experience introduced her to international research culture and persuaded her to pursue a career abroad, she says. Engineering the future of wireless Inácio joined TNO in 2018 as a junior scientist and innovator: her first professional industry job. Today she designs integrated RF front-end systems—the circuits that allow devices to transmit and receive wireless signals. The components sit at the core of modern communications, enabling sensor networks, satellite links, and emerging 6G technologies. Her work aims to tackle a central challenge: getting greater performance from smaller chips. “As communication evolves, we need more bandwidth to transfer more data at higher speeds,” she says. “The question is how much complexity you can integrate into one system while keeping it efficient.” Unlike commercial lab environments, which reuse established designs, research projects often start from scratch. Each transmit-receive chain—the signal path that converts digital data to radio waves and back again—is tailored to specific requirements. Her work focuses on improving key circuit characteristics including linearity (ensuring that the signals that go out of the antenna are not distorted) as well as noise reduction (so design blocks can be optimized). Advanced design techniques help devices communicate more reliably while consuming less energy, a critical need for large sensor networks such as the Internet of Things, she says. Artificial intelligence is beginning to influence her field, she says: “AI is already helping us work faster. The real challenge is learning how to use it to make better designs, not just quicker ones.” A parallel vocation with IEEE While her technical career flourished in research labs, an additional journey unfolded through IEEE. Inácio joined the organization in 2009 as a student after discovering UAveiro’s student branch. What began as curiosity evolved into a long-term leadership path. She advanced through roles within Region 8—covering Europe, Africa, and the Middle East—one of the organization’s most culturally diverse regions. She was the student branch’s vice chair, and the region’s student representative for more than 22,000 IEEE members. She also served as the Young Professionals Affinity Group chair for the IEEE Benelux Section, which encompasses Belgium, the Netherlands, and Luxembourg. Currently, she serves as the immediate past chair of the Region 8 Young Professionals Committee, and vice chair and IEEE Member and Geographical Activities representative on the IEEE Young Professionals Committee. In those roles, she represents close to 135,000 IEEE members. In addition, she is an active member of the IEEE Microwave Theory and Technology Society, currently serving as its Young Professionals liaison. Her involvement with IEEE has boosted her professional confidence, she says. “IEEE didn’t directly give me promotions at my day job, but it gave me leadership skills, networking opportunities, and the ability to work with people from everywhere,” she says. Those experiences now shape her collaborations at TNO, where international teamwork is essential. The IEEE-HKN Outstanding Young Professional Award recognizes that combination of technical excellence and community impact, she says. Looking back, Inácio sees a clear thread connecting her childhood curiosity, her international career, and her IEEE leadership: Engineering, she says, is ultimately about people as much as it is about technology.
Many of the world’s most advanced electronic systems—including Internet routers, wireless base stations, medical imaging scanners, and some artificial intelligence tools—depend on field-programmable gate arrays. Computer chips with internal hardware circuits, the FPGAs can be reconfigured after manufacturing. On 12 March, an IEEE Milestone plaque recognizing the first FPGA was dedicated at the Advanced Micro Devices campus in San Jose, Calif., the former Xilinx headquarters and the birthplace of the technology. The FPGA earned the Milestone designation because it introduced iteration to semiconductor design. Engineers could redesign hardware repeatedly without fabricating a new chip, dramatically reducing development risk and enabling faster innovation at a time when semiconductor costs were rising rapidly. The ceremony, which was organized by the IEEE Santa Clara Valley Section, brought together professionals from across the semiconductor industry and IEEE leadership. Speakers at the event included Stephen Trimberger, an IEEE and ACM Fellow whose technical contributions helped shape modern FPGA architecture. Trimberger reflected on how the invention enabled software-programmable hardware. Solving computing’s flexibility-performance tradeoff FPGAs emerged in the 1980s to address a core limitation in computing. A microprocessor executes software instructions sequentially, making it flexible but sometimes too slow for workloads requiring many operations at once. At the other extreme, application-specific integrated circuits are chips designed to do only one task. ASICs achieve high efficiency but require lengthy development cycles and nonrecurring engineering costs, which are large, upfront investments. Expenses include designing the chip and preparing it for manufacturing—a process that involves creating detailed layouts, building masks for the fabrication machines, and setting up production lines to handle the tiny circuits. “ASICs can deliver the best performance, but the development cycle is long and the nonrecurring engineering cost can be very high,” says Jason Cong, an IEEE Fellow and professor of computer science at the University of California, Los Angeles. “FPGAs provide a sweet spot between processors and custom silicon.” Cong’s foundational work in FPGA design automation and high-level synthesis transformed how reconfigurable systems are programmed. He developed synthesis tools that translate C/C++ into hardware designs, for example. At the heart of his work is an underlying principle first espoused by electrical engineer Ross Freeman: By configuring hardware using programmable memory embedded inside the chip, FPGAs combine hardware-level speed with the adaptability traditionally associated with software. Silicon Valley origins: the first FPGA The FPGA architecture originated in the mid-1980s at Xilinx, a Silicon Valley company founded in 1984. The invention is widely credited to Freeman, a Xilinx cofounder and the startup’s CTO. He envisioned a chip with circuitry that could be configured after fabrication rather than fixed permanently during creation. Articles about the history of the FPGA emphasize that he saw it as a deliberate break from conventional chip design. At the time, semiconductor engineers treated transistors as scarce resources. Custom chips were carefully optimized so that nearly every transistor served a specific purpose. Freeman proposed a different approach. He figured Moore’s Law would soon change chip economics. The principle holds that transistor counts roughly double every two years, making computing cheaper and more powerful. Freeman posited that as transistors became abundant, flexibility would matter more than perfect efficiency. He envisioned a device composed of programmable logic blocks connected through configurable routing—a chip filled with what he described as “open gates,” ready to be defined by users after manufacturing. Instead of fixing hardware in silicon permanently, engineers could configure and reconfigure circuits as requirements evolved. Freeman sometimes compared the concept to a blank cassette tape: Manufacturers would supply the medium, while engineers determined its function. The analogy captured a profound shift in who controls the technology, shifting hardware design flexibility from chip fabrication facilities to the system designers themselves. In 1985 Xilinx introduced the first FPGA for commercial sale: the XC2064. The device contained 64 configurable logic blocks—small digital circuits capable of performing logical operations—arranged in an 8-by-8 grid. Programmable routing channels allowed engineers to define how signals moved between blocks, effectively wiring a custom circuit with software. Fabricated using a 2-micrometer process (meaning that 2 µm was the minimum size of the features that could be patterned onto silicon using photolithography), the XC2064 implemented a few thousand logic gates. Modern FPGAs can contain hundreds of millions of gates, enabling vastly more complex designs. Yet the XC2064 established a design workflow still used today: Engineers describe the hardware behavior digitally and then “compile the design,” a process that automatically translates the plans into the instructions the FPGA needs to set its logic blocks and wiring, according to AMD. Engineers then load that configuration onto the chip. The breakthrough: hardware defined by memory Earlier programmable logic devices, such as erasable programmable read-only memory, or EPROM, allowed limited customization but relied on largely fixed wiring structures that did not scale well as circuits grew more complex, Cong says. FPGAs introduced programmable interconnects—networks of electronic switches controlled by memory cells distributed across the chip. When powered on, the device loads a bitstream configuration file that determines how its internal circuits behave. “As process technology improved and transistor counts increased, the cost of programmability became much less significant,” Cong says. From “glue logic” to essential infrastructure “Initially, FPGAs were used as what engineers called glue logic,” Cong says. Glue logic refers to simple circuits that connect processors, memory, and peripheral devices so the system works reliably, according to PC Magazine. In other words, it “glues” different components together, especially when interfaces change frequently. Early adopters recognized the advantage of hardware that could adapt as standards evolved. In “The History, Status, and Future of FPGAs,” published in Communications of the ACM, engineers at Xilinx and organizations such as Bell Labs, Fairchild Semiconductor, IBM, and Sun Microsystems said the earliest uses of FPGAs were for prototyping ASICs. They also used it for validating complex systems by running their software before fabrication, allowing the companies to deploy specialized products manufactured in modest volumes. Those uses revealed a broader shift: Hardware no longer needed to remain fixed once deployed. Attendees at the Milestone plaque dedication ceremony included (seated L to R) 2025 IEEE President Kathleen Kramer, 2024 IEEE President Tom Coughlin, and Santa Clara Valley Section Milestones Chair Brian Berg.Douglas Peck/AMD Semiconductor economics changed the equation The rise of FPGAs closely followed changes in semiconductor economics, Cong says. Developing a custom chip requires a large upfront investment before production begins. As fabrication costs increased, products had to ship in large quantities to make ASIC development economically viable, according to a post published by AnySilicon. FPGAs allowed designers to move forward without that larger monetary commitment. ASIC development typically requires 18 to 24 months from conception to silicon, while FPGA implementations often can be completed within three to six months using modern design tools, Cong says. The shorter cycle and the ability to reconfigure the hardware enabled startups, universities, and equipment manufacturers to experiment with advanced architectures that were previously accessible mainly to large chip companies. Lookup tables and the rise of reconfigurable computing A popular technique for implementing mathematical functions in hardware is the lookup table (LUT). A LUT is a small memory element that stores the results of logical operations, according to “LUT-LLM: Efficient Large Language Model Inference with Memory-based Computations on FPGAs,” a paper selected for presentation next month at the 34th IEEE International Symposium on Field-Programmable Custom Computing Machines (FCCM). Instead of repeatedly recalculating outcomes, the chip retrieves answers directly from memory. Cong compares the approach to consulting multiplication tables rather than recomputing the arithmetic each time. Research led by Cong and others helped develop efficient methods for mapping digital circuits onto LUT-based architectures, shaping routing and layout strategies used in modern devices. As transistor budgets expanded, FPGA vendors integrated memory blocks, digital signal-processing units, high-speed communication interfaces, cryptographic engines, and embedded processors, transforming the devices into versatile computing platforms. Why the gate arrays are distinct from CPUs, GPUs, and ASICs FPGAs coexist with other processors because each one optimizes different priorities. Central processing units excel at general computing. Graphics processing units, designed to perform many calculations simultaneously, dominate large parallel workloads such as AI training. ASICs provide maximum efficiency when designs remain stable and production volumes are high. “ASICs can deliver the best performance, but the development cycle is long, and the nonrecurring engineering cost can be very high. FPGAs provide a sweet spot between processors and custom silicon.” —Jason Cong, IEEE Fellow and professor of computer science at UCLA. “FPGAs are not replacements for CPUs or GPUs,” Cong says. “They complement those processors in heterogeneous computing systems.” Modern computing platforms increasingly combine multiple types of processors to balance flexibility, performance, and energy efficiency. A Milestone for an idea, not just a device This IEEE Milestone recognizes more than a successful semiconductor product. It also acknowledges a shift in how engineers innovate. Reconfigurable hardware allows designers to test ideas quickly, refine architectures, and deploy systems while standards and markets evolve. “Without FPGAs,” Cong says, “the pace of hardware innovation would likely be much slower.” Four decades after the first FPGA appeared, the technology’s enduring legacy reflects Freeman’s insight: Hardware did not need to remain fixed. By accepting a small amount of unused silicon in exchange for adaptability, engineers transformed chips from static products into platforms for continuous experimentation—turning silicon itself into a medium engineers could rewrite. Among those who attended the Milestone ceremony were 2025 IEEE President Kathleen Kramer; 2024 IEEE President Tom Coughlin; Avery Lu, chair of the IEEE Santa Clara Valley Section; and Brian Berg, history and milestones chair of IEEE Region 6. They joined AMD’s chief executive, Lisa Su, and Salil Raje, senior vice president and general manager of adaptive and embedded computing at AMD. The IEEE Milestone plaque honoring the field-programmable gate array reads: “The FPGA is an integrated circuit with user-programmable Boolean logic functions and interconnects. FPGA inventor Ross Freeman cofounded Xilinx to productize his 1984 invention, and in 1985 the XC2064 was introduced with 64 programmable 4-input logic functions. Xilinx’s FPGAs helped accelerate a dramatic industry shift wherein ‘fabless’ companies could use software tools to design hardware while engaging ‘foundry’ companies to handle the capital-intensive task of manufacturing the software-defined hardware.” Administered by the IEEE History Center and supported by donors, the IEEE Milestone program recognizes outstanding technical developments worldwide that are at least 25 years old. Check out Spectrum’s History of Technology channel to read more stories about key engineering achievements.