Real-Time FPGA-Based SiPM Detector Emulation Using a Temporally Quantized Model

We present a real-time hardware implementation of a versatile detector emulator capable of reproducing realistic silicon photomultiplier signals.

Our approach builds upon the open-source SimSiPM framework, originally developed to simulate the microscopic response of silicon photomultipliers, including photon detection efficiency, optical crosstalk, afterpulsing, and dark counts.

SimSiPM provides idealized photon-level data with arbitrary temporal and amplitude resolution.

In contrast, our emulator, built on a field-programmable gate array, translates this fine-grained simulation into physically realizable analog signals, maintaining real-time operation and finite hardware resolution.

The system receives simulated photon events either via a 10-gigabit Ethernet stream or directly from the processing system of a system-on-chip, and performs on-chip temporal quantization, dividing time into bins equal to one clock cycle.

All photon hits within a bin are accumulated, and their contribution is combined through a weighted temporal averaging scheme that preserves sub-bin precision.

Signal shaping is executed entirely in hardware, using parallel one-pole recursive filters that synthesize the rise and the two decay components of the response.

The resulting waveform is converted to analog through dual 16-bit digital-to-analog converters operating at 2.5 gigasamples per second.

This architecture generates physically accurate detector signals in real time, rather than replaying precomputed waveforms.

It also generalizes beyond silicon photomultipliers, providing a flexible framework for hardware-in-the-loop testing of front-end electronics.

The proposed implementation demonstrates high throughput, low latency, and minimal processor overhead.