Ars Technica
중도 성향
IT/기술
Review: Spider-Noir recaptures the magic of a bygone era
Nicolas Cage was born to play 1930s PI Ben Reilly/The Spider: part Bogart, part Bugs Bunny, 100% Cage-y.
🇺🇸 미국 · IT/기술 · "CAPTURES" · 총 5건
필터 보기현재 지수
50.0
0 = 부정 우세
50 = 중립
100 = 긍정 우세
최근 7일 기준 11,800건을 분석한 결과, 뉴스 심리지수는 50.0(균형)입니다. 긍정 1건(0.0%)·중립 11,798건(100.0%)·부정 1건(0.0%)이며, 중립 비중이 뚜렷하게 높습니다. 성향 지수는 종합 18.9(중도 균형)입니다.
Nicolas Cage was born to play 1930s PI Ben Reilly/The Spider: part Bogart, part Bugs Bunny, 100% Cage-y.
The listing for a newly restored three-bedroom home captures San Francisco's AI-fueled real estate frenzy in one line.
SOND introduced its debut product: Dreambuds, a closed-loop, in-ear system that captures 12 physiological signals from the wearer, then acts on them in real time to help consumers get better sleep.
This article is brought to you by DAIMON Robotics. This April, Hong Kong-based DAIMON Robotics has released Daimon-Infinity, which it describes as the largest omni-modal robotic dataset for physical AI, featuring high resolution tactile sensing and spanning a wide range of tasks from folding laundry at home to manufacturing on factory assembly lines. The project is supported by collaborative efforts of partners across China and the globe, including Google DeepMind, Northwestern University, and the National University of Singapore. The move signals a key strategic initiative for DAIMON, a two-and-a-half-year-old company known for its advanced tactile sensor hardware, most notably a monochromatic, vision-based tactile sensor that packs over 110,000 effective sensing units into a fingertip-sized module. Drawing on its high-resolution tactile sensing technology and a distributed out-of-lab collection network capable of generating millions of hours of data annually, DAIMON is building large-scale robot manipulation datasets that include vast amounts of tactile sensing data. To accelerate the real-world deployment of embodied AI, the company has also open-sourced 10,000 hours of its data. Prof. Michael Yu Wang, co-founder and chief scientist at DAIMON Robotics, has pioneered Vision-Tactile-Language-Action (VTLA) architecture, elevating the tactile to a modality on par with vision.DAIMON Robotics Behind the strategy is Prof. Michael Yu Wang, DAIMON’s co-founder and chief scientist. Prof. Wang earned his PhD at Carnegie Mellon — studying manipulation under Matt Mason — and went on to found the Robotics Institute at the Hong Kong University of Science and Technology. An IEEE Fellow and former Editor-in-Chief of IEEE Transactions on Automation Science and Engineering, he has spent roughly four decades in the field. His objective is to address the missing “insensitivity” of robot manipulation, which practically relies on the dominant Vision-Language-Action (VLA) model. He and his team have pioneered Vision-Tactile-Language-Action (VTLA) architecture, elevating the tactile to a modality on par with vision. We spoke with Prof. Wang about how tactile feedback aims to change dexterous manipulation, how the dataset initiative is foreseen to improve our understanding of robotic hands in natural environments, and where — from hotels to convenience stores in China — he sees touch-enabled robots making their first real-world inroads. Daimon-Infinity is the world’s largest omni-modal dataset for Physical AI, featuring million-hour scale multimodal data, ultra-high-res tactile feedback, data from 80+ real scenarios and 2,000+ human skills, and more.DAIMON Robotics The Dataset Initiative This month, DAIMON Robotics released the largest and most comprehensive robotic manipulation dataset with multiple leading academic institutions and enterprises. Why releasing the dataset now, rather than continuing to focus on product development? What impact will this have on the embodied intelligence industry? DAIMON Robotics has been around for almost two and a half years. We have been committed to developing high-resolution, multimodal tactile sensing devices to perceive the interaction between a robot’s hand (particularly its fingertips) and objects. Our devices have become quite robust. They are now accepted and used by a large segment of users, including academic and research institutes as well as leading humanoid robotics companies. As embodied AI continues to advance, the critical role of data has been clearer. Data scarcity remains a primary bottleneck in robot learning, particularly the lack of physical interaction data, which is essential for robots to operate effectively in the real world. Consequently, data quality, reliability, and cost have become major concerns in both research and commercial development. This is exactly where DAIMON excels. Our vision-based tactile technology captures high-quality, multimodal tactile data. Beyond basic contact forces, it records deformation, slip and friction, material properties and surface textures — enabling a comprehensive reconstruction of physical interactions. Building on our expertise in multimodal fusion, we have developed a robust data processing pipeline that seamlessly integrates tactile feedback with vision, motion trajectories, and natural language, transforming raw inputs into training-ready dataset for machine learning models. Recognizing the industry-wide data gap, we view large-scale data collection not only as our unique competitive advantage, but as a responsibility to the broader community. By building and open-sourcing the dataset, we aim to provide the high-quality “fuel” needed to power embodied AI, ultimately accelerating the real-world deployment of general-purpose robotic foundation models. The robotics industry is highly competitive, and many teams have chosen to focus on data. DAIMON is releasing a large and highly comprehensive cross-embodiment, vision-based tactile multimodal robotic manipulation dataset. How were you able to achieve this? We have a dedicated in-house team focused on expanding our capabilities, including building hardware devices and developing our own large-scale model. Although we are a relatively small company, our core tactile sensing technology and innovative data collection paradigm enable us to build large-scale dataset. Our approach is to broaden our offering. We have built the world’s largest distributed out-of-lab data collection network. Rather than relying on centralized data factories, this lightweight and scalable system allows data to be gathered across diverse real-world environments, enabling us to generate millions of hours of data per year. “To drive the advancement of the entire embodied AI field, we have open-sourced 10,000 hours of the dataset for the broader community.” —Prof. Michael Yu Wang, DAIMON Robotics This dataset is being jointly developed with several institutions worldwide. What roles did they play in its development, and how will the dataset benefit their research and products? Besides China based teams, our partners include leading research groups from universities, such as Northwestern University and the National University of Singapore, as well as top global enterprises like Google DeepMind and China Mobile. Their decision to partner with DAIMON is a strong testament to the value of our tactile-rich dataset. Among the companies involved there are some that have already built their own models but are now incorporating tactile information. By deploying our data collection devices across research, manufacturing and other real-world scenarios, they help us to gather highly practical, application-driven data. In turn, our partners leverage the data to train models tailored to their specific use cases. Furthermore, to drive the advancement of the entire embodied AI field, we have open-sourced 10,000 hours of the dataset for the broader community. Equipped with Daimon’s visuotactile sensor, the gripper delicately senses contact and precisely controls force to pick up a fragile eggshell.Daimon Robotics From VLA to VTLA: Why Tactile Sensing Changes the Equation The mainstream paradigm in robotics is currently the Vision-Language-Action (VLA) model, but your team has proposed a Vision-Tactile-Language-Action (VTLA) model. Why is it necessary to incorporate tactile sensing? What does it enable robots to achieve, and which tasks are likely to fail without tactile feedback? Over these years of working to make generalist robots capable of performing manipulation tasks, especially dexterous manipulation — not just power grasping or holding an object, but manipulating objects and using tools to impart forces and motion onto parts — we see these robots being used in household as well as industrial assembly settings. It is well established that tactile information is essential for providing feedback about contact states so that robots can guide their hands and fingers to perform reliable manipulation. Without tactile sensing, robots are severely limited. They struggle to locate objects in dark environments, and without slip detection, they can easily drop fragile items like glass. Furthermore, the inability to precisely control force often leads to failed manipulation tasks or, in severe cases, physical damage. Naturally, the VLA approach needs to be enhanced to incorporate tactile information. We expanded the VLA framework to incorporate tactile data, creating the VTLA model. An additional benefit of our tactile sensor is that it is vision-based: We capture visual images of the deformation on the fingertip surface. We capture multiple images in a time sequence that encodes contact information, from which we can infer forces and other contact states. This aligns well with the visual framework that VLA is based upon. Having tactile information in a visual image format makes it naturally suitable for integration into the VLA framework, transforming it into a VTLA system. That is the key advantage: Vision-based tactile sensors provide very high resolution at the pixel level, and this data can be incorporated into the framework, whether it is an end-to-end model or another type of architecture. DAIMON has been known for its vision-based tactile sensors that can pack over 110,000 effective sensing units.DAIMON Robotics The Technology: Monochromatic Vision-based Tactile Sensing You and your team have spent many years deeply engaged in vision-based tactile sensing and have developed the world’s first monochromatic vision-based tactile sensing technology. Why did you choose this technical path? Once we started investigating tactile sensors, we understood our needs. We wanted sensors that closely mimic what we have under our fingertip skin. Physiological studies have well documented the capabilities humans have at their fingertips — knowing what we touch, what kind of material it is, how forces are distributed, and whether it is moving into the right position as our brain controls our hands. We knew that replicating these capabilities on a robot hand’s fingertips would help considerably. When we surveyed existing technologies, we found many types, including vision-based tactile sensors with tri-color optics and other simpler designs. We decided to integrate the best of these into an engineering-robust solution that works well without being overly complicated, keeping cost, reliability, and sensitivity within a satisfactory range, thus ultimately developing a monochromatic vision-based tactile sensing technique. This is fundamentally an engineering approach rather than a purely scientific one, since a great deal of foundational research already existed. With the growing realization of the necessity of tactile data, all of this will advance hand in hand. DAIMON vision-based tactile sensor captures high-quality, multimodal tactile data.DAIMON Robotics Last year, DAIMON launched a multi-dimensional, high-resolution, high-frequency vision-based tactile sensor. Compared with traditional tactile sensors, where does its core advantage lie? Which industries could it potentially transform? The key features of our sensors are the density of distributed force measurement and the deformation we can capture over the area of a fingertip. I believe we have the highest density in terms of sensing units. That is one very important metric. The other is dynamics: the frequency and bandwidth — how quickly we can detect force changes, transmit signals, and process them in real time. Other important aspects are largely engineering-related, such as reliability, drift, durability of the soft surface, and resistance to interference from magnetic, optical, or environmental factors. A growing number of researchers and companies are recognizing the importance of tactile sensing and adopting our technology. I believe the advances in tactile sensing will elevate the entire community and industry to a higher level. One of our potential customers is deploying humanoid robots in a small convenience store, with densely packed shelves where shelf space is at a premium. The robot needs to reach into very tight spaces — tighter than books on a shelf — to pick out an object. Current two-jaw parallel grippers cannot fit into most of these spaces. Observing how humans pick up objects, you clearly need at least three slim fingers to touch and roll the object toward you and secure it. Thus, we are starting to see very specific needs where tactile sensing capabilities are essential. From Academia to Startup After 40 years in academia — founding the HKUST Robotics Institute, earning prestigious honors including IEEE Fellow, and serving as Editor-in-Chief of IEEE TASE — what motivated you to found DAIMON Robotics? I have come a long way. I started learning robotics during my PhD at Carnegie Mellon, where there were truly remarkable groups working on locomotion under Marc Raibert, who founded Boston Dynamics, and on manipulation under my advisor, Matt Mason, a leader in the field. We have been working on dexterous manipulation, not only at Carnegie Mellon, but globally for many years. However, progress has been limited for a long time, especially in building dexterous hands and making them work. Only recently have locomotion robots truly taken off, and only in the last few years have we begun to see major advancements in robot hands. There is clearly room for advancing manipulation capabilities, which would enable robots to do work like humans. While at Hong Kong University of Science and Technology, I saw increasingly greater people entering this area in the form of students and postdoctoral researchers. We wanted to jumpstart our effort by leveraging the available capital and talent resources. Fortunately, one of my postdocs, Dr. Duan Jianghua, has a strong sense for commercial opportunities. Recognizing the rapid growth of robotics market and the unique value that our vision-based tactile sensing technology could bring, together we started DAIMON Robotics, and it has progressed well. The community has grown tremendously in China, Japan, Korea, the U.S., and Europe. Robots equipped with DAIMON technology have been deployed in factory settings. The company aims to enable robots to achieve “embodied intelligence” and close the gap between what they can see and what they can feel.DAIMON Robotics Business Model and Commercial Strategy What is DAIMON’s current business model and strategic focus? What role does the dataset release play in your commercial strategy? We started as a device company focused on making highly capable tactile sensors, especially for robot hands. But as technology and business developed, everyone realized it is not just about one component, rather the entire technology chain: devices, data of adequate quality and quantity, and finally the right framework to build, train, and deploy models on robots in real application environments. Our business strategy is best described as “3D”: Devices, Data, and Deployment. We build devices for data collection, our own ecosystem, and for deploying them in our partners’ potential application domains. This enables the collection of real-world tactile-rich data and complete closed-loop validation. This will become an integral part of the 3D business model. Most startups in this space are following a similar path until eventually some may become more specialized or more tightly integrated with other companies. For now, it is mostly vertical integration. Embodied Skills and the Convergence Moment You’ve introduced the concept of “embodied skills” as essential for humanoid robots to move beyond having just an advanced AI “brain.” What prompted this insight? What new capabilities could embodied skills enable? After the rapid evolution of models and hardware over the past two years, has your definition or roadmap for embodied skills evolved? We have come a long way now see a convergence point where electrical, electronic, and mechatronic hardware technologies have advanced tremendously in last two decades. Robots are now fully electric, do not require hydraulics, because hardware has evolved rapidly. Modern electronics provide tremendous bandwidth with high torques. If we can build intelligence into these systems, we can create truly humanoid robots with the ability to operate in unstructured environments, make decisions, and take actions autonomously. “Our vision is for robots to achieve robust manipulation capabilities and evolve into reliable partners for humans.” —Prof. Michael Yu Wang, DAIMON Robotics AI has arrived at exactly the right time. Enormous resources have been invested in AI development, especially large language models, which are now being generalized into world models that enable physical AI capabilities. We would like to see these manifested in real-world systems. While both AI and core hardware technologies continue to evolve, the focus is much clearer now. For example, human-sized robots are preferred in a home environment. This is an exciting domain with a promise of great societal benefit if we can eventually achieve safe, reliable, and cost-effective robots. The Road to Real-World Deployment Today, many robots can deliver impressive demos, yet there remains a gap before they truly enter real-world applications. What could be a potential trigger for real-world deployment? Which scenarios are most likely to achieve large-scale deployment first? I think the road toward large-scale deployment of generalist robots is still long, but we are starting to see signs of feasibility within specific domains. It is very similar to autonomous vehicles, where we are yet to see full deployment of robo-taxis, while we have already started to find mobile robots and smaller vehicles widely deployed in the hospitality industry. Virtually every major hotel in China now has a delivery robot — no arms, just a vehicle that picks up items from the hotel lobby (e.g., food deliveries). The delivery person just loads the food and selects the room number. It is up to the robot thereafter to navigate and reach the guest’s room, which includes using the elevator, to deliver the food. This is already nearly 100 percent deployed in major Chinese hotels. Hotel and restaurant robots are viewed as a model for deploying humanoid robots in specific domains like overnight drugstores and convenience stores. I expect complete deployment in such settings within a short timeframe, followed by other applications. Overall, we can expect autonomous robots, including humanoids, to progressively penetrate specific sectors, delivering value in each and expanding into others. Ultimately, our vision is for robots to achieve robust manipulation capabilities and evolve into reliable partners for humans. By seamlessly integrating into our homes and daily lives, they will genuinely benefit and serve humanity. This interview has been edited for length and clarity.
When it comes to AI models, size matters. Even though some artificial-intelligence experts warn that scaling up large language models (LLMs) is hitting diminishing performance returns, companies are still coming out with ever larger AI tools. Meta’s latest Llama release had a staggering 2 trillion parameters that define the model. As models grow in size, their capabilities increase. But so do the energy demands and the time it takes to run the models, which increases their carbon footprint. To mitigate these issues, people have turned to smaller, less capable models and using lower-precision numbers whenever possible for the model parameters. But there is another path that may retain a staggeringly large model’s high performance while reducing the time it takes to run an energy footprint. This approach involves befriending the zeros inside large AI models. For many models, most of the parameters—the weights and activations—are actually zero, or so close to zero that they could be treated as such without losing accuracy. This quality is known as sparsity. Sparsity offers a significant opportunity for computational savings: Instead of wasting time and energy adding or multiplying zeros, these calculations could simply be skipped; rather than storing lots of zeros in memory, one need only store the nonzero parameters. Unfortunately, today’s popular hardware, like multicore CPUs and GPUs, do not naturally take full advantage of sparsity. To fully leverage sparsity, researchers and engineers need to rethink and re-architect each piece of the design stack, including the hardware, low-level firmware, and application software. In our research group at Stanford University, we have developed the first (to our knowledge) piece of hardware that’s capable of calculating all kinds of sparse and traditional workloads efficiently. The energy savings varied widely over the workloads, but on average our chip consumed one-seventieth the energy of a CPU, and performed the computation on average eight times as fast. To do this, we had to engineer the hardware, low-level firmware, and software from the ground up to take advantage of sparsity. We hope this is just the beginning of hardware and model development that will allow for more energy-efficient AI. What is sparsity? Neural networks, and the data that feeds into them, are represented as arrays of numbers. These arrays can be one-dimensional (vectors), two-dimensional (matrices), or more (tensors). A sparse vector, matrix, or tensor has mostly zero elements. The level of sparsity varies, but when zeroes make up more than 50 percent of any type of array, it can stand to benefit from sparsity-specific computational methods. In contrast, an object that is not sparse—that is, it has few zeros compared with the total number of elements—is called dense. Sparsity can be naturally present, or it can be induced. For example, a social-network graph will be naturally sparse. Imagine a graph where each node (point) represents a person, and each edge (a line segment connecting the points) represents a friendship. Since most people are not friends with one another, a matrix representing all possible edges will be mostly zeros. Other popular applications of AI, such as other forms of graph learning and recommendation models, contain naturally occurring sparsity as well. Beyond naturally occurring sparsity, sparsity can also be induced within an AI model in several ways. Two years ago, a team at Cerebras showed that one can set up to 70 to 80 percent of parameters in an LLM to zero without losing any accuracy. Cerebras demonstrated these results specifically on Meta’s open-source Llama 7B model, but the ideas extend to other LLM models like ChatGPT and Claude. The case for sparsity Sparse computation’s efficiency stems from two fundamental properties: the ability to compress away zeros and the convenient mathematical properties of zeros. Both the algorithms used in sparse computation and the hardware dedicated to them leverage these two basic ideas. First, sparse data can be compressed, making it more memory efficient to store “sparsely”—that is, in something called a sparse data type. Compression also makes it more energy efficient to move data when dealing with large amounts of it. This is best understood by an example. Take a four-by-four matrix with three nonzero elements. Traditionally, this matrix would be stored in memory as is, taking up 16 spaces. This matrix can also be compressed into a sparse data type, getting rid of the zeros and saving only the nonzero elements. In our example, this results in 13 memory spaces as opposed to 16 for the dense, uncompressed version. These savings in memory increase with increased sparsity and matrix size. In addition to the actual data values, compressed data also requires metadata. The row and column locations of the nonzero elements also must be stored. This is usually thought of as a “fibertree”: The row labels containing nonzero elements are listed and linked to the column labels of the nonzero elements, which are then linked to the values stored in those elements. In memory, things get a bit more complicated still: The row and column labels for each nonzero value must be stored as well as the “segments” that indicate how many such labels to expect, so the metadata and data can be clearly delineated from one another. In a dense, noncompressed matrix data type, values can be accessed either one at a time or in parallel, and their locations can be calculated directly with a simple equation. However, accessing values in sparse, compressed data requires looking up the coordinates of the row index and using that information to “indirectly” look up the coordinates of the column index before finally reaching the value. Depending on the actual locations of the sparse data values, these indirect lookups can be extremely random, making the computation data-dependent and requiring the allocation of memory lookups on the fly. Second, two mathematical properties of zero let software and hardware skip a lot of computation. Multiplying any number by zero will result in a zero, so there’s no need to actually do the multiplication. Adding zero to any number will always return that number, so there’s no need to do the addition either. In matrix-vector multiplication, one of the most common operations in AI workloads, all computations except those involving two nonzero elements can simply be skipped. Take, for example, the four-by-four matrix from the previous example and a vector of four numbers. In dense computation, each element of the vector must be multiplied by the corresponding element in each row and then added together to compute the final vector. In this case, that would take 16 multiplication operations and 16 additions (or four accumulations). In sparse computation, only the nonzero elements of the vector need be considered. For each nonzero vector element, indirect lookup can be used to find any corresponding nonzero matrix element, and only those need to be multiplied and added. In the example shown here, only two multiplication steps will be performed, instead of 16. The trouble with GPUs and CPUs Unfortunately, modern hardware is not well suited to accelerating sparse computation. For example, say we want to perform a matrix-vector multiplication. In the simplest case, in a single CPU core, each element in the vector would be multiplied sequentially and then written to memory. This is slow, because we can do only one multiplication at a time. So instead people use CPUs with vector support or GPUs. With this hardware, all elements would be multiplied in parallel, greatly speeding up the application. Now, imagine that both the matrix and vector contain extremely sparse data. The vectorized CPU and GPU would spend most of their efforts multiplying by zero, performing completely ineffectual computations. Newer generations of GPUs are capable of taking some advantage of sparsity in their hardware, but only a particular kind, called structured sparsity. Structured sparsity assumes that two out of every four adjacent parameters are zero. However, some models benefit more from unstructured sparsity—the ability for any parameter (weight or activation) to be zero and compressed away, regardless of where it is and what it is adjacent to. GPUs can run unstructured sparse computation in software, for example, through the use of the cuSparse GPU library. However, the support for sparse computations is often limited, and the GPU hardware gets underutilized, wasting energy-intensive computations on overhead. Petra Péterffy When doing sparse computations in software, modern CPUs may be a better alternative to GPU computation, because they are designed to be more flexible. Yet, sparse computations on the CPU are often bottlenecked by the indirect lookups used to find nonzero data. CPUs are designed to “prefetch” data based on what they expect they’ll need from memory, but for randomly sparse data, that process often fails to pull in the right stuff from memory. When that happens, the CPU must waste cycles calling for the right data. Apple was the first to speed up these indirect lookups by supporting a method called an array-of-pointers access pattern in the prefetcher of their A14 and M1 chips. Although innovations in prefetching make Apple CPUs more competitive for sparse computation, CPU architectures still have fundamental overheads that a dedicated sparse computing architecture would not, because they need to handle general-purpose computation. Other companies have been developing hardware that accelerates sparse machine learning as well. These include Cerebras’s Wafer Scale Engine and Meta’s Training and Inference Accelerator (MTIA). The Wafer Scale Engine, and its corresponding sparse programming framework, have shown incredibly sparse results of up to 70 percent sparsity on LLMs. However, the company’s hardware and software solutions support only weight sparsity, not activation sparsity, which is important for many applications. The second version of the MTIA claims a sevenfold sparse compute performance boost over the MTIA v1. However, the only publicly available information regarding sparsity support in the MTIA v2 is for matrix multiplication, not for vectors or tensors. Although matrix multiplications take up the majority of computation time in most modern ML models, it’s important to have sparsity support for other parts of the process. To avoid switching back and forth between sparse and dense data types, all of the operations should be sparse. Onyx Instead of these halfway solutions, our team at Stanford has developed a hardware accelerator, Onyx, that can take advantage of sparsity from the ground up, whether it’s structured or unstructured. Onyx is the first programmable accelerator to support both sparse and dense computation; it’s capable of accelerating key operations in both domains. To understand Onyx, it is useful to know what a coarse-grained reconfigurable array (CGRA) is and how it compares with more familiar hardware, like CPUs and field-programmable gate arrays (FPGAs). CPUs, CGRAs, and FPGAs represent a trade-off between efficiency and flexibility. Each individual logic unit of a CPU is designed for a specific function that it performs efficiently. On the other hand, since each individual bit of an FPGA is configurable, these arrays are extremely flexible, but very inefficient. The goal of CGRAs is to achieve the flexibility of FPGAs with the efficiency of CPUs. CGRAs are composed of efficient and configurable units, typically memory and compute, that are specialized for a particular application domain. This is the key benefit of this type of array: Programmers can reconfigure the internals of a CGRA at a high level, making it more efficient than an FPGA but more flexible than a CPU. The Onyx chip, built on a coarse-grained reconfigurable array (CGRA), is the first (to our knowledge) to support both sparse and dense computations. Olivia Hsu Onyx is composed of flexible, programmable processing element (PE) tiles and memory (MEM) tiles. The memory tiles store compressed matrices and other data formats. The processing element tiles operate on compressed matrices, eliminating all unnecessary and ineffectual computation. The Onyx compiler handles conversion from software instructions to CGRA configuration. First, the input expression—for instance, a sparse vector multiplication—is translated into a graph of abstract memory and compute nodes. In this example, there are memories for the input vectors and output vectors, a compute node for finding the intersection between nonzero elements, and a compute node for the multiplication. The compiler figures out how to map the abstract memory and compute nodes onto MEMs and PEs on the CGRA, and then how to route them together so that they can transfer data between them. Finally, the compiler produces the instruction set needed to configure the CGRA for the desired purpose. Since Onyx is programmable, engineers can map many different operations, such as vector-vector element multiplication, or the key tasks in AI, like matrix-vector or matrix-matrix multiplication, onto the accelerator. We evaluated the efficiency gains of our hardware by looking at the product of energy used and the time it took to compute, called the energy-delay product (EDP). This metric captures the trade-off of speed and energy. Minimizing just energy would lead to very slow devices, and minimizing speed would lead to high-area, high-power devices. Onyx achieves up to 565 times as much energy-delay product over CPUs (we used a 12-core Intel Xeon CPU) that utilize dedicated sparse libraries. Onyx can also be configured to accelerate regular, dense applications, similar to the way a GPU or TPU would. If the computation is sparse, Onyx is configured to use sparse primitives, and if the computation is dense, Onyx is reconfigured to take advantage of parallelism, similar to how GPUs function. This architecture is a step toward a single system that can accelerate both sparse and dense computations on the same silicon. Just as important, Onyx enables new algorithmic thinking. Sparse acceleration hardware will not only make AI more performance- and energy efficient but also enable researchers and engineers to explore new algorithms that have the potential to dramatically improve AI. The future with sparsity Our team is already working on next-generation chips built off of Onyx. Beyond matrix multiplication operations, machine learning models perform other types of math, like nonlinear layers, normalization, the softmax function, and more. We are adding support for the full range of computations on our next-gen accelerator and within the compiler. Since sparse machine learning models may have both sparse and dense layers, we are also working on integrating the dense and sparse accelerator architecture more efficiently on the chip, allowing for fast transformation between the different data types. We’re also looking at ways to manage memory constraints by breaking up the sparse data more effectively so we can run computations on several sparse accelerator chips. We are also working on systems that can predict the performance of accelerators such as ours, which will help in designing better hardware for sparse AI. Longer term, we’re interested in seeing whether high degrees of sparsity throughout AI computation will catch on with more model types, and whether sparse accelerators become adopted at a larger scale. Building the hardware to unstructured sparsity and optimally take advantage of zeros is just the beginning. With this hardware in hand, AI researchers and engineers will have the opportunity to explore new models and algorithms that leverage sparsity in novel and creative ways. We see this as a crucial research area for managing the ever-increasing runtime, costs, and environmental impact of AI.