Long baseline optical interferometric imaging with active phase stabilization

Astronomical observations allow us to better our understanding of the universe.

As we observe smaller and more distance features, we run into the diffraction limit of our observation system.

This limit is a function of the wavelength observed and the size of the primary aperture used.

We can synthesize a larger primary aperture by implementing interferometry.

Long baseline optical interferometry would lead to significant improvements in astronomical imaging resolution.

Building optical interferometers with free space baselines becomes significantly more difficult as the baseline increases.

A promising alternative is to use optical fiber to connect telescopes.

Fiber-based interferometers are much more susceptible to phase noise than their free-space counterparts due to inhomogeneities in the fiber medium.

This leads to significant degradation of interferometric signals used for astronomical measurements.

We implement phase stabilization techniques used in quantum communications to stabilize an optical interferometer with a 170km pseudo-baseline.

We use a quantum optimal measurement technique with this interferometer to resolve the extent of a source four times smaller than the diffraction limit of the system within 1.5% error.

These results bring the potential for a full-scale on-sky long baseline interferometer significantly closer.

A 350km baseline optical interferometer at 1550nm would allow us to resolve sub microarcsecond features in the universe.