학술

A Volume of Fluid Immersed Boundary Method for Industrial Polymer Mixing

arXiv Physics
CC BY
이 매체는 공공·자유 라이선스로 본문을 직접 표시합니다.

Abstract

Free-surface numerical simulation of polymer mixing processes requires handling rotating solid boundaries of complex shapes as well as kinematic viscosity ratios between polymer melt and air up to $10^8$.

We present a finite volume method that couples a Volume of Fluid (VOF) interface-capturing scheme with a non-conforming immersed boundary (IB) method, so that moving screws are represented on a fixed mesh without remeshing.

In standard segregated VOF solvers, part of the viscous stress is treated explicitly, which can lead to instabilities and severe time-step restrictions at such viscosity ratios.

To address this limitation, we integrate into the VOF-IB framework a block-coupled (BC) scheme in which the full viscous stress, including its transposed-gradient part, is treated implicitly.

The method is implemented in the finite volume library OpenFOAM.

On a three-dimensional injection-molding test case with a generalized Newtonian melt, segregated solvers either diverge or produce spurious air-phase velocities at the time steps allowed by the block-coupled solver, which instead yields a physical solution and reduces the computing time by a factor of about 2.7 with respect to the fastest segregated run that remains physical.

On the finer grid, the IB solution agrees with the conforming-mesh solution within 2% in velocity and 0.5% in pressure drop.

The BC-VOF-IB solver is then applied to single- and twin-screw extruders under fully and partially filled conditions, capturing the filling dynamics and the resulting pressure build-up along the screw, demonstrating the applicability of the method to industrial geometries.

The current formulation is isothermal; its extension to non-isothermal flows, required for quantitative prediction of melt temperature and viscous heating, is the subject of ongoing work.

관련 뉴스